Having problems with your Dyson DC07 Bagless Upright Cyclonic Vacuum ?

How do I replace the microswitch in my dyson DC04 Zorbster


Answers :

Move the flexible hose at the rear out off the way and you will see a small hole that goes through to the on/off switch assembly. Use a small screwdriver through the hole to push the plastic clip away and you can then lift off the on/off button. You will then see a phillips screw that holds the switch assembly/housing to the main unit. Just unscrew and the whole switch unit can be removed.
Repair Help & Product Troubleshooting for Dyson DC07 Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do I replace the microswitch in my dyson DC04 Zorbster


Move the flexible hose at the rear out off the way and you will see a small hole that goes through to the on/off switch assembly. Use a small screwdriver through the hole to push the plastic clip away and you can then lift off the on/off button. Yo ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Replace belt on dyson dc04 zorbster


... Vacuums

Motor on dc04 zorbster slows down - Dyson DC04 HEPA Bagless Upright Cyclonic Vacuum


... Dyson DC04 HEPA Bagless Upright Cyclonic Vacuum

Dc04 belt replacement - Dyson DC04 HEPA Bagless Upright Cyclonic Vacuum


This video will show you ... Dyson DC04 HEPA Bagless Upright Cyclonic Vacuum

How to replace a belt and brush in a Dyson DC04


Hi here is a video on how to do this.........\015\012\015\012http://www.videojug.com/film/how-to-replace-the-belt-on-a-dyson-dc ... Vacuums

How to replace bottom filter on dyson dc04 cannot undo cage


Take the bucket off first.\015\012The cage is clipped at the sides and at the front.\015\012Get a flat screwdriver better still use an old credit card and carefully unclip the front first then the sides, with it being plastic it may bre ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

I have a Dyson DC04 which is making a strong burning smell within a few seconds of switching on. Is this likely to be the motor and if so can it be replaced?


More likely it is the beater brush which is jammed and not turning. Turn the machine over and remove the bottom plate. Unhook the drive belt, then try to turn the beater brush--it is likely bound up with string, thread, and hair. Try turning the mach ... Dyson DC04 HEPA Bagless Upright Cyclonic Vacuum

Replace cable or re attach cable to dyson dc04


... Dyson DC04 HEPA Bagless Upright Cyclonic Vacuum

Dyson replace clutch assembly dc04


Hi.\015\012\015\012Go to this site it has service manuals covering this problem.\015\012\015\012http://dysonmanuals.llc.nu/index.htm ... Dyson Vacuums

How do I replace the belts on a Dyson DC04 purple


That model has a clutch unit from which the two drive belts are located. It is a technical job to strip that unit down to change the belts, so the easier solution if you have a snapped belt, is to replace the clutch unit (that comes with belts ... Dyson DC04 HEPA Bagless Upright Cyclonic Vacuum

Dyson DC04 is making a grinding sound & smells of burning. Hi. I have been told that the above is due to the carbon motor brushes burning out. The brush at the bottom still turns ok. I have bought 2 new carbon brushes & wondered how I would go about replacing them. Any help would be much apprecieated!


Hi there SmartAlec from NelsonVacuums.com.au here, this is not a repair for the faint hearted. First i am assuming you are not using a clutch model - with a selector for ca ... Vacuums

How do i replace a brush bar in a dyson DC04 cleaner


... Vacuums

I have a dyson dc04 vaccuum cleaner and i want to replace the cable to the switch how do you get to the switch


Hi there SmartAlec from NelsonVacuums.com.au here. This is a bit of a tricky one on your first go so be gentle. Basically what you have to do is lift off the switch cover t ... Dyson DC04 HEPA Bagless Upright Cyclonic Vacuum

What do you do to get the most suction power from the DC04 dyson zorbster. It seems the only way to do it is to bang it which can't be the right way.The settings at the bottom do not seem to work and I have no instructions.


Clean or change the filters every 3 months and maybe have it serviced every year  ... Vacuums

Replace cord in DC04 - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dyson dc04 wont pick up,motor working,replaced clutch assembly but still dosnt turn brushes


You need to go through a process of elimination. You are better doing that here: Dyson advice forums ... Dyson DC07 Bagless Upright Cyclonic Vacuum

My older Dyson DC14 (the purple one) early model with a clutch on the beater bar belt needs a clutch replacement. The bar has been cleaned and there are no worn or damaged parts so I conclude that the clutch at the motor end of the belt needs to be replaced. I can find the part online but no instructions on how to disassemble the vacuum to get to and replace it. Dysons only advice is to give me the address and phone of the nearest service center. Can you help me?


Have a look at www.dysonmedic.com which has some very useful info on dismantling and repairing Dysons.\015\012\015\012Although this site doesnt actually cover the DC1 ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Dyson DC04 Clutch removal


... Vacuums

DYSON DC17 HOSE REPLACEMENT - Dyson DC17 Replacement Suction Hose, Part 911645-02


... Dyson DC17 Replacement Suction Hose, Part 911645-02

I have a Dyson all-floor model (not the ball). I recently replaced my carpet to a Frieze. Since replacing the carpet, the Dyson is extremely hard to push. It almost forms a "seal" with the carpet. Seems to work fine on Berber carpet and laminate floor. My husband has checked to make sure the brushes are working, hoses are not clogged and belts are OK. I've had it for about a year. It is virutally impossible to push on the new carpet. Any ideas?


Have you adjusted the brush control system. If you look at the link below page 6 will tell you how to adjust. If this is not you vacuum please give the model # of the one you have so I can help you more.\015\012\015\012 ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

Dyson dc04 instruction manual - Dyson DC04 HEPA Bagless Upright Cyclonic Vacuum


Hi there,You can download a copy of the DC04 user guide directly from our website:http://media.dyson.com/downloads/uk/floorca ... Dyson DC04 HEPA Bagless Upright Cyclonic Vacuum

Why does my dyson dc04 work for about 5 mins then cut out the wire on my dyson 04 needs replacin but i cant get the casing off. My DC04 cuts out after abou 5 minutes use. I think there may be a thermal cut-out somewhere?


Thermal cut out in coils of motor,you have not been keeping filers clea,I THINK.\015\012motor is avaliable ... Vacuums

Dyson vacuum cleaner DC04


I would suggest you invert the vacuum and remove the plate covering the spinning brush assembly. You should check the belt located on one side of the spinner brush to see if it is worn or broken. Also remove anything wrapped around the brush that cou ... Vacuums

Dyson dc04 absolute


Hi Diana.\015\012\015\012Your Dyson has A clutch this has 2 belts, One goes clutch to motor the second goes clutch to brush roller.\015\012\015\012You have either A snapped motor to clutch belt or the clutch control knob is no ... Dyson DCO7 Animal Bagless Upright Cyclonic Vacuum

My Dyson DC04 Keeps cutting out after a period of time


Check the bottom left hand corner, there should be a yellow button, that could be open, when it's open it, it won't **** ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0553 seconds