Having problems with your Dyson DC07 Animal Bagless Upright Cyclonic Vacuum ?

My dyson animal base seems to be out of line. I cant make it click upright


Answers :

Repair Help & Product Troubleshooting for Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My dyson animal base seems to be out of line. I cant make it click upright


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My Dyson DC17 Animal Bagless Upright does not click to stay in an upright position. It works but the handle falls to the floor.


This is a common fault with the Dyson DC07 (and other Dysons) unfortunately the clip that holds the handle upright hs broken. It can be repaired, but will cost a reasonable amount to have done... I would just live with the problem and prop the vacuum ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My Dyson makes a loud noise when I vacuum - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


You need to replace the belt. Here is the belt you need and a manual you can view which has instructions:Dyson DC17 Belt and Manual ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Cant lower handle on my dyson dc07 - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Hi, I have a Dyson DC04, (silver/lime) making ear popping screams! Does not happen all the time, and more noticeable when it is pulled back.The suctions not a problem and no funny smells or strange noises from the motor. Ive taken the base plate off and the belt and brush bar seem fine, but when I turn the belt, it seems to be the motor spindle thats squeaking, almost as if it need oiling, any help please


... Vacuums

My dyson is making a loud scweeky noise - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


Www.sewvac.com Remove the bottom plate and disconnect the belt.If it still makes the noise it is the lower motor that drives the brush that is bad.If it dosent make the noise try cle ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

I cant remove my wand on my Dyson vacuum. - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


Hi its Darran at Dyson. It is possible that if the hose is blocked that the wand handle may become jammed. For help releasing this, please contact our Helpline on 0800 298 0298 (UK) or 1866MYDYSON (US) and one of our advisors can talk yo ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

My Dyson in making a really awful noise. - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


You may want to open up the bottom where the floor brush is and check the condition of the belt and as to whether or not something is caught in the belt or beater brush. The owner's manual should provide directions on changing the belt. While y ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My Dyson DC17 Animal brush roller makes noise when it is spinning but not when using the wand. The belt around the roller seems fine and it is not plugged. What else can I check for?


Need replaced belt and Brushbar Assy\015\012Brushbar Assy part no:911961-01\015\012Belt part no: 911710-01 ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dyson DC14 Animal: Loses suction when in the upright postion and I am using the wand. I have cleaned the top spongy filter. It sort of 'blows' out of the top of the cylinder if that makes sens


Hi Sharon,I'm sorry to hear you're having difficulties with your DC14. If the machine doesn't seem to be picking up as well as usual through the wand, this may be due to a blockage in the wand, hose or U-bend. The easiest way to check for thi ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

My dyson DC41 animal upright vacuum clicks but doesn't stand up


If you are indicating that it works, but will not stay in an upright position, then the problem is likely a plastic part has broken.\012Since the machine is nearly all plastic, it will break rather easily, and may not be repairable.\012 You m ... Dyson Bagless Upright Vacuum DC41 Animal

I have a dyson animal dc17 vacuum and it totally died. Now I can't figure out which wires go where when I install my new motor. (motor #: 160906G) Do you happen to know where the various color wires go or a place I can see a diagram of the motor with wires attached? I should have taken a photo of it before tearing out the old motor. I don't know where to connect the three coming out from the upright portion of the machine and the red seems to go to a switch (?) and there is a black (connected t


... Vacuums

My Dyson DC27 Animal is stuck (Locked) in the upright position. Everything seems to be ok with no apparent cracks or breakages. I don't want to force it in case something snaps.


Dysons are notorious for this problem. You will have to just force it and clean any obstructions. ... Vacuums

Hose tear at base of hose - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


You can get a new hose from the link below and all other spareshttp://www.sparesaver.com/vacuum-spares/dyson-hose-1725/dc14-hose-dar ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

WHAT MATERIALS WERE USED TO MAKE THE DYSON DC07-ANIMAL BAGLESS UPRIGHT VACUUM


Go to www.dyson.com to contact the Dyson in your country. I'm sure they'll have a good idea of what materials were used. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

I have the Dyson animal upright vacuum. It's 2 years old and now it just isn't working as well as it once did. Suction seems to be lacking - it's not picking up pet hair or much else from the carpet. I have to go over the spot for a few minutes and still, the hair isn't picked up.


You might want to check and see if your cyclones are plugged with hair. this can happen and there is a great site to disassemble and clean the cyclone here: http://www.exonotes.com/content/node/4 ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Seems the belt is not turning. what to do ? - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


\015\012Flip the unit over and turn it on. If you physically see it turning then the belt is fine. If it is not then you might have to have your clutch replaced ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Vaccuum brush making a rattling noise - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Cant replace belt on dysonDC07 - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


It is difficult to replace the belt yourself and you need a special tool to access and remove the clutch (the belt sits around the clutch and the brushbar). The best solution is to call the Dyson Helpline, they will refer you to an authorized repair ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Switch has power but wont click and stay on - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


My vacuum had this exact same problem, but was out of warranty because \015\012it was remanufactured. Thankfully, it's a very quick, five-minute fix.\015\012\015\012UNPLUG The Vacuum!\015\012Remo ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Trying to registir my bissell vacumn on-line - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


Call them you idiot.. there is a tag on the machine gives you model serial and customer service.. ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

My Dyson DC17 Animal brush roller makes noise when it is spinning but not when using the wand. The belt around the roller seems fine and it is not plugged. What else can I check for?


Hi its Darran at Dyson. You may find it useful to remove the soleplate from the base of the machine and make sure that the brush bar is fitted correctly. Once this is done, make sure there are no hairs or threads wrapped aroun ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

My Dyson animal seems to have an electrical issue that I am unable to pinpoint. Neither the wand nor the floor vac have any suction AT ALL. In fact the vac makes absolutely no sound and you wouldn't even know that it had power to it unless the rollers are turned on, the rollers work just fine. I had this problem start about a month ago and then it just started working again after messing with it for a while, now it has happened again and I am getting a little agitated! Please Help!!!!!!!!!!!


There is a filter inside the canister, and by your description it sounds like it needs to be cleaned. if you remove the filter and blow it out using a air compressor or using a slightly ridged brush and tapping the filter out this should solve your ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dyson animal will not stand upright - Dyson DC25 Animal Bagless Upright Vacuum


Hi there,I'm sorry to hear you're having difficulty standing your DC25 Animal upright. It sounds as if the stabiliser needs realigning. This is simple to do - please follow the steps shown in the video below.If you'd like any further ... Dyson DC25 Animal Bagless Upright Vacuum

DC14 DYSON ANIMAL BAGLESS UPRIGHT - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1799 seconds