Having problems with your Dyson DC07 Animal Bagless Upright Cyclonic Vacuum ?

Brush stopped working - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Answers :

Hi there,

I am sorry to hear your brush is not working properly. Please click on the appropriate link below for detailed trouble shooting instructions.

If you reside in the US:

http://www.dyson.com/support/help.asp?article=804&product=DC07-ANIMAL_US


If you reside in the UK:

http://www.dyson.co.uk/support/dc07/dc07-animal/my-machine-is-not-working/i-can-see-something-wrong-visual/i-can-see-something-wrong-visual/my-brushbar-is-not-rotating2/brushbar-not-turning-clutch-check


However, if this does not resolve the issue, please call us directly at 1-866-693-9766 (US) or 0800 298 0298 (UK) so we can provide further assistance.

Best wishes,

Jessica
Repair Help & Product Troubleshooting for Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Brush stopped working - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi there,I am sorry to hear your brush is not working properly. Please click on the appropriate link below for detailed trouble shooting instructions.If you reside in the US: ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson stopped working - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

The motor is working but brush not spinning - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


DC07s have two drive ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

The rotating brush is stopping - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Two things you can do. 1- Remove the brush as if you were going to change the drive belt for it. Clean the brush as best you can and spray some WD40 on the hard rubber/plastic pieces at both ends of the brush. Rotate the pieces to work the WD40 ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Beater brush will not work - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson Animal handheld brush not turning - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi its Darran at Dyson.We would recommend checking it for a blockage and a removing any hair or fibres from the brush bar. As the brush bar relies on the suction power of your machine, it would be worth cleaning the filter and ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson animal beater bar not working - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Is the belt ok that drives it , is the clutch ok this video will give you instructions how to fix ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My DC07 Animal Bagless Upright Cyclonic Vacuum has a small attachment for vacuuming carpeted stairs. This attachment is currently not spinning its internal brush necessary to pickup the dirt on the stairs. The rest of the vaccum is working fine. The suction cap on this attachment is pulled out, as it should be. I have checked the vacuum over thoroguhly and there are no bloackages anywhere.


Make sure to extend the wand straight up and completely out of the handle and watch that you don't kink the hose. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

How to change brush belt on dco7 dyson - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


This depends on whether your DC07 has a brush control clutch or not. For excellent illustrated guidance go to www.dysonmedic.com and click on DC07. For belt change on a model without clutch click on "belt and brushroll". It's simple! For models with ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

"CHANGING CARBON BRUSHES ON A DYSON VAC" - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


You dont need to replace with new motor,i just replace the brushes not had no problem yet.. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

It stopped sucking @ brush stopped turning - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


Usually on this vacuum those two problems are not related, but if you got a lot of stuff stuck in the brushroll and in the suction tube at the same time it could happen. Check the belt to make sure it's not broken. If the vacuum is over a year old th ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

DC07 brush does not turn - belt intact - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi there, The problem is likely to be \012a) The selector on the front of your machine is set to hard floors\012b) The ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

The release will not work on my dyson dc07 - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

The brush doesnt rotate - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Means you have return it ... ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Brushes do not turn - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


HI there, \012There are a couple of reasons that your brushes may not spin. \0121. The hard floor / carpet dial is set to hard floor. \0122. The clutch to motor belt is broken\0123. The clutch to brush belt is broken.\01 ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Suction is not working at 100% - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Try cleaning/replacing the filtersand checking for blockages in the hose.If you visit\015\012http://www.sparesaver.com/help-and-support/dyson-section/dyson-technical-advice-450/\015\012they have alot of info on repairing dyson cleaners AN ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Brush won't turn - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


\015\012\015\012Belt is broken. You will need to re[lace the clutch. Here is a video on how to do that. ht ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Brush not turning - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


That is usually caused by a worn, stretched or broken drive belt. Here is a link to the replacement belts you need and to a manual that you can view which has instructions. It's really simple. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Loud screech when engaging brush - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


You will need to have the clutch change or the brushroll replaced. to change the brushroll you will need a special belt tool. you can get one on ebey for about $15. you could call dyson and find one of the service centers in your area. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

The brushes on the bottom are not moving - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


The two easiest issues to look into are broken drive belts or frozen brushes.\015\012If the drive belt is broken, it will need to be replaced. If the brush is frozen it will have to be removed and cleaned. Might be a good idea to spray some WD wher ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Beater bar won't work - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My brush bar is not working - Dyson DC15 Animal Bagless Upright Cyclonic Vacuum


Make sure your clutch is turned on to drive - if ok, take sole plate off to see if the belt is in tact if not, needs new clutch ... Dyson DC15 Animal Bagless Upright Cyclonic Vacuum

The brush not turning - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Belt could be worn, brushroll bearings could have gone. Even the clutch could be broken.Is the brushroll jammed? ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Just stop working - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


So, please check(a) the fuse, if ok check (b) power cord ,if ok check (c) the switch,if you have a miltimeter, it will be very easy for you ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

Brushes not turning - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Is the motor operating when switched to "on " position? Is so I would have to assume that the belt is broken to the power brush /head. Did you happen to smell burning rubber at all when the brushes stopped working? Look in your manual for replaci ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1966 seconds