Having problems with your Dyson DC07 Animal Bagless Upright Cyclonic Vacuum ?

Won't stay on!!! HELP!

\015 I have had my Dyson for 6 months and went to use it today and when I push the button down it will not stay on. It goes on when the button is held down but willnot stay on when you let go. I am thinking it probably needs to be serviced but thought I would post this to see.\015

Answers :

It is the on/off switch that needs replacing. It can be done at home if you know someone who would attempt it. Overall, knowing that it is the switch, it should save money by not having them troubleshoot further. Tell them what I told you and it should be cheap. Good Luck.
Repair Help & Product Troubleshooting for Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My bissell brush band has come off and wont stay on thus the brush will not turn, there is also a black arm type thing on a spring inside (on both sides) on the pump belt side it has broken - the side where the brush belt is, help im searching for parts and a way to fix it but im getting no joy, incidentley the brush belt thickness looks way to thick for the small thickness for the brush belt cog (?) to stay on........am i missing something? so i need to get the arm thing replaced plus find a


... Bissell ProHeat Deep Cleaner Upright Vacuum

My dyson vaccumm wont stay on it works but i have


Is it a switch or a push button? ... Dyson DC07 Bagless Upright Cyclonic Vacuum

I have an eye vac professional that will not stay on to **** up the dirt. There is power to the outlet and the blue on/off light does stay on, but in Auto mode if I stick my hand near the dirt sensor it just pulses on and off. I can feel the suction, but it won't stay on. I've unplugged it, removed the dirt bin and filters and nothing works. Help!!!! This is brand new and I've only emptied the collection bin once and it hasn't worked since.


... Vacuums

Hi! I have a Pfaff Creative 1475. The presser foot seems "gummed up" or stuck. The back lever lifts it with great force, but then instead of staying up like the lever usually does - it then falls back down. The lifting foot stays stuck up and I have to push on it to get it back down. Help?


Bdfbjhfjffjfjfjfjfjfjfkfjfjffjfjfjjfjfjfjfjff ... Vacuums

Power button wont stay on. have to hold the power button manually for it to stay on.


Most likely you have to replace ON/OFF switch. look at detail instructions how to do it on our website:http://www.goodvac.com/kb_results.asp?ID=18 ... Kirby Ultimate G Bagged Upright Vacuum

I have a brand new LGV200R vacuum sweeper.. from the very beginning it never will stay turned on.. it is brand new.. I have checked every thing in the book that says to and then some.. why wont it stay ON


... LG Vacuums

Bag full light stays on so my electrolux diplomat lx vacuum wont start i push on/off swtch and light stays on


... Electrolux Lux 5500 Canister Vacuum

Wont spray i have a bissell pro steam 2x and it wont spray the water out, i have cleaned everything and nothing seems to be working ...please help


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

I AM LOOKING FOR DIRT BAGS ON THE HERITAGE II PLUS BELTS ON ABOVE MENTIONED. I AM STAYING IN SOUTH AFRICA AND I CAN NOT FOUND ANY AGENT THAT CAN HELP ME WITH THE ABOVE. PLEASE HELP


Http://www.kirby.com/Portals/S_Africa/homecareproducts.html go to this website and they can help you find bags. Just call the number for South A ... Kirby Heritage II Vacuum

My dyson animal vacuum (~9 years old) will not stay on. I press the on/off button and it will only stay on as long as I am holding the button down. Help please!


Hi it sounds like you need a new switch ... Vacuums

Pickup water wont pickup the water after putting it down very little comes up into the tank .it worked fine when we baught it but after not useing it for some time it worked now it wont **** water up at all can anybody help.


The clear shroud covering the front of "hood" has two sheet metal type screws at the bottom in front of the brushes, these two screws also hold the little straight brushes ( one on each side) in place. I found one of these screws had broken it's plas ... Hoover F6020-900 SteamVac Upright Vacuum

THE ROLLER ON MY SHARK NAVIGATOR WILL NOT STAY ON, I CLEANED ALL THE HAIR FROM THE ROLLER AND IT STILL WONT STAY ON. IS THERE A BELT I NEED TO CHECK


We have only had our Navigator for 6 months and the bar won't turn. We took the whole beater bar head apart and it was a wiring problem in the beater bar motor.What a piece of junk this is, very poorly made and has many design flaws.Look ... Euro-Pro NV22 Shark Navigator Bagless Upright Vacuum

Start button wont stay on. Is there a trick to


Have a look at:\015\012\015\012http://www.dysonmedic.com/DC07%20Folder/DC07%20Motor%20change.html\015\012\015\012 ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

DC 17 UPRIGHT BRUSH MOTOR WONT STAY RUNNING. TURN


Have a look at the filters first as it sounds like you blokeage ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Electrolux z4494 vacuum cleaner mains cable wont stay out


Opened up case as follows:\015\012- Open lid of bag chamber. Remove lid by gentry prising the hinge arms slightly further apart so the hing unclips from the body.\015\0122 deeply recessed screws now accessible at rear edge of bag chamber ... Electrolux Vacuums

Wont come on or stay on


Take a look at my troubleshooting guide....\015\012\015\012http://reviews.ebay.com/COMMON-P ... Kirby Ultimate G Bagged Upright Vacuum

Miele power plus brush model seb234/236 won't work and telescoping wand wont stay xtended


... Vacuums

Won't stay on!!! HELP!


It is the on/off switch that needs replacing. It can be done at home if you know someone who would attempt it. Overall, knowing that it is the switch, it should save money by not having them troubleshoot further. Tell them what I told you and it shou ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Vacume wont **** opened it up see nothing wrong HELP


If no suction usuallly means a clog, either in the hose and the dirt inlet by the brush roll. Sometimes if the belt is stretched, it won't turn the brush roll under load and it would seem like there is no suction. ... Sharp Twin Energy EC-12TWT4 Bagged Upright Vacuum

My dyson wont stay on


You have a defective switch, they are fairly easy to replace but i would call and sheck you probably still have it under warranty and can get it done for free\015\012\015\012Hope this helps ... Vacuums

Filter b in dyson ball wont stay in


Hi Boo,I am sorry to hear you are having difficulty with your post motor filter. Based on the details you provided, we would appreciate the opportunity to trouble shoot with you over the phone. Your post motor filter may need to be replaced. ... Dyson Ball DC24 Bagless Upright Vacuum

My polti vaporetto 2400, heats the water up, but the steam wont come out - help


... Polti Vaporetto 2400 Canister Steam Vacuum

My kenmore progressive canister vacuum powerhead wont stay on


... Kenmore 25512/ 25513 Progressive Canister Vacuum

Dyson Animal on button wont stay on.


That's the problem with dyson. They work for the first few months then start to break down. Your switch might need replacing or your cord connection is lose and causing it to short out and turn off. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Why wont hepa filter stay in the hoover vcuum cleaner


... Hoover UH70120 WindTunnel TSeries Rewind Bagless Upright Vacuum Cleaner
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0361 seconds