Having problems with your Dyson DC07 Bagless Upright Cyclonic Vacuum ?

My Dyson DC07 will not stand upright. It just lays in the recline position.


Answers :

- Stand behind the vacuum cleaner and look at the right-hand side wheel
\015\012- Remove the AI PIPE (it has two purple buttons that you push together to lift it up and out - it looks like a Tuba)
\015\012- Lay the handle down and look for a black button that will be exposed in front of the square hole
\015\012- Stick your index finger and middle finger into the vacant AI Pipe Hole (the square hole)
\015\012- Reach over with your thumb and press the black button in front of the square hole
\015\012- Whilst pushing the black button, lift your index finger and your middle finger and move the gray plastic piece up (lift the square hole basically)
\015\012- Remove your fingers from the square hole
\015\012- Lift the handle and stand your machine back upright again
\015\012- Place the AI Pipe back into the square hole
Repair Help & Product Troubleshooting for Dyson DC07 Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Dyson DC07 will not stand upright. It just lays in the recline position.


- Stand behind the vacuum cleaner and look at the right-hand side wheel\015\012- Remove the AI PIPE (it has two purple buttons that you push together to lift it up and out - it looks like a Tuba)\015\012- Lay the handle down and look for ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Placing the handle of my Dyson DC07 into its upright and locked position causes the beater bar to stop turning. It will not start turning until the handle is first lowered to the working position and the Carpet/Bare knob is moved to the Bare Floor position and then back to the Carpet position. Then the beater bar turns until the handle is placed into the upright position. What might be the problem?


Hi its Darran at Dyson.The brush control is designed to switch the brush bar off automatically when you stand the machine back into the upright position. It is designed this way to protect any delicate floor surfaces when you have the ma ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson DC01 will not lock in upright position - Dyson DC07 Bagless Upright Cyclonic Vacuum


... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson will not lock in the upright position - Dyson DC07 Bagless Upright Cyclonic Vacuum


There is a video guide here for this: \012\012 ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dc41 stuck in upright position - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi Patricia, it's Jack at Dyson.I'm sorry to hear you're having difficulty with your DC41 Animal. If it's stuck in the upright position, this may be due to a blockage in the changeover valve. This should be simple to resolve - please follow t ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson DC07 I have just got my DC07 serviced but cannot get it to stand upright - have lost my manual. Your help is much appreciated.


Hi.If you look at the front left side of machine there is a removeable inspection port it will have 2 coloured buttons you press these in & pull it up to remove.Now pull handle back as if vacuuming the floor. Now where the ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dc07 model, cannot get it to stand fully vertical upright. It is as if something is not sliding back into position right. Don't want to force it in case something breaks. The upright of the cleaner has been dropped from time to time. Any thoughts on sorting it out?. Thanks a lot. M


Hi, Try this quick repair and see if this fixes your Dyson in terms of not going in the upright position: This is a frequent problem that we see come in on Dysons. If this doesn't fix it, please feel free to just use the clarification req ... Dyson DC07 Bagless Upright Cyclonic Vacuum

My Dyson DC25 got stuck and wouldn't return to the upright position, I figured out that one side had jumped the track and gotten stuck in the square hole below the track. I did not want to break the plastic to force it back, so I removed the screw on the right side that was holding the kick stand on and removed the kick stand, also a spring thing came out. Problem is, now I have no idea how to re-install the kickstand. Can't find a technical manual or video anywhere, it can't be very difficul


... Dyson DC25 All Floors Bagless Upright Vacuum

Dyson dc07 will not lock into upright position


- Stand behind the vacuum cleaner and look at the right-hand side wheel\015\012- Remove the AI PIPE (it has two purple buttons that you push together to lift it up and out - it looks like a Tuba)\015\012- Lay the handle down and look for ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Have a dyson dc07, the belt snapped on it, changed the belt & now the rollers are constantly turning in upright position... Any advise


... Vacuums

I have a dyson DC07. The hose has come away from the hose end and the end is stuck in the top end of the wand as it sits in the upright position on the machine. Any ideas as how to get it out? If I can get it out it might just be a new hose. If not, it's a new hose and wand.t


... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

I have a Animal Dyson DC07. While cleaning the filter I laid the vacuum down . Now I can not get it to stand upright


Have a look at the following link:\015\012\015\012http://www.dysonmedic.com/DC04%20Folder/DC04%20upright%20fix.html\015\ ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

It will not stand up - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Check or replaced Upright Lock Assy\015\012Part No: 908822-01 ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson dc07 suction when upright but no suction when tilted in operate position


I had the same issue and solved it easily.My experience is the same as the March 6th response/ When you push your foot onto\015\012the base and then recline the handle, use your toe to gently push the\015\012very front of the base down closer to the ... Dyson DC07 Bagless Upright Cyclonic Vacuum

My dyson slim vacuum doesn't switch from hose to floor mode. I thought the foot lever was broken. I realigned it but it doesn't switch now from floor mode to hose mode. I take out the hose and I can see the white part. I thought it should move as you go from upright to recline position of the handle.


The changeover valve is not activating - call the Dyson helpline - they'll set you up for a repair with a repair dealer in your area. ... Dyson Slim DC18 All Floors HEPA Bagless Upright Vacuum - Iron/Titanium/Yellow

My dyson dc25 animal has locked into one position and will no longer stand upright


Hi there, we can help! Can one of our advisors on 0800 298 0298 (UK) or 1866MYDYSON and they will be able to talk you through resolving this. We look forward to hearing from you. Kind regardsDarran Dyso ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

My vacuum will not stand up - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi, Try this quick repair and see if this fixes your Dyson:Step 1.Turn power off and unplug the machine.\012\012 ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

On my dyson dc 28 the carpet cleaning bar turns easily by hand, but does not turn on when the cleaner is reclined from the upright position. The white light illuminates when preseed, but the red light does not illuminate even though the motor is running. Thanks


... Dyson DC28 Animal Bagless Upright Vacuum

Dyson DC14 Animal Vacuum - Loses suction in the reclined position. Works fine upright with the wand. Any idea what the problem is? Thanks


Check the brush bar is turned on, read this article: DC14 clutch and brushbar\015\012\015\012Then check the small h ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

How to put new cable on dyson dc07 upright - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


Have a look at www.dysonmedic.com which has some excellent info on your machine. ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

Dyson wont staND UPRIGHT


Hi its Darran at Dyson. So that we can help resolve this, please call our Helpline on 0800 298 0298. One of our advisors can through some simple checks with you which will hopefully resolve the problem. We look forward to hea ... Dyson DC25 All Floors Bagless Upright Vacuum

How to fix a new power cable to a Dyson DC07 - Dyson DC07 Bagless Upright Cyclonic Vacuum


Try this site: http://www.sparesaver.com/help-and-support/dyson-sec ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Why does my dyson DC07 not **** anymore ? - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi its Darran at Dyson. If you are experiencing a drop in performance, please follow the full diagnostics outlined in the support section on our website at www.dyson.com. If this does not resolve the issue, please contact our ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My dyson dc07 brush is not spinning - Dyson DC07 Bagless Upright Cyclonic Vacuum


... Dyson DC07 Bagless Upright Cyclonic Vacuum

How do i empty my dyson dc07 - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi its Darran at Dyson.Remove the bin and cyclone assembyl by pressing the release button above the word Dyson on the carrying handle towards the machine. Then hold the bin and cyclone assembly over a dustbin and pull the trig ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0510 seconds