Having problems with your Dyson DC07 Animal Bagless Upright Cyclonic Vacuum ?

Dyson dc07 vacuum,turns off while vacuuming,will restart after cooling off,need help,,,,thanks


Answers :

Hi,
\015\012
\015\012It sounds as if you need to clean out the filters, look in your manual with regards to cleaning/replacement.
\015\012
\015\012Regards
\015\012Alan Hood
\015\012ami-man
\015\012UK
Repair Help & Product Troubleshooting for Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dyson dc07 vacuum,turns off while vacuuming,will restart after cooling off,need help,,,,thanks


Hi,\015\012\015\012It sounds as if you need to clean out the filters, look in your manual with regards to cleaning/replacement.\015\012\015\012Regards\015\012Alan Hood\015\012ami-man\015\012UK ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

DC07 Shuts Off, won't restart


If it was running for a while... It may be overheating. It has a reset: http://www.ehow.com/how_5943288_reset-dyson-vacuum.htmlBut maybe j ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Nutone central vacuum shuts off after a few minutes running then will restart after motor cools down I cheked motor and vent ports blown out all clean


Sounds like you have an overtemp switch that is tripping and shutting your motor off. Many motors use what they call a 'snap switch" ( looks like a small disk with two wires on it ) to sense motor temp and if that trips, then it will temporarily disa ... Vacuums

DC07 cuts out and stops after about 1 minute's use. It will restart after being left for c. 5 minutes. It seems, therefore that it must be overheating, but an independent electrician could not find any problem.


... Dyson Vacuums

Vacuum shuts down after a short time and needs to cool off before being restarted.


Trash it! ... Dirt Devil Reaction Twin Cyclone Upright Vacuum

Hoover cuts out after 5 minutes and will not restart until its cooled down.


OK - so it cuts out because it's overheating. The cause of this is almost always a blockage. You don't say what model of vacuum this is, so I can't guide you where to look. If you've got flexible hoses, check them. Also check all filters and any othe ... Vacuums

My Fuller Brush FB90T Bagged Upright Vacuum shutdown during vacuuming. I allowed it to cool off for a 24 hours but it will now no longer restart. Is there a reset function?


Check if there is debri at the bottom behind the roller where the dust gets sucked in. There is a reset button in this area. Press it with a needle or pen tip. Hold it for about 5 seconds.There is a overburn protection if their is obstruction ... Fuller Brush FB90T Bagged Upright Vacuum

Will be using my dc07 for about 10 mins then it cuts out i leave it to cool then it goes for about 5 mins and carries on like this


There is a thermal cutout on the motor causing this problem because it is overheating. Either it needs the filter replacing and a good blowout with compressed air or the thermal switch is faulty. Try replacing the filters first and if the problem p ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

Hoover S3639 Suction Failure/Turns itself off and restarts later


If the Motor is not providing enough power it could be an issue with the motor winding. I think you should take it to a repair shop ... Hoover S3639 WindTunnel Bagged Canister Vacuum

DC07 Bagless Upright Cyclonic Vacuum: can i use my dc07 on wet material?...


You should not use any vacuum that is not a wet/dry vac on wet surfaces including the Dyson DC07. It's not only an electrical shock hazard, but will do damage to your machine. ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dc07 problem I have a dc07 cyclonic vaccum and like this model,however, for some reason,it has been very dificult to push and pull for the past month or so. i have completely cleaned the brush assembly,cleared any obstructions in the hoses,and, cleaned the filter.I also checked the belt tension,wich i thought was fine but to no avail.Be advised that the brush assembly is spinning and suction is excellent. It just feels like the brush drags along the carpeting. this is a great vacuum cleaner and


The dyson uses two belts, one from the motor to a clutch and then from the clutch to the brush roller, the belts that they use are not much better then any other belt ( those you should change yearly ) but you cant just change the belts you have to c ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

When I plugged in my Riccar Vacuum cleaner - it made a pop sound. The breaker had not been moved - there was no smoke or apparent damage. I tried to depress the restart button and nothing happens. Is there a technique about pushing the restart button. Please advise.


Check the cord where it goes into the machine on back. most likely blew out at machine ... Riccar 8955 Upright Vacuum

Dyson dc07 cuts out after a few minutes ? - Dyson DC07 Bagless Upright Cyclonic Vacuum


There is a cut-out device on the motor which senses when too much current is being drawn, which in your case sounds like it is tripping because the motor is developing a fault and will likely fail completely soon.\015\012\015\012New motor ... Dyson DC07 Bagless Upright Cyclonic Vacuum

I am trying to find a Manual for my dyson dc07 to find some replacement parts. I have the original dc07. but having pulling up a manual


You can view the manual here:Dyson DC07 Manual ... Dyson DC07 Bagless Upright Cyclonic Vacuum

How to empty dyson dc07 - Dyson DC07 Bagless Upright Cyclonic Vacuum


... Dyson DC07 Bagless Upright Cyclonic Vacuum

Why does my dyson dc07 screech loudly - Dyson DC07 Bagless Upright Cyclonic Vacuum


... Dyson DC07 Bagless Upright Cyclonic Vacuum

My dyson dc07 brush is not spinning - Dyson DC07 Bagless Upright Cyclonic Vacuum


... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson DC07 My Dyson DC07 vacuum sounds very very loud, it works fine but it's gone from a quiet vacuum to a loud vacuum cleaner, what can I do to make it quiet again?


Your better bar is miss alined put a felt tab (for chair legs thier sticky) on the side if the bar near the belt on the inside end re put in the better bar no more noise ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

DC07 Motor DC07 does not run


Hi.\015\012\015\012Try this site http://dysonmanuals.llc.nu/index.htm it has dyson service manuals which are very easy for diy repairer ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson DC07 hi My dyson dc07 wont power up, any thoughts on what could be causing the fault. ie does it need new motor.


First, check your outlet for power...plug something else in. Then, inspect the cord and check the power switch. You can use a multimeter to test across the power plug of the vacuum in the ohms position. Turn the switch off and on. If it does not ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson DC07 My DC07 cuts out after 5 mins and I want to replace the thermal cutout. I have cleaned it thoroughly, including the cyclones but it still cuts out. How does the plastic moulding around the motor dismantle? I have started by removing the 4 torx screws but the upper grey housing does not want to detach and I am worried about breaking the plastic. Appreciate any advice.


Try this page: -http://www.fixya.com/support/t192124-overheating_dyson_dc07Regards Gualo ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Restart button Where is located that restart (or reset) button that fixed the problem? thanks a lot.


Usually there is a red reset button to push on top of the power head, but some are on the back edge of the powerhead. ... Kenmore 23612 Progressive PowerMate Bagged Canister Vacuum

Dyson DC07 My DC07 has been working fine, but now does not pick up. If you put hand over the tube end the suction is fine. Any ideas. Thanks


This is an incomplete solution. Mine (DC 14 Animal) worked great and\015\012then it didn"t and then it did after checking to make sure that all the\015\012parts were on securely. I noticed that while the suction sort of seemed\015\012normal, it was n ... Vacuums

Dyson DC07 i have the dyson dc07 and i want to clean the filter but i have lost the instructions. does anyone know how to clean the filter or where i can get a copy of the user manual??


Http://www.analogstereo.com/dyson_vacuum_owners_manual.htm ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson DC07 I have just got my DC07 serviced but cannot get it to stand upright - have lost my manual. Your help is much appreciated.


Hi.If you look at the front left side of machine there is a removeable inspection port it will have 2 coloured buttons you press these in & pull it up to remove.Now pull handle back as if vacuuming the floor. Now where the ... Dyson DC07 Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0220 seconds