Having problems with your Dyson DC07 Animal Bagless Upright Cyclonic Vacuum ?

Suction loss on dyson animal

\015 Wrote previously about suction loss, with no apparent plugging of hose/tubing areas, was asked about noise that accompanied problem...\015\012there is no noise except regular motor noise, no grinding, squealing or chattering sounds. Just the sound of suction breaking, then motor sounds.\015\012\015\012Can I just go after it with an axe?\015

Answers :

Hi.
\015\012
\015\012Keep the axe on hold try this first.
\015\012

Ok first thing to do is remove & clean the 2 piece premotor filter or purchase new.

Now remove soleplate from bottom of machine to do this rotate the 3 plastic screws to unlock position. Lift sole plate off now remove any blockagers or fluff that may be built up over the brush roller.
Remove hair from brush roll using scissors.

Check short clear hose for blockages & any damage rips or tares if it is damaged purchase new hose.

Now look at belts & rotate brush roller it should turn relatively easy if it is difficult to turn by hand remove the brush roller & pull off the end caps the axle will come out with one of the caps.
Check the roller bearings clean away dust build up replace end caps & axle spin roller holding on to end cap if freely to spin refit back on to machine.

If its stiff to rotate you will need new roller.

Now pull off the 2 inspection ports check them for bits of paper etc especialy the (U) shaped port at bottom rear of machine this can contain pens pencills stones all sorts of items that hinder the suction.

Now check the long flexi hose & metal wand for any obstructions.

If after all this machine is still not working correctly go to this site http://dysonmanuals.llc.nu/

On this site you will find Dyson service manuals covering poor suction, clutch,motor, etc.

Chris...
Repair Help & Product Troubleshooting for Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Loss of suction on dyson animal hose - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


There may be an obstruction in the hose. Hold it up to the light then I use a long thin broom handle to push the clogged hair through it, being careful not to split the hose. This always does the trick for me. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My Dyson DC14 Animal doesn't have the suction it used to. The piece in the back on the bottom - a flap it appears - stays open now, causing the machine to make a louder noise than usual. At first, if I put my hand on the flap opening it would close, allowing for normal suction. Now, it stays "open" permanently", causing the loss of suction.


Hi its Darran at Dyson.Having had a look at a DC14 here, I am unsure as to the part you are referring to. So that we can help you further, please contact our Helpline free on 0800 298 0298, between the hours of 7am - 10pm, 7 days a week. ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Loss of suction Dyson Absolute dc17 - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


More than likely the sole plate on the botom of the cleaner is plugged, take the bottom plate off and clean it out, also make sure your brush is clean and not full of hair. This is common on this vacuum ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dyson dc41 suction loss - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Suction loss on dyson animal


Hi.\015\012\015\012Keep the axe on hold try this first.\015\012Ok first thing to do is remove & clean the 2 piece premotor filter or purchase new.Now remove soleplate from bottom of machine to do this rot ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson Animal-suction loss


Had the same problem twice and washed the filter to no avail. Called Dyson to troubleshoot, and in one minute they had me removing the purple plastic noodle shaped piece towards the bottom on the side (the next time it was the silver noodle on the op ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Loss of suction on dyson animal hose


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Loss of suction with hoss & wand with my Dyson Animal bagless - will only work as an upright.


It sounds like you have a clog through the hose. Take the entire hose off of the unit and stick a broomstick through, if it comes out the other end without anything coming with it. The clog is in the sweep below the unit. If your mechanically incline ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Loss of suction - Dyson DC28 Animal Bagless Upright Vacuum


... Dyson DC28 Animal Bagless Upright Vacuum

Cleaner not picking up loss of suction - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Loss of suction - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Did you check to make sure the rotating brush is working? Did you remove the removable channels to check for obstructions? Also, is the canister empty? ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson dc41 animal suction - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dyson animal We bought a Dyson Animal from Sears a few years ago along with a service contract. We took it each year to be serviced. One year I took it because it lost it's suction. They sent it to the factory, but it came back still not working right. We did the same procedure over ands over many times than I can remember. I now have the cleaner in my garage and am using my old vacuum because I just can't seem to get anywhere with Sears. Please help me. We paid almost $600.00 and now it can't b


