Having problems with your Dyson DC07 Animal Bagless Upright Cyclonic Vacuum ?
Hi. We've got a Dyson DC17 "Animal".
It's clogged, and we are unable to separate the purple cyclone cap from the main cyclone body to get to the problem.
We've heard of 4 torx screws that take some interesting tactics to access.
I've been through this thing with a flashlight, and torx tools for a protracted period, and even after removing the torx screws was unable to ultimately separate the two pieces (main body from purple cap assembly).
Any help would be greatly appreciated.
Repair Help & Product Troubleshooting for Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Hi. We've got a Dyson DC17 "Animal". It's clogged, and we are unable to separate the purple cyclone cap from the main cyclone body to get to the problem. We've heard of 4 torx screws that take some interesting tactics to access. I've been through this thing with a flashlight, and torx tools for a protracted period, and even after removing the torx screws was unable to ultimately separate the two pieces (main body from purple cap assembly). Any help would be greatly appreciated. Thanx -
... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
GE 106766 When turned on, rubber burn smell from the main body. Can't locate screws etc to open and inspect the main unit. Very little suction. Motor functions.
... GE 106766 Bagged Canister Vacuum
How do I take apart the body of dirt devil 82500? I think something shorted out, and want to see if I can fix it. I took all visible screws out of body, but still can't separate the two halves to get to the motor
This is sort of easy, and hard at the same time. \012\012First remove the dirt canister and hose. \012take out your exhaust filter. \012find all of your screws on the one side of the unit and remove them. \012you will fi ... Dirt Devil MO82500 Bagless Canister Vacuum
Lost most all suction; pinpointed to cyclone mechanism (as input suction is perfect), but cannot figure out how to disassemble. Removed 3 torx screws from top and inner unit. Thanks!
Hi there Creddiscks, \012There isn't much more to it once you have those screws out. The rest of the chamber is not designed to be pulled apart unfortunately. I have made a video titled \012 ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
Dyson DC07 My DC07 cuts out after 5 mins and I want to replace the thermal cutout. I have cleaned it thoroughly, including the cyclones but it still cuts out. How does the plastic moulding around the motor dismantle? I have started by removing the 4 torx screws but the upper grey housing does not want to detach and I am worried about breaking the plastic. Appreciate any advice.
Try this page: -http://www.fixya.com/support/t192124-overheating_dyson_dc07Regards Gualo ... Dyson DC07 Bagless Upright Cyclonic Vacuum
I have a yellowMiele Vacuum,model=Electronic Air Clean Plus S3121. On the main body the part that the pipe/nozzle clicks into has a piece that has snapped off. I can see this by lifting the lid and the black plastic piece that is screwed to the inside of the lid has a piece chipped of it which means that when the nozzle is clicked into place it is completely loose. There is a black piece that clicks into the inside of the hoover into this broken part which is still ok so at the moment by linin
Generic problem for all Vacuums\015\012I have a yellowMiele Vacuum,model=Electronic\015\012posted by maura497 on Apr 18, 2008\015\012Report abuse\015\012 ... Vacuums
I need to change out the short hose on the underside of my older Dyson DC 07 Animal (Light Purple). It is the one less than a foot long on the underside which is attached on one end to the main body of the vacuum(I was able to remove this one) and the top of the upper soleplate. The latter one seems to be glued or otherwise permanently attached.Any assistance you could give me on this would be greatly appreciated....Thanks
Hello Cynthia,\015\012\015\012It's not glued, but it can be a little difficult to remove. You need to twist and pull at the same time and it should pull off. If it's being stubborn, squirt a little bit of WD40 / penetrating fluid where th ... Vacuums
Replace main body on Hoover U8144-900 - Hoover U8147-900 WindTunnel V2 Bagless Upright Cyclonic Vacuum
... Hoover U8147-900 WindTunnel V2 Bagless Upright Cyclonic Vacuum
I am trying to get to the belt on my fantom cyclone xt, although I am unable to see any screws to remove. I took the rubber bumper off thinking this would be of some help although nothing there either. Can you help???????
