Having problems with your Dyson DC07 Bagless Upright Cyclonic Vacuum ?

Dyson DC07 Cleaner head not pivoting freely.

\015 I have a DC07 vacuum. My daughter dropped the Dyson while unloading it from the SUV. Now the problem I am having is that the cleaner head does not want to stay down as I vacuum and I continuously have to keep stepping down on the cleaner head to make it go back down to the floor. I guessing something is broken or binding. Is there a way to fix it?\015

Answers :

Does anyone have an exploded view of where this spring attaches and what it looks like. My DC07 has exactly the same problem. As you push it forwards, the head angle changes and vacuum decreases as the sole plate looses contact with the floor :(
The spring might be disattachd because of the fall check inside the cleaner head if you can attach it thank you
Repair Help & Product Troubleshooting for Dyson DC07 Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dyson DC07 Cleaner head not pivoting freely.


Does anyone have an exploded view of where this spring attaches and what it looks like. My DC07 has exactly the same problem. As you push it forwards, the head angle changes and vacuum decreases as the sole plate looses contact with the floor :( ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson DC25 Animal Cleaner Head Stays Off the Floor


Hi there,I'm sorry to hear you're having difficulties with your DC25. I'm sure we can help resolve this - please give us a call free on 1-866-693-9766, or email us at [email protected] so we can provide assistance.Best wishes, ... Dyson DC25 Animal Bagless Upright Vacuum

Dyson DC07 My Dyson DC07 vacuum sounds very very loud, it works fine but it's gone from a quiet vacuum to a loud vacuum cleaner, what can I do to make it quiet again?


Your better bar is miss alined put a felt tab (for chair legs thier sticky) on the side if the bar near the belt on the inside end re put in the better bar no more noise ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My dyson vacuum cleaner doesn't seem to have the same suction power it used to. I have cleaned out the canister and have taken apart the vacuum head (for cleaning carpets) and it doesn't seem to be blocked but it seems to lose suction by the time it reaches the head. The suction is strong at the end of the hose (where you attach the telescopic attachment with vacuum head) Any ideas? Thanks, Irene


... Vacuums

Dyson DC07 - broken 'Contact Head' release clip


Hi Wombat64\015\012\015\012We noticed you are having difficulties with your Dyson vacuum cleaner. We think we can help, simply call our Customer service team for free on 0800 298 0298 between 7am - 10pm, 7 days a week.\015\012 ... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

Dyson DC25 - Cleaner Head Brush pin broke


... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

Disassemble dyson dc28 cleaner head


... Dyson DC28 Animal Bagless Upright Vacuum

Original upright dyson - cleaner head stiff/sticky and won't stay on floor


Hi Kirsty,I'm sorry to hear you're having difficulty with your DC07.If the cleaner head doesn't seem to be pivoting freely to maintain contact with the floor, we'd appreciate the opportunity to provide further assistance. If you give ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Need to replace Dyson DC17 Cleaner Head Assy, Part Number 912276-01, are there instructions for this task?


... Dyson DC17 Animal Upright Vacuum Refurbished

How do I remove the cleaner head of my Dyson 24 upright. it has no release button like one that was featured in a how to video. ??


Some of the heads have a push button and some have u type clip you need to remove with screwdriver to flick it off ,this video on the link below will show youhttp://www.youtube.c ... Dyson Dc24 Cleaner Head Assembly

Dyson dc25 head cleaner is loose - Dyson DC25 All Floors Bagless Upright Vacuum


... Dyson DC25 All Floors Bagless Upright Vacuum

Dyson ball cleaner head - Dyson Ball DC24 Bagless Upright Vacuum


... Dyson Ball DC24 Bagless Upright Vacuum

Cleaner head will not lock on dyson dc25


The red thing you step on to lock and unlock it has two metal Dells that go into a sliding track sometimes they fall out into the whole of you have to manually you let them pretty hard and put him back in the track I just fixed mine its weird cuz whe ... Dyson DC25 All Floors Bagless Upright Vacuum

How to take apart Dyson DC 24 cleaner head assembly


... Dyson DC24 Animal Bagless Upright Vacuum

Dyson dc17 hard to depress cleaner head assembly (?)


There may be something stuck in the valve pipe assembly. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

DYson DC07 not sucking properly when in upright mode. I have tried cleaning out pipes etc and even tried an old motor section I had in garage (replaced once under warranty as kept cutting out and they left old motor section here). Even the old motor section had same prob so this suggests its something in the rest of the vacuum cleaner (whats left after you have lifted off the green motor section and dust collection area if you see what I mean? Any advice weclome please.


Blocked filters ... Dyson DC07 Bagless Upright Cyclonic Vacuum

I just purchased a DC07 Dyson vacuum cleaner. It is not vacumming my floor - I have hardly any suction at all. Do I need to activate something in order to initiate the suction?


With vac upright suction is sent to the hose ie top of vac handle when handle is tilted down to the user vacuum position it should send the power suction to the floor also make sure collection bin it in securely that make be the problem ... Vacuums

I have a dyson dc07 bagless vacuum cleaner. How do I split the top and bottom halves of the dust collection bin? There is a lever and catch on the side, I have tried pulling and turning, but with no success.


Hi at the top of the Cyclone there is a lever underneath the Handle. The Handle I am referring to says Dyson on it. Firstly you must release the Cyclone from the spine. After doing this you will be left with the Cyclone and the Cyclone Bin all in a ... Dyson DC07 Bagless Upright Cyclonic Vacuum

How do you change a brush head on the dyson dc07


It takes a special factory tool to change the belt or the brush head. You will need to send it back the Dyson in Buffalo New York. ... Dyson DC07 Full Gear Bagless Upright Cyclonic Vacuum

How do I attach a mini turbine head to my dyson dc07 upright?


Remove the handle / hose / wand assembly like you were going to use the tools. The mini turbo brush will attach to the open end of the wand. ... Dyson DC07 Bagless Upright Cyclonic Vacuum

BEATER BAR QUIT WORKING ON DYSON DC07 VACUUM CLEANER - DIDN'T KNOW IF THERE WAS A RE-SET SWITCH OR HOW TO GET THIS TO WORK AGAIN


Hi its Darran at Dyson. From your description of the problem, either the brush control has been switched off (dial on the side of the cleanerhead) or the belt has snapped which may indicate a problem with the clutch. Please ca ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

I am trying to use the quick draw hose on a dyson dc07 vacuum cleaner. I see the yellow button that I am suppose to push but I cannot find the hose


The hose is integral with the handle. If you lift straight up on the main handle while simultaneously pressing the hose release button, the hose and wand will pull out together.\015\012\015\012-R ... Vacuums

My cleaner has no suction - Dyson DC07 Bagless Upright Cyclonic Vacuum


I have cleaned (washed) the filter and this appears to solved the problem. Thanking you for your assistance. ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson vacum cleaner lost suction got the DC14 and it doesn't seem to have much suction in the floor head, the hose still has good suction. I have checked all the paths for blockage and there is none.


Hey, this is Leland with Crucial Vacuum,\012\012If your unit's suction has decreased there could be several reasons.\012\012Firstly, the motor may be the problem. If you hear any noises while the machine is running, you should contact ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

My Dyson DC07 cleaner keeps overheating and its ability to clean is not as good as it once was


Its clogged or has a "blockage" as they call it ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0767 seconds