Having problems with your Dyson DC07 Bagless Upright Cyclonic Vacuum ?

Power won't stay on unless you hold the button down . How can I fix this and what is the problem?


Answers :

You can't fix this problem yourself - a repair dealer needs to open up the button and inspect the power switch - call the Dyson helpline, they will find the closest authorized dealer in your area and if your machine is still under warranty it'll probably fixed under warranty for you.
Repair Help & Product Troubleshooting for Dyson DC07 Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Power won't stay on unless you hold the button down . How can I fix this and what is the problem?


You can't fix this problem yourself - a repair dealer needs to open up the button and inspect the power switch - call the Dyson helpline, they will find the closest authorized dealer in your area and if your machine is still under warranty it'll prob ... Dyson DC07 Bagless Upright Cyclonic Vacuum

My dyson dc14 wont stay running. if you hold power button down it runs. cleaned filters and brush and the belt is not broke. any advice on solving the problem?


... Dyson DC07 Bagless Upright Cyclonic Vacuum

My dyson wont stay on unless i hold button down


... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

Power button wont stay on. have to hold the power button manually for it to stay on.


Most likely you have to replace ON/OFF switch. look at detail instructions how to do it on our website:http://www.goodvac.com/kb_results.asp?ID=18 ... Kirby Ultimate G Bagged Upright Vacuum

Power nozzle on E-series won't start when cold unless the red 'reset' button is pressed multiple times while also holding the trigger to 'warm it up'...this is w/the power nozzle off the floor - no restriction on it turning. Once it's been running and then turned off the button must be pressed w/the trigger to get it to run - again w/the nozzle off the floor. It also seems to shut off too easily while vacuuming. I replaced the motor,which didn't fix it. Is the reset switch next on my list? T


... Rainbow E series Canister Wet/Dry Vacuum

DC26 ON OFF BUTTON WON'T STAY ON UNLESS I HOLD IT DOWN?


... Dyson DC26 City Multi Floor Bagless Canister Vacuum Cleaner

The switch seems to have a problem I push it on and it doesn't stay on even if I hold it on the brushes dont turn how do I fix this??


... Dyson DC28 Animal Bagless Upright Vacuum

On/off switch works but wont stay in on position unless you hold it down cant see how to get in to the switch this is on dc17 animal


This link will show you how to chonge the switch on your dc17\015\012http://www.videojug.com/webvideo/how-to-fix-the-lead-on-a-dyso ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

I push the button to turn it on and it doesnt stay on. if i hold it down i can vacumm but as soon as i let go it stops. how do i fix it.


Most likely the ratchet mechanism on the switch is faulty.Switches are available if you search on ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Switch wont stay on unless you hold it in - Dyson Vacuums


Hi there,I'm sorry to hear you're having difficulties with your Dyson's on/off switch. If you haven't already got in contact with us directly, I'd strongly encourage you to do so. One of our experts will be happy to recommend the best cou ... Dyson Vacuums

Vacuum will not stay on unless I hold down the power button.


Sounds like your switch has gone.Its simple to replace, only 1 "specialist" tool is needed, but you can substitute for a small screwdriver.If you visit\012http://www.sparesaver.com/help-and-support/dyson-section/dyson-technica ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My dyson dc17 won't turn on and stay on unless you hold the red button on?


My vacuum had this exact same problem, but was out of warranty because \015\012it was remanufactured. Thankfully, it's a very quick, five-minute fix.\015\012\015\012UNPLUG The Vacuum!\015\012Remo ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

My vacuum power button will not stay on unless I hold it in.


Most likely the ratchet mechanism on the switch is faulty.\015\012\015\012Switches are available if you search on eBay for a few pounds, and if you've reasonable DIY skills and tools, it's fairly easy to do.\015\012\015\012Hav ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My shop vac won't stay running unless I hold in the power button


... Shop Vac Vacuums

Bissell healthy home won't stay on unless i hold the start button


We had the same problem. Open the handle by undoing the screws and then pull one side off. Depress the button a few times and see if it catches. It worked for us and now it is just like it should be again. Good luck! ... Bissell Healthy Home HEPA Bagless Upright Vacuum - Metallic Blue

My Error light will not go off. I just bought new batterie, as I thought that was the problem. If I hold down the power button and the play button on the vacuum it will run. When released it stops. The remote will work for the unit if I am holding down the power button on the vacuum.


... Infinuvo QQ1 CleanMate 365 Robotic Vacuum

Dyson vaccum, it will not stay on, it turns itself off and I have to hold down the start button to continue vacuuming.


... Dyson DC07 Bagless Upright Cyclonic Vacuum

Vacuum will not stay on without holding down the start button


The start button is broken. Needs replacing.\015\012\015\012Charlie ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Roomba Stops I've had a Roomba for about 2 months. Lately, it runs for about 45 secs, then stops, makes a two-tone (descending) sound, and flashes the CLEAN button while the STATUS button is red. I've emptied the dustbin on it. Can you help? I am seeing the same problem on my roomba today. I cleaned all that I could., the brushes, the pins on the sides and all that and it still gives the same problem..Any other fix?


Run your roomba through a self diagnostic test. I have posted the link below. Tell me your findings.\015\012\015\012\015\012http://mysite.verizon.net/gsplews/Diagnositic-Tests_Proc.v.0.5.htm ... iRobot Roomba 4210 Bagless Robotic Vacuum

My dyson animal vacuum (~9 years old) will not stay on. I press the on/off button and it will only stay on as long as I am holding the button down. Help please!


Hi it sounds like you need a new switch ... Vacuums

On button won't stay depressed. when pushed to on, the vaccuum goes on but won't stay on unless button is held down.


Needs a new on/off switch. You can order one from an appliance parts store, and replace it yourself or take it to a shop.\015\012\015\012Charlie ... Dyson DC07 Bagless Upright Cyclonic Vacuum

When i hit the power button on my miele carina, it doesnt lock and stay on. i have to hold down the power button for the power to stay on. Please advise


Try a little WD-40 sprayed sparingly on the button. work the button a few times- may be sticky spring or contact. if that doesn't work, check with retailer where you purchased it- see if you can get a replacement switch! if you're handy, or have a ha ... Miele Carina Vacuum Vacuum

Start button wont stay on. Is there a trick to


Have a look at:\015\012\015\012http://www.dysonmedic.com/DC07%20Folder/DC07%20Motor%20change.html\015\012\015\012 ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Power button won't stay on. If I hold it down, it sucks fine, but it won't stay pushed down.


Bad switch ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Power Problem Whenver I push the power button on the handle the vacuum stays on for a few seconds then turns off. I have to push the button on the handle all the time to keep the vacuum working.


Hi There,\015\012\015\012Unfortunately this is being caused by static electricity building up in the electronic controls in the handle of the hose. I've seen this problem on numerious occasions, and in fact I have the twin brother of t ... Miele Blue Moon Bagged Canister Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0522 seconds