Having problems with your Dyson DC07 Animal Bagless Upright Cyclonic Vacuum ?

Dyson Animal 07 beater bar not spinning - belt not broken

\015 I've taken the soleplate off and cleaned the beater bar very well, but the belt is just not turning. Any ideas what could be causing this?\015

Answers :

If your unit has a clutch it maybe that it is in the off position or the motor belt is broken your unit has to belts if its a clutched model 
Repair Help & Product Troubleshooting for Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Beater bar not spinning on my dyson animal DC14. Motor turns on and sounds good. My belt is not broken, and still tight on the bar. It looks like another possible belt or gear box between motor and bar. Can anyone please point me to next step?


... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Dyson Animal 07 beater bar not spinning - belt not broken


If your unit has a clutch it maybe that it is in the off position or the motor belt is broken your unit has to belts if its a clutched model  ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Beater bar belt needs replacedon a dyson DC14 animal


Remove the glide plate at the bottom of rhe machine. Remove brush and broken belt. Fit new belt and re install brush. Fit glide plate, job done.Its in the instruction book ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

We have a dyson dc14 and the beater bar stopped turning, we cleaned the bar off and checked the belt and it's not broken, I know I called Dyson a year or two ago and they told me how to reset the beater bar motor but I don't remember exactly what I did, anyone know the answer to this??? thanks in advance....


Hi its Darran at Dyson.Check that the brush control dial is in the centre position when the machine is locked upright. When you release the head and pull the handle back this dial should mopve forward to the on position. Once here, the ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

My husband ran over my daughters shirt with our Dyson DC17 animal. Now it's making this horrible load ratting noise. I've taken the head off. Clean the beater bar. The belt is in tact. No


First make sure there are not any of the rubber cogs missing from the belt, it may be wise to replace the belt anyway because the cogs may be worn. Make sure the brush roll does not have any play in it anywhere and that It fits tightly in the nozzle ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Belt how do you change the belt on the beater bar; dyson animal dc 07


Http://video.aol.com/video-detail/dyson-not-picking-up-dirt-no-suction-how-to-repair/2334249387 ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

DYSON 28 ANIMAL BEATER BAR NOT SPINNING - Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum


Hi there,I'm sorry to hear you're having difficulties with your DC28. The machine is equipped with a sensor which shuts off the brushbar if something jams it. Once you've checked the cleaner head for obstructions, and removed any threads or h ... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

Dyson beater bar won't spin - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


Hi its Darran at Dyson. \012he first check is to ensure that the brush control dial is set to the correct centre position when the machnie is locked upright. When you release the head the dial should move forward to the on position and th ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Beater bar is slipping on belt on my Dyson DC17 animal


Beater bar was turning intermittently. No noise. Removed bar, disassembled ends and removed lots of junk. Replaced, and works like new, so far. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

The beater bar on my dc33 animal dyson won't turn, the belt is in perfect condition and there are no blockages or obstacles that will stop it from turning


... Dyson Vacuums

Beater bar does not spin at all. I have a Dyson 28 Animal


... Dyson DC28 Animal Bagless Upright Vacuum

I cannot seem to replace the beater bar on my Dyson - it seems to spin OK, but when I turn the vacuum back on and turn it to the 'Carpet" position, it makes a noise that is unbelievable. What's up with that? The belt is intact.


Sounds like its the clutch to me if it sounds like a rapid clicking and you have a large knob on the side of the cleaner head it is going to be the clutch this is a hard part to changed without the know how to do it and it is very easy to break the o ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

Need to put on a new beater bar belt on my dyson 17 animal


Http://www.youtube.com/watch?v=Z1nSYmrLLsE ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dyson vacuum beater bar will not spin, belt is fine


Hi, Thanks for using FixYa! My name is Don/\015\012\015\012I will try and help you solve your problem with your Dyson.\015\012\015\012If your brushbar wont turn and the belt is definatley fitted correctly then there is a pr ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Beater bar not spinning - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


That means that the belt has stretched or broken and it needs to be replaced. Here is a link the belt you need and the manual which has instructions:Dys ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Beater Bar The "Beater Bar" or roller with brushes on it, is not spinning, therefore not picking up. I cannot locate my manual and need to know if it is belt driven and how to get at the belt to identify the size and purchase and install a new belt. Thank you for any assistance. [email protected]


Take off the bottom plate, then you can get to the brush roll and belt, on the model number plate, the number of the belt is on that, it is also on the belt if you can still make it out. ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

My older Dyson DC14 (the purple one) early model with a clutch on the beater bar belt needs a clutch replacement. The bar has been cleaned and there are no worn or damaged parts so I conclude that the clutch at the motor end of the belt needs to be replaced. I can find the part online but no instructions on how to disassemble the vacuum to get to and replace it. Dysons only advice is to give me the address and phone of the nearest service center. Can you help me?


Have a look at www.dysonmedic.com which has some very useful info on dismantling and repairing Dysons.\015\012\015\012Although this site doesnt actually cover the DC1 ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Caught a string in the beater bar. Cleared it out but now the beater bar will not spin. The belts are intact. I had this problem before and I can not find the answer online that fixed it. It is not the belt.


Hi there,Sorry to hear you're having a problem with your DC07. Please note that the brushbar will never rotate when the cleaner is standing in the upright position, or if you've used the brush control to turn it off. If you ha ... Dyson DC07 Bagless Upright Cyclonic Vacuum

My dyson animal is hard to push on carpet - the beater bar is still operational. When I turn off the beater bar and run the vacuum on hardwood the beater bar stops moving, but it still ''rolls'' on the hardwood - it doesn't pull up like it used to. It also seems to not be picking up as well as it used to, although no blockages are present and the filter is clean.


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

My Dyson DC17 beater bar motor works intermittedly. I have to almost whack it on the floor to turn it on and then shuts off again. I have checked the belt and it is fine, also have checked for blockages. The switch to turn the beater bar on or off will not work when the beater bar motor is off. the suction is fine though.


Buy a Kenmore for less money ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

The beater bar on my Dyson won't turn. The vacuum runs and suctions but the bar won't turn and the belt is not broke. The beater bar did get a carpet fiber caught and wrapped around it which stopped the bar and I removed the bar to cut the fiber loose and replaced it and now it won't turn


The belt doesn't have to be broken to make the vacuum not work correctly. If the belt is stretched the vacuum won't operate the way it is supposed to. You can get replacement Dyson Belts here: ... Vacuums

Our dyson beater bar won't spin.


You can also find more up-to-date info on www.dysonforums.com www.dysonmedic.co.uk and ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

I was vacuuming with my DC28 Animal and all fo a sudden the beater bar stopped working and NONE of the floor mode buttons work.. no lights or anyhting. I checked for obstructions per the Dyson manua


... Dyson DC28 Animal Bagless Upright Vacuum

Dyson Animal dc07 -- change belt


Read the manual -- available on the Dyson web site. Brushbar not spinning • Ensure brush control is set on carpets mode. Note: brushbar will only spin when the handle is reclined. ... Vacuums

Removing cover over beater bar for cleaning on dyson animal vacuum. Accidentally ran over mess on carpet and need to clean inside of cover and beater bar. Thanks


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0847 seconds