Having problems with your Dyson DC07 Bagless Upright Cyclonic Vacuum ?
The **** tion works through the hose and base but
\015 The suction works through the hose and base but only without brush. As I turn on the brush there is a terrible noise vibrating all around the brush control knob. 1 small piece of metal appeared, 3mm cube, with tiny spring looking wire to it 3 mm long. Have read that if belt thing we need to repace the whole drive??thank you\015
Yes - it sounds very much as though the brush control clutch has disintegrated. It is possible for the keen amateur to fit a new one, but there's quite a bit of dismantling involved so it's not a job for the faint-hearted. If you want to get an idea of what's involved, go to www.dysonmedic.com then scroll to the bottom of the page and click on "DC07 clutch replacement" where you will find an excellent illustrated guide.
Repair Help & Product Troubleshooting for Dyson DC07 Bagless Upright Cyclonic Vacuum
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
The **** tion works through the hose and base but
Yes - it sounds very much as though the brush control clutch has disintegrated. It is possible for the keen amateur to fit a new one, but there's quite a bit of dismantling involved so it's not a job for the faint-hearted. If you want to get an idea ... Dyson DC07 Bagless Upright Cyclonic Vacuum
I was vacuuming and part of a towel got sucked up, but not into the hose, and now it isn't working. I turned it off, unplugged it, and the hose still works with the attachments, it is just the base
Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=833476\015\012Generic problem for all Vacuums\015\012I was vacuuming and part\015\012Posted by melly648 ... Vacuums
Hi, my Dyson slim does not have any suction in the wand/hose. The vacuum itself works, just not the hose. I have unattached the hose, by unclipping it at the base, to make sure there are no rips or
Your changeover valve arm is more then likely broken or cracked. If so you will have to change out your under carriage assy. it's a pretty big job. I would recommend having an authorized Dyson service center change this for you as pretty much the who ... Dyson Slim DC18 All Floors HEPA Bagless Upright Vacuum - Iron/Titanium/Yellow
My BROAN CV-110 hose with the rug beater only works if I turn it on from the base unit. Shouldn't it turn on when I plug the hose into the wall recepticle? Do I need to replace the hardware at the end of this hose and if so, where would I purchase that? This central vac came in a house I just purchased. Thanks for any help. Sherry
... Broan-NuTone CV450 Central Bagged Central System Vacuum
The base will not work, only the hose section
... Dyson Dc 41 Ball
Hoover Turbo no suction at the base, hose works fine. .
Take the brushbar out and you will find the pipe behind it will be blocked with fluff and dirt ... Hoover Vacuums
Beater bar The beater bar will not work. I have changed the belt and there is a lot of suction from the hose. Just seems like the base is not turning on
You may have a bad switch, one part of it is not turning on the brush roll motor. It could also be the brush roll motor. ... Clarke CombiVac 12 Bagged Upright Vacuum
Eureka 4470 The suction works from the hose, but not from the base. I do not know how to remove the cover to check the inside.
Take apart botem 1st cheak the hoses for sumthign in there ok stick a hanger in it poke it out from bottem side under ... Eureka Smartvac 7975 Vacuum
The base is not sucking ,only the hose works - Hoover Vacuums
Is the beater bar turning ???if not belt broken if so tube from beater bar to hose stoped up ... Hoover Vacuums
My bissell cleanview is blowing not sucking in the base. the hose works fine and the bruch appears to be rotating fine.
Try reversing your hoses.\015\012Hope this helped.Let me know by rating meFor more help go to live chat.lenwest ... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum
Beam solaire hose only works to suction The power head isn't working. Have another hose and the power head does work on that one so I know it is the hose
My hose no longer works no suction buth the vacuume still works how do i fix I checked the hose checked the filters nothing works to get my hose so it has suction.
Check the following after unplugging the power cord from the outlet.\012\012- Check for suction at the back of the unit, after removing the hose where it attaches to the back of the vacuum. If there is NO suction, the machine will need to be ta ... Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum
We have an Epic6500. when we plug it in the machine works without the hose. We even purchased a new hose thinking there was a problem with the hose. However as soon as we put the hose on the machine the machine does not work. What do you think the problem may be?
