Having problems with your Dyson DC07 Bagless Upright Cyclonic Vacuum ?

Cyclone will not spin

\015 Have cleaned out entire cyclone area, but it still wont spin. Cleaned top filter and brush at the bottom. Belt is fine, Suction seems ok at present. Do I need a new bottom filter?\015

Answers :

Even thought the belt may look fine the belt still can be worn and therefore no turn the brush or the clutch. The belts you need are these here:

DC07 with clutch belts

DC07 without clutch belts
Repair Help & Product Troubleshooting for Dyson DC07 Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dyson root 8 cyclone brushes don't spin.


Try this link below for helphttp://www.fixya.com/support/r6551937-fix_re_dyson_dc08_turbine_head ... Vacuums

My vacuum's cyclonic action is not spinning and creating very little vacuum pressure through hose or floor brush area. I already checked, brushes are spinning, there is no apparent blockage in the canister, I took it completely apart and removed excess dust from the filter. Still no good vacuum. Any suggestions?


The following filter in your in your dump cup needs to be replaced. \015\012F24 Dirt Devil "I" Bagless Upright Vacuum Replacement Filter Style F24 ... Dirt Devil M130005 Bagless Upright Cyclonic Vacuum

Bissell Power Track Cyclonic Upright Bagless Vacuum.. ..The spin brush works laying down....when upright it won't spin! I cleaned any and all hair from the roller....belt is not broken....but do I need a new belt though? The vac is a few years old bever replaced the belt yet.


You need a new belt. ... Vacuums

My hoover elite cyclonic turns on but the bagless area usually spins and holds all the dirt from the carpet. The bagless area is not spinning.


You most likely have a blockage in the suction path, or a plugged filter. ... Vacuums

The cyclone tubes have stopped spinning. - Dirt Devil Reaction Twin Cyclone Upright Vacuum


HELLO,The electric motor has a thermal switch and is self-resetting so there\015\012is no re-set switch. Make sure the air filter for the exhaust is clean.\015\012Also make sure that the height adjustment is not too low causing strain\015\012on the m ... Dirt Devil Reaction Twin Cyclone Upright Vacuum

My dyson cyclone assembly will not spin when it picks up dirt.


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=34171&thid=680773\015\012My dyson cyclone assembly will not spin when it...\015\012Posted by littleladysc on Jun 18, 2008 ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Cyclone will not spin


Even thought the belt may look fine the belt still can be worn and therefore no turn the brush or the clutch. The belts you need are these here: ... Dyson DC07 Bagless Upright Cyclonic Vacuum

DC07 Animal Bagless Upright Cyclonic Vacuum: Brushbar will not spin...


Hi there, \012There are a couple of reasons that the brush bar will not spin on a Dyson DC07. \0121. The carpet / hard floor selector is set to hard floors. \0122. There is material wound around the brush to the point that it is jam ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Problem with small belt and beater bar spinning. Where to get replacement belt and what is it called model number. Thanks. Only 2 months old 5780-900 Hoover windtunnel cyclonic


Here you can get a package of the belts you need. Also here is a link to the manual:U5780-900 Belts\015\012\015\012\01 ... Vacuums

The bottom part is not spinning - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Your belt is off or broken. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My DC07 Animal Bagless Upright Cyclonic Vacuum has a small attachment for vacuuming carpeted stairs. This attachment is currently not spinning its internal brush necessary to pickup the dirt on the stairs. The rest of the vaccum is working fine. The suction cap on this attachment is pulled out, as it should be. I have checked the vacuum over thoroguhly and there are no bloackages anywhere.


Make sure to extend the wand straight up and completely out of the handle and watch that you don't kink the hose. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

The cyclone spins, but the agitator doesn't and there is no suction.


You need to change the belt. Here is the belt you need:Eureka Boss 5856 Belt ... Eureka 5856BVZ Boss Bagless Upright Cyclonic Vacuum

Are the parts in the cyclone to spin? I thought they were and now they are not


The cyclone parts in the Dirt Cup are fixed in place. They do not spin. ... Dirt Devil Reaction Twin Cyclone Upright Vacuum

Dc07 problem I have a dc07 cyclonic vaccum and like this model,however, for some reason,it has been very dificult to push and pull for the past month or so. i have completely cleaned the brush assembly,cleared any obstructions in the hoses,and, cleaned the filter.I also checked the belt tension,wich i thought was fine but to no avail.Be advised that the brush assembly is spinning and suction is excellent. It just feels like the brush drags along the carpeting. this is a great vacuum cleaner and


The dyson uses two belts, one from the motor to a clutch and then from the clutch to the brush roller, the belts that they use are not much better then any other belt ( those you should change yearly ) but you cant just change the belts you have to c ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Wheel won't spin - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


Clean off any thread etc that may have wound around the brushes/wheels and the wheel axel ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Dyson dc05 takes the dirt up the cyclone cone instead of spinning it in the clear cannister and blocks the top filter within a few minutes??


Hi its Darran at Dyson. From your description of the problem, it sounds as though the bin inner is missing. If you remove the bin and cyclone assembly from the machine and then seaprate the two pieces as if you were going to empty it, yo ... Dyson DC05 Bagless Canister Cyclonic Vacuum

The brush will not spin - Dyson DCO7 Animal Bagless Upright Cyclonic Vacuum


... Dyson DCO7 Animal Bagless Upright Cyclonic Vacuum

Beater bar not spinning - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


That means that the belt has stretched or broken and it needs to be replaced. Here is a link the belt you need and the manual which has instructions:Dys ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Brush not spinning - Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum


Belt slipped off. ... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

Vax v5 roller not spinning even after reset - VAX Appliances Vax X5 Bagless Upright Cyclonic Vacuum


... VAX Appliances Vax X5 Bagless Upright Cyclonic Vacuum

I have a hoover windtunnel cyclonic model #5780-900. The beater brush will not spin. I have replaced the belt but it doesn't seem to engage when put into vacumm position.


Your beater brush could be frozen. Meaning the bearings are shot. You'll need to replace the brush roller ... Hoover U5780-900 Windtunnel Cyclonic Bagless UprightVacuum

My dyson dc07 brush is not spinning - Dyson DC07 Bagless Upright Cyclonic Vacuum


... Dyson DC07 Bagless Upright Cyclonic Vacuum

Brush doesn't spin. no suction felt at brush - Dyson DC14 All floors Bagless Upright Cyclonic Vacuum


Check that the brush has not become fouled with string, etc. If it still doesn't work try the following.\015\012\015\012Some Dyson's have a switch for the brush on the front of the handle. If yours does, please make sure its on. This m ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

Dyson beater bar won't spin - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


Hi its Darran at Dyson. \012he first check is to ensure that the brush control dial is set to the correct centre position when the machnie is locked upright. When you release the head the dial should move forward to the on position and th ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Is the cyclone suppose to be spinning when you vacuum? I have a Dyson DC07


The cyclone doesn't spin on the inside. The dirt will spin due to the cyclonic currents inside the canister. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0240 seconds