Having problems with your Dyson DC07 Bagless Upright Cyclonic Vacuum ?
Doesn't rotate roller
\015 Is there a belt to replace?\015
Yes, There is a belt on the DC07. If you have the DC07 with the clutch system you need this belt:
If you have the DC07 without a clutch you need this belt:
If you have the DC07 without a clutch you need this belt:
Repair Help & Product Troubleshooting for Dyson DC07 Bagless Upright Cyclonic Vacuum
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
As you turn the Sebo on, the 2 red lights flash once and there is no motor. If you rotate the brush roller the motor starts. We've taken off the brush roller and put it back on and now it doesn't even start when you rotate the roller.
... Sebo Automatic X1 Bagged Upright Vacuum
I have an Electrolux El8502 Upright Vacuum and the brush roller does not rotate. I took off the roller and the pulley and started the vacuum. I notice that the cam is not rotating. Any suggestions much appreciated.
Hi, you can use thelink below to do a troublshooting tips for your upright vacuum..http://home.howstuffworks.com/how-t ... Electrolux EL8502 Versatility Bagless Upright Vacuum
Caught shoe string in roller brush, now will not rotate roller BR
Belt maybe streched and hardened from heat replace and try again. ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
Upright cleaner BUC11700GB. Roller will not rotate, belt intact roller free. Have removed cover and roller motor not working when switched on.
... Bosch Vacuums
Bissell Lift OfF Brush Roller Stops Rotating
They make the worst machines, the rollers are cheap and they make it so you cant take them apart to clean them. You don't want a dyson either, they aren't any better for pets. With all that hardwood floors you should get a good canister vacuum, sebo ... Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum
My Dyson Animal has good suction and works fine for actually picking up dirt, but when I use the vacuum with the roller, I hear a grinding/rumbling noise. Its only when I use the vacuum with the brush rotating. It does not happen hen I shut the roller brush off. The belt is fine. I cannot figure out what is wrong as there are no clogs, debris, or foreign objects stuck in the brush or in the belt. The noise seems to be the only issue. The vacuum picks up fine. It just doesn't sound right a
Trace the path of the suction into the tank and see if there is anything loose or ingested.\015\012Also, remove the brush and clean as best you can. Perhaps there is something caught in it. Lubricate where it makes sense with some WD40. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
Bissel 3670-2 brush -roller dose not rotate at all even after I ttry to pull the belt. Could someone please explain the "mechnis or the principles how the brsu roller works?
... Bissell 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum
The Petmate powerhead roller stopped rotating. I checked for anything binding it - nothing. There is power getting to it, just no rotation. As the guy said in the post above, it's like it is locked into the plastic housing, although it just worked last time I used the powerhead. Help!
... Kenmore 23913 Progressive PowerMate Bagged Canister Vacuum
The roller on my Dyson vacuum has stopped rotating (I still have suction) I have checked the belt (not Broken) and have checked and cleaned the roller and spindle and also checked the "auto" button setting on the vacuum but to no avail ... Anybody have any clue as to the problem Many thanks
... Dyson DC07 Bagless Upright Cyclonic Vacuum
Hoover windtunnel t series belt is loose- roller brush doesnt turn. Its brand new belt is slipping. we bough new belts and putthem on same problem. Can not find solutio in manual. Is the belt supposed to go around the "metal pulley". I know it goes around the little metal motor thing, then thru the guide and around the brush. What is the metal pulley??? Is is the larger round silver thing between the guide and roller?
I also have a loose belt and have bought additional belts but have the same problem. I put the it around the metal rotor and around the brush roller a shown by he Hoover video, and it is loose. ... Hoover S3765-040 WindTunnel Bagless Canister Vacuum
My Dyson upright is not as powerful as it used to be and the drum is not rotating. I have cleared the roller brushes and don't think there is a hose blockage.
This could be the problem ... Dyson DC07 Bagless Upright Cyclonic Vacuum
Roller Brush on Electrolux Nimble vacuum not rotating.
... Electrolux 5740 Upright Vacuum
Lg luv3008 vacuum cleaner when I move the machine, the brush roller does not rotate
... LG Vacuums
Two rollers on bottom not rotating when cleaner is on.
Drive belt on the closest roller is either chewed up, clogged with stuff or the end of the pulley is sheared off. Access is gained by removing the front piece of the nozzle (one screw in center, on top of flat deck), then the two screws on the clear ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum
No suction or brush roller rotation
... Clarke CombiVac 12 Bagged Upright Vacuum
Roller not rotating
You need to replace the belt which turns the roller brush. You can get them here:Dyson DC07 Belts ... Dyson DC07 Bagless Upright Cyclonic Vacuum
The brushs doesnt rotate
There are two belts on the 1698 one for brushes one for pump check the link belowhttp://www.vacsite.com/en/bissell-parts-1/bissell-par ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum
Dyson DC25 rotating brush doesnt work
There is a reset button on the side of the brush bar head. Press it. ... Dyson DC25 All Floors Bagless Upright Vacuum
Brush roller does not rotate around
If the rotating brush doesn't turn, then it's almost a certianty that the belt (which connects the rotating brush to the motor pulley of the vacuum) is either horribly stretched or just plain broken. Either way, it needs to be replaced. The correct H ... Vacuums
Which direction should the brush roller rotate?
Take back to repair shop that is most likely the case thank you for useing fixya please rate me ... Vacuums
ADJUSTABLE BRISSLES ONE SIDE OF MY ROTATING ROLLER IS DRAGGING AND DRAGS
You may have to replace the brush roll retainers, part #5559113, you get borth sides with this part number. After you get the part, turn the unit on its side, at each side there is a red part with one screw holding it in place, take out that screw a ... Bissell Powersteamer 1694 Upright Vacuum
Why doesnt my rootcycle dyson **** up! belt ok, emptied regularly, the handle bit where it sucks is fine but not the rotating brush. it sucks up fluff but not light dirt and bits. changed white pipe underneath as it was split.
There is a removable cover on the bottom of some Dysons which is like a U-Bend. On occasion this is a likely spot for blockages. Also make sure that all of your filters have been cleaned. Locate your local Dyson Customer Service from ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
MC-V9635 Hey i have a panasonice mc-v9635. The roller isnt working because the belt is locked so that it wont rotate.
... Panasonic MC-V9635 Canister Vacuum
Replaced belts and brush roller will not rotate.
Check to see if the spindle (small pencil-thin metal rod) is spinning where it projects from the motor. the belt wraps around this rod. if the rod is spinning when the vac is turned on your brush roller could be jammed. the bearing in the far sides o ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
Doesn't rotate roller
Yes, There is a belt on the DC07. If you have the DC07 with the clutch system you need this belt:http://vacbelts.xps.convina.com/dyson-clutch ... Dyson DC07 Bagless Upright Cyclonic Vacuum