Having problems with your Dyson DC07 Animal Bagless Upright Cyclonic Vacuum ?

The beater bar will not turn - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Answers :

Hello rebh. Generally when the vacuum beater bar will not turn it is because the belt that turns this beater bar has broken.
\012
\012That said, most of the dyson's require you to buy a beater bar assembly which includes the belt. Any vacuum cleaner repair shop will have this part. OR go to this link http://www.searspartsdirect.com/partsdirect/brands-products/Dyson-Inc-Parts/Vacuum-Parts
\012
\012Joe
\012
\012Thanks for choosing Fixya!
Repair Help & Product Troubleshooting for Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The beater bar will not turn - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hello rebh. Generally when the vacuum beater bar will not turn it is because the belt that turns this beater bar has broken. \012\012That said, most of the dyson's require you to buy a beater bar assembly which includes the belt. Any ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Beater bar will not turn - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson Animal handheld brush not turning - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi its Darran at Dyson.We would recommend checking it for a blockage and a removing any hair or fibres from the brush bar. As the brush bar relies on the suction power of your machine, it would be worth cleaning the filter and ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson animal beater bar not working - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Is the belt ok that drives it , is the clutch ok this video will give you instructions how to fix ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Better bar isnt turning on the animal - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


I would say that the belt is broken or the switch was hit and the contacts got misaligned (wife is a little rough on things). If you hit the switch on top with the vac in the use position, do you here the motor turn on? If you are not Mechanically ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

DYSON POWER SWITCH TURNS OFF - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson dc25 beater bar wont turn - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dyson Dc 24brush bar will not turn - Dyson DC07 Bagless Upright Cyclonic Vacuum


This video may help you ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson blueprint beater bar won't turn - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


The Dyson DC 17 has a rug / floor switch on the head of the vacuum. Please check to make sure the switch is in the Rug position. If the brush roller still does not turn then you have broken the belt and need the following part.\015\012 ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

DC07 brush does not turn - belt intact - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi there, The problem is likely to be \012a) The selector on the front of your machine is set to hard floors\012b) The ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

The beater bar won't turn - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


Replace the belt - it is broken or has a flat spot on it. ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

Beater bar not spinning - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


That means that the belt has stretched or broken and it needs to be replaced. Here is a link the belt you need and the manual which has instructions:Dys ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

How do I change brush bar on dc27 - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi there,Thank you for your inquiry. We recommend the DC27 brush bar only be replaced by an authorized service facility. Please call us at 0800 298 0298 so we can provide further assistance. Best wishes,Jessica ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Brushes not turning - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Is the motor operating when switched to "on " position? Is so I would have to assume that the belt is broken to the power brush /head. Did you happen to smell burning rubber at all when the brushes stopped working? Look in your manual for replaci ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Brushes do not turn - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


HI there, \012There are a couple of reasons that your brushes may not spin. \0121. The hard floor / carpet dial is set to hard floor. \0122. The clutch to motor belt is broken\0123. The clutch to brush belt is broken.\01 ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

The machine turns off after 2 minutes - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Over heating is the usual reason for shutoff there is a temparature sensor that interupts the power on overheating the usual reson is clogged filters or blocked pipes. theer are two filters on this model the second one is located under the waste cont ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Brush not turning - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


That is usually caused by a worn, stretched or broken drive belt. Here is a link to the replacement belts you need and to a manual that you can view which has instructions. It's really simple. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Beater bar won't work - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Belt not turning on carpet mode - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi, you say belt not turning on carpet does this mean the belt is turning if you tip the vac onto its back does the brushes then spin round as normal, if this is the case then this means that all you need toy do is get a replacement belt these can be ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Carpet bar doesn't turn - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


This is either a broken belt, or a faulty clutch.\015\012\015\012DC07s have two belts - one connects the output of the motor to the clutch, the other connects the clutch to the brush bar.Unfortuenately one of the belts is hidden und ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

Belt not turning, it is not broken - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


The shaft that makes the belt spin is most likely not spinning. Take it into a vacuum shop ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Seems the belt is not turning. what to do ? - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


\015\012Flip the unit over and turn it on. If you physically see it turning then the belt is fine. If it is not then you might have to have your clutch replaced ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Beater bar doesn't move - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi,\012There are two things that can go worng tthat will stop the beater bar...\012The belt broke...or..\012the motor went bad...\012\012heatman101 ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Got hot and turned off - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Getting too hot is a sign that the air flow is restricted ... that could be a clogged filter, hose or air intake ... there is a thermal breaker in the moter that will shut the machine off if it gets too hot .. it will automatically reset in 5-10 minu ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

The brush not turning - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Belt could be worn, brushroll bearings could have gone. Even the clutch could be broken.Is the brushroll jammed? ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1774 seconds