Wow, this is a good one. I wonder if anyone has wrked on this machine before. Do you remember what happened when it stopped working / Obviously there is a foul up in the wiring. I need more info. When the machine is on does it shut off as soon as the ... Electrolux Epic 6500 Vacuum
Hose attachment not working well.
You don't say what model of Dyson you've got. It's listed on FixYa under DC14 Animal, but sometimes things get listed incorrectly. If it is a DC14, there are several places to check for blockages: 1. remove the wand and check it; 2. remove the hose a ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
Bissell lift off pet-no suction through base (hose is fine)
I had a similar problem with mine. When you take the collector container out, if you reach your hand up, you will fill a round, plastic piece. Gently turn it and the piece pulls out. On the outside of the piece is a foam filter that may be plugged ... Bissell 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum
My Bissell BS3920F upright (similar to the 10N6F) has been working wonderfully for the past 3 years but suddenly seems to not pick up dog hair as well as it used to. It has been pulled apart by my husband to ensure nothing is blocking the hoses etc and when running the suction seems to be there. It seems to grab the dog hair and leave it in a straight line directly under the unit without picking it up. I then disconnect the hose and use to hose to pick up the dog hair. This works well but obviou
Check to see if your brush is not worn down, they do wear with age - compare the length of the bristles with a new one. Replace the brush ir there is a significant difference in bristle lengths. Also check the flexible ben ... Bissell Vacuums
I have the Eureka The Boss Power PLus Model # 4703 Type A. When using the detached hose and wand it works OK; however, when using the Vacuum with the hose attached it doesn't work well at all.
Dyson DC14 won't **** from hose but works fine otherwise
There is probably a clog in the U-bend on the back of the unit at the bottom. Removed with a twist of a plastic screw by a coin or screw driver. If not in the U-bend check in the hose/wand. ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
On my DC17, the wand is not working right. The upright part works fine, but when I go to use the wand, the hose sucks in on itself. I get suction for a few seconds, then the hose collapses in on itself and no more suction.
... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum
I have the IROBOT discovery that just got a new battery. IT ran great! As the battery was dying, I put it into the home base. The "brick" is green, the home base has two green lights and the on/off pulsates red. It never charges though. Eventually the red light stops pulsating. Customer service said to reset it, clean the metal, and nothing works! They told me to just buy another one. The problem is that I know it was working! Help!
The best thing that you can do is take the charger into somewhere that can test it for the proper output voltage. It should be somewhere very close to 22 volts with no fluctuation. The charger is the easiest thing to test in this case. ... iRobot Roomba 4210 Bagless Robotic Vacuum
Suction hose I can't get the suction hose to work...and I have cleaned it out to make sure it isn't plugged. There is a small amount of suction just not enought to pick anything up.....the floor part works great...what could be the problem
I would first double check the hose, remove it and drop a marble through it to be sure. make sure the bag is new and also check the filter underneath the bag if it is clogged it could cut the suction. ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
My shopvac ultra pro 5.5 gal will work except will not pump water through a hose. it just shuts off when the tank is full. how do i get the hose working ?
... Shop Vac 962-12-00 Ultra Pro Wet/Dry Vacuum
Bissell 2x has suction coming out of the "base" part(when I put my had over the rubber ring that leads from base to the handle part there's suction), but there's no suction coming out of the hose. I'm not certain if there's a clog, 'cause I can't get the hose off.
... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum
No suction when hose is removed from base
Most suction problems are caused by a clog from picking up something you probably didn't see or if you have pets an accumulation of pet hairs!To clear it out take a metal coat hanger and unbend it til it's straight, then bend the end and ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
The hose on my Samsung 9048R is torn partly from the swivel base. The main problem is that the carpet attachment with the beater bar will not operate now. My brother checked the connectivity at both ends of the hose and there is juice at the bottom swivel part but at the other end of the hose where the carpet wand plugs in it is dead. is there any way to fix this? How does the wire go up through the hose? I have looked around on the internet and it would seem that the entire hose assembly is
... Samsung Quiet Storm 9048R Bagged Canister Vacuum