As someone who works for Sears, let me just say right now.. The service contract you bought sucks.. and does not really do anything for you. it was just a wast of money ( they have a new one now.. thats so much better because you get your money back ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

No suction Just received my refurb. dyson animal bagless. Finally figured out how to get it all together, turned it on and there is no suction coming up thru the beater bar. The hair is just collecting around the bar and not going up into the canister. It appears all the suction is going thru the open red end of the attachment hose, which has a vented cover piece. Am I missing a piece or is there a switch to turn of the attachment suction?


So the red hose isn't connected to a part on the vaccum so like it is connected to the connester but not to an opening just above the beater bar, this is the only idea i can supply you with. good luck, maybe i got lucky and helped you out. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

No suction on wand of Dyson DC14 Animal


Hi its Darran at Dyson.It sounds as though the wand handle is blocked. To check this, remove the wand/hose from the machine as if you were going to use it to vacuum the stairs. Switch the machine on and test the suction at the top of the ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

My Dyson 14 Animal seems to not have the suction


Hi its Darran at Dyson. Firstly check that the brush bar control on the cleaner head is in the correct position. You may have switched the brush bar off the last time you used it or the dial may hav got knocked when you vacuumed under so ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

A Dyson dc 17 Animal and the wand/hose has lost suction


Hi its Darran at Dyson.From your description of the problem, it sounds as though the wand/hose is blocked. To check this, remove the wand/hose assembly from the machine, switch it on and test the suction from the top of the wand with you ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

No suction on dyson dc 17 animal


... Dyson DC28 Animal Bagless Upright Vacuum

Dyson dc07 animal no suction


Hello,There could be a few things that would cause your Dyson to have no suction. I will give \015\012you detailed step by step instructions along with pictures on how you can \015\012diagnose this.Possible Problem \015\012#1. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Suction only coming through the wand when its replaced its not switching back to the upright. I have a dyson DC28 animal


Hi there, it's Jack at Dyson.I'm sorry to hear your DC28 doesn't seem to be working correctly. It sounds as though the change-over valve may be jammed - this diverts the suction to the hose when you remove the wand, and back to the cleaner he ... Dyson DC28 Animal Bagless Upright Vacuum

Loss of suction on Dyson DC23


Hi there,We are very glad to hear you were able to resolve the issue with your DC23. Thank you for taking time to share your resolution. If you have any questions, or need assistance at any point in the future, please feel free to call our Dy ... Dyson DC23 Bagless Canister Cyclonic Vacuum

Dyson DC 14 upright not suctioning - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


Start by cleaning the filters. Watch this video: \015\012\015\012\015\012 ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

My dyson dc17 animal will pick up via the hose attachment but there is no suction when you use the regular vaccuum on the floor - you can hear the difference in the suction once you put the floor part down - we took it apart - cleaned it - checked all hoses - still does not work????


Hi its Darran at Dyson.Check that the brush control dial is in the centre position when upright and then moves forward when the head is released. If the brush bar is still not spinning when switched on in the vacuuming position, check th ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dyson vacuum suction loss - Dyson DC11 All Floors Bagless Canister Cyclonic Vacuum


Clean it outcheck all the filtersI think it has a foam filter as well as the filterless designclean and lubricate the motormake sure it is not leaking and sucking in air from somewhere else ... Dyson DC11 All Floors Bagless Canister Cyclonic Vacuum

Dyson DC17 Animal does not have enough suction from the wand handle to power the mini turbine head. The wand handle has very little suction.


My dyson doesn't have suction either and nothing is blocked. In fact is was working great the vac that is, but when I used the wand for the first time to get the corners the vac shut off, I checked the hoses, filters and all nothing is blocked. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0417 seconds