Remove the lens covers, bulbs and the foil. under the foil are two screws. remove the screws and the cover lifts off. the motor for the belt is held in with one screw. ... Fantom Vacums Cyclone XT Upright Vacuum
The cyclone is loose on the main body when i grab the handle it just comes off
Hi Alan, I'm sorry to hear about that. In order to determine why the cyclone is not fitting securely on your DC07, we'd need to run through some troubleshooting checks over the phone with you when you have the machine to hand.You can ... Dyson DC07 Bagless Upright Cyclonic Vacuum
It a rechargeale. It will not charge. is there any way to dismantle it and replace the rechargeable batteries. ? There does not appearto be any screws to separate the two halves of the body. maybe teh
What model...lots of recalled vacuums out there under recall for batteries. Can you solder ? The new batteries WILL have to be soldered. Can you get someone to read voltage of the piece you plug into the wall ? ... Vacuums
Getting inside the cyclone canister of the new Dyson DC 33
Polti Vaporetto 1500 Unable to unscrew polti safety cap. ( nothing to do with steam as machine not turned on yet)
... Polti Vaporetto 2400 Canister Steam Vacuum
Polti Vaporetto 1500 safety cap won't screw off.
... Polti Vacuums
I have a electrolux model el-8620.How do you get the main body apart?
... Electrolux EL8602A Bagless Upright Vacuum
Base Plate screw rotating in insert and not coming out. Insert come unfixed with screw still attached. Therefore unable to remove baseplate, unable to remove cotton fibres from brushes. Have you an engineer in the vacinity of york(NOT A SALESMAN WITH A FRANCHISE) PLEASE
Try to remove all other base plate screws first. If they can be removed gently try to pull open by hand against the lid while rotating the remaining screw. You will need to apply outward pressure betweent the insert and baseplate to remove it while r ... Vacuums
How to dismantle a Miele S 5980 vacuum cleaner. The RESET switch has fallen in and I can't remove the plastic panel to replace it. Neither can I remove the cleaner body to get in from beneath. I have removed 2 screws from the front of the barrel (nozzle end), one screw centre front, two screws towards rear, but there seems to be something else holding the housing together. email@example.com
... Miele Vacuums
Miele S5000 (revolution 5000) vacuum cleaner - How do I open the casing? When the power button on the handle is pressed the green power-level lights on the handle light, but the motor sounds like it gives a little 'jump' but nothing more. The orange power light on the body also dims. I assume the motor or fan is jammed, but I can't open the body to find out. I've taken out to screws inside near either end of the handle, but to no apparent effect. I'm assuming the body is held together by plastic
I have a Dyson DC-17 and the top of the cyclone has hair and other debris jammed in the ports. It has 6 six screws holding the parts together and I can only get access to 4 of the screws. The bottom piece appears to be removable, but I can't figure out how to remove it without damaging it. If I can get this piece off, then I have access to the other 2 screws. Can you tell me how to remove the bottom piece? Thanks in advance.
The instructions on how to dis-assemble your DC-17 are somewhat lengthy and it is quite helpful to have pictures and videos handy while you are doing it. Normally I would give the instructions here, but due to the amount of info that is necessary to ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum
How to open main case on a dc08. i have removed the two screws under the top filter but i can not figure out how to seperate the main case so i can replace main switch. any help would be much appreciated
... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum
How to Remove Hoover Windtunnel Main Body
... Hoover S3639 WindTunnel Bagged Canister Vacuum
Replacing Main Body on Hoover Windtunnel Self Propelled
... Hoover Vacuums
Eureka The Boss Power PLus Model # 4703 Type A Ser #: 0728007324 Adapter that goes between the hose and the vacuum body is held on two tabs (screws). The screw tabs have broken off. Where can one obtain a replacement adapter?
... Eureka Power Plus 4703D Bagless Upright Vacuum
Purchased ProHeat 7920 Po-Tech recon. Unable to use main brush as no water/cleanfluid. Belt drive is ok. Grateful advise location of fluid jets as not visable behind main brush. Turbo brush works well.
Make sure there is liquid in both the Tank-in-Tank and the SmartMix Bottle and check for spray through the upholstery hose. If the hose does not spray please check the following:\015\012 \015\012- Remove the belt access door and ... Vacuums
My son vacuumed up water. I am trying to open up the cannister & dry out, but am unable to get at all the screws. Is there a manual available that would show how to get at all the screw locations?
You will need a flat screwdriver and a little patience to get to the screws. \012\012you will want to remove both the switch cover and the cord retract cover to get to the screws. once you have done that, you can get into the motor chambe ... Eureka 6833D SurfaceMax Canister Vacuum Cleaner with 12 Amp Power Allergen