Having problems with your Dyson DC07 Animal Bagless Upright Cyclonic Vacuum ?

The roller wont spin when I lower the handle

\015 Something large was sucked (I know, dysons don't ****, but what word do I use) into the roller. I stopped the machine as soon as I could and removed the item. Since then the roller won't engage\015

Answers :

Hi its Darran at Dyson.

It is possible that the item has caused some damage to the clutch. We would advise following the onilne checks at www.dyson.com and clikcing on the support section.

If this doesnt resolve the issue, please call our Helpline on 0800 298 0298 (UK) or 1866MYDYSON (US).

Kind regards
Dyson Customer Service
Repair Help & Product Troubleshooting for Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The roller wont spin when I lower the handle

Hi its Darran at Dyson.It is possible that the item has caused some damage to the clutch. We would advise following the onilne checks at www.dyson.com and clikcing on the support section.If this doesnt resolve the issue, plea ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My Eureka Maxima isn't working right. The belt is spinning fine until I lower the handle to start to vacuum and then the belt stops spinning. As soon as I put the handle back in the upright position the belt spins again.

Sounds like belt is worn try changing belt. ... Eureka 4700A Maxima Bagless Upright Vacuum

My eureka 5902 4D bagless uprights roller brush stopped spinning. The belt is ok. This model has a sliding switch for roller speed. The brush should spin when you release the handle via the foot release. Bad brush motor or is there a fuse involved?

The same thing happened to me about a year ago with this very model. \015\012The issue on mine was a small, copper-colored metal wheel that attaches to the end of the brush roller. You'll need to remove the top cover (there are several screws). ... Eureka Smartvac 4870 Bagged Upright Vacuum

Hoover U6637-960 the self propel is not not working. When lowering the handle it acts like it would like to work but the roller will not turn. appears to be something to do with the self propel part of the handle . took the screws aout but can not get it apart. Is there another belt of something in there?

This vac has 2 belts. If both self propel and roller not spinning then most likely it is the wide flat belt broken or off. 4 screws on the bottom should gain you access to the belt area. another issue for this model series is a worn pulley on the rol ... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

My beater bar will not spin when the handle is lowered? But there's suction thru the hose when the handles upright

I had the same problem. I read, earlier today, that one of the "problem solvers" called Dyson. Dyson suggested, with the Dyson upright and plugged in, on a carpet, toggle the "bare floor" / "carpet" knob from bare floor to carpet 5 times, then lay ... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

Roller wont spin

Is there hair, strings, twine wrapped around the roller? perhaps this is the issue, is there still suction by the rollers or has this stopped as well? ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Bissell powersteamer clearview model 8806-roller brush wont spin

... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Roller bar not working when lower handle

... Hoover U5720-900 WindTunnel Upright Vacuum

Roller wont spin

The bearings in your brush roll are bad. Replace the roller and walla problem solved! ... Bissell CleanView II Plus Upright Bagless VacuumVacuum

We have a new hoover bagless that is a couple months old. The pet hair attachment stopped working. I disassembled it found lots of hair wound around the various rollers and removed - painstakingly thorough i might add. Problem is the brush still wont spin and now the belt seems loose - I think I put it all back together correctly but wondering if there is a trick to this?

Without the model number, I can't look it up, but this has a 1 years warranty on it, maybe take it to a warranty shop. Just take proof of purchase, model and serial numbers. ... Vacuums

My roller bar wont spin the belt is on though

Even though the belt is on and intact it still can be stretched and worn. If that is the case it won't be able to turn against the resistance of the carpet. Your particular model has (2) belts, a clutch belt and a drive belt. Both should be replaced ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

Scrub roller wont spin - Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Pull the bottom cover off and replace the drive belt for the brush drum, if the belt is ok then replace the drive motor for the brushes. ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

The model is U5720950, there is no suction at all when I lower the handle to vacuum. But when I use the parts, they work properly. I cleared the roller and put everything back in place. Did I misplace something? Can I fix it myself without taking it to service?

... Hoover U5720-900 WindTunnel Upright Vacuum

Its like the roller brush won't lower and it doesn't "engage" anymore. I posted this but input the wrong vacuum model ....not sure if that matters? I can vacuum and you still see footprints on the carpet. I have suction, just no brush action, yet the brush spins....

Sorry about that, I guess I have to post this as a solution in order for the pictures to display. Here's the entire solution on a similar problem that I've answered previously. Please let me know if you need help further diagnosing the machine, I ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Hoover windtunnel Not sure of model number- but brush roller clamps down on carpet being vacuumed and stops spinning regardless of which of the 3 height selections is selected. Can make it work by leveraging the handle down (or back towards me) to keep the cleaning head a little off of the carpet-any suggestions or ideas?

Would suggest the drive belt is stretched and thus is slipping when contact is made with the carpet. ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

No suction I have new belts. Everything is clean. No clogs. When I turn it on it smells like rubber , the brush doesnt spin. Everything seems to be free flowing.. Roller brush isnt stuck on the ends. Took off hose to make sure no clogs anywhere. There is not even suction thru the hose with the handle in upright position.

Generally, the problem is that the belt is not running the brushes.  This is caused by one of the following:\015\012\015\012\015\012beater brush is jammed.  This is either an object stuck in the brush or im ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

Powered rollers wont spin. - Shark Helmet NV22L Shark Navigator Upright Bagless Vacuum

1) test the belt for worn or broken2) power rollers bearing defective test and repair3) motor need repair.4) test the thermal fuse5) test the main switch for open or defectie.se the diagram ... Shark Helmet NV22L Shark Navigator Upright Bagless Vacuum

The roller wont work inless i roll it back or put the handle up

... Bissell 3593-2 Power Trak Bagless Upright Vacuum

Roller motor on a DC17 dyson wont turn on

There is a reset button under the cover that houses the on/off switches. remove the handle/wand and look on the back (where the top of the hose sits) for 2 screws (its a torx/star head screw size t10 i believe). remove them and locate 4 small locki ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

I have a Kenmore Vacuum Cleaner, Model No. 11635923502. The agitator stops spinning when the handle is raised from its lowest position to about a third of the way up.

... Vacuums

Eureka Model C2094-Type GW Vacuum 1 Bags-Belt- Beater Roller or bristles that go on roller-light bulb Vacuum 2 Bags-Belt-Beater Roller-Bulb-Plastic frame the motor bolts on-Metal holder the handle go in that lets the handle move up and down

... Eureka Vacuums

I have just purchased two (2) Electrolux Nimble vacuum cleaners. Not one, but both, straight out of the box, the beater bars will not run. It turns on, select carpet, and lower the handle, the red light to check beater bar/or filter lights up. You can reset the light by unplugging the unit, then plugging it back in, but with same results. Now the kicker, if you take out the handle, select carpet, lower the body by the carry handle, it will run and operate correctly, however, as soon as you r

... Vacuums

Shark navigator power head will not turn on unless main handle is lowered to the floor

... Dyson Vacuums

Roller will not engage unless handle is in locked upright positition

... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Kenmore progressive direct drive roller wont turn

... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0442 seconds