Having problems with your Dyson DC07 Bagless Upright Cyclonic Vacuum ?

Brush wont revolve - Dyson DC07 Bagless Upright Cyclonic Vacuum


Answers :

Hi there,
There are a couple of reasons that the brush bar will not spin on a Dyson DC07.
1. The carpet / hard floor selector is set to hard floors.
2. There is material wound around the brush to the point that it is jammed.
3. The brush roller bearings are full of dust and rubbish so they have siezed up.
4. One of your belts
has snapped (there are 2)
5. The clutch is faulty.
Now to describe how to check each of these is a full essay so I have made a video instead. I have gone through each of these except maybe point 1 because it is self expainatory.
Have a look at the video and if it is helpful then please leave me a thumbs up, a comment or a testimonial.
If you find out that you need parts have a look at
Nelson Vacuums or VacuumSpot.
Hope this is helpful!

\012

Repair Help & Product Troubleshooting for Dyson DC07 Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Brush wont revolve - Dyson DC07 Bagless Upright Cyclonic Vacuum


Hi there, There are a couple of reasons that the brush bar will not spin on a Dyson DC07. 1. The carpet / hard floor selector is set to hard floors. 2. There is material wound around the brush to the point that it is jammed ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Brush not revolving - Dyson DC07 Bagless Upright Cyclonic Vacuum


Hi there, \012The basic reasons for the brush not turning are as follows \012problem with the bearings of the brush roller\012problem with the belts\012problem with the clutch\012Or the vacuum is set to Hard Floors. ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Brush wont spin - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


Hi there VacuumGuru here. The key things to check are roller brush bearings, belt and clutch. It is a li ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

My dyson dc07 brush is not spinning - Dyson DC07 Bagless Upright Cyclonic Vacuum


... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson dc07 brush not turning belt is intact? - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


DC07s have two drive ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

How to change brush belt on dco7 dyson - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


This depends on whether your DC07 has a brush control clutch or not. For excellent illustrated guidance go to www.dysonmedic.com and click on DC07. For belt change on a model without clutch click on "belt and brushroll". It's simple! For models with ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

The brush wont turn on my dyson DC 14 - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


Sounds\015\012 as if you need to replace the brush belt.JimLet me know if this helps. ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

"CHANGING CARBON BRUSHES ON A DYSON VAC" - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


You dont need to replace with new motor,i just replace the brushes not had no problem yet.. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

DC07 brush does not turn - belt intact - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi there, The problem is likely to be \012a) The selector on the front of your machine is set to hard floors\012b) The ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson wont turn on and its a bit smelly - Dyson DC07 Bagless Upright Cyclonic Vacuum


It sounds like the motor has overheated and has now been irrepairable damaged. The motor has a built in over-current trip to protect itself (and you if it seriously overheated and caught fire). This normally automatically resets itself, however ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson Animal handheld brush not turning - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi its Darran at Dyson.We would recommend checking it for a blockage and a removing any hair or fibres from the brush bar. As the brush bar relies on the suction power of your machine, it would be worth cleaning the filter and ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson animal dc 24 spinbrush wont spin - Dyson DC07 Bagless Upright Cyclonic Vacuum


... Dyson DC07 Bagless Upright Cyclonic Vacuum

The brush quit turning while i was vacuuming - Dyson DC07 Bagless Upright Cyclonic Vacuum


Could be some debris is caught in brush or belt broke. ... Dyson DC07 Bagless Upright Cyclonic Vacuum

No suction at brushes - Dyson DC07 Bagless Upright Cyclonic Vacuum


It may be clogged dissconect hose use a brom handle and push it through to garbage..also chek under bottom of vac behind brush ull need a star screwdriver or a butter knife works as good..check all places dirt can clog.good luck hope i helped ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Brush doesn't turn and belt apears good - Dyson DC07 Bagless Upright Cyclonic Vacuum


If your unit has a large knob on the right side of the cleaner head as you hold it when cleaning then your unit has a clutch this clutch has two belts in it so the brush belt may appear ok but the motor belt might be broken it is not an easy repaer ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Brushes not turning - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Is the motor operating when switched to "on " position? Is so I would have to assume that the belt is broken to the power brush /head. Did you happen to smell burning rubber at all when the brushes stopped working? Look in your manual for replaci ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Brush will not rotate - Dyson DC07 Bagless Upright Cyclonic Vacuum


Hi there, if your brush is not spinning on your dyson dc07 it will either a problem in the clutch, belts or brush roller bearings. I have made a video showing how to access all these parts it is not especially easy to do so watch the whole video to m ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Loud screech when engaging brush - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


You will need to have the clutch change or the brushroll replaced. to change the brushroll you will need a special belt tool. you can get one on ebey for about $15. you could call dyson and find one of the service centers in your area. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Belt for brush not moving - Dyson DC07 Bagless Upright Cyclonic Vacuum


Hi its Darran at Dyson.Try checking the brush control to ensure its in the correct position before you start vacuuming. When the machine is stood upright, it should be in the centre position and when you release the head the dial should ... Dyson DC07 Bagless Upright Cyclonic Vacuum

The brush not turning - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Belt could be worn, brushroll bearings could have gone. Even the clutch could be broken.Is the brushroll jammed? ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Brush not turning - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


That is usually caused by a worn, stretched or broken drive belt. Here is a link to the replacement belts you need and to a manual that you can view which has instructions. It's really simple. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Brush doesn't fluff my carpet - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


That means that the belt is worn or stretched and it needs to be replaced. This belt should be replaced yearly. It's easy to do - Here is the belt you need and the manual with instructions: ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

Base of the hoover wont stay on the floor - Dyson DC07 Bagless Upright Cyclonic Vacuum


Check or replaced Upright Lock Assy\015\012part no:908821-01 ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Brush is not turning - Dyson DC07 Bagless Upright Cyclonic Vacuum


Hello. generally when the brush will not turn it is either clogged with debris or the drive belt is broken. Check for debris first and remove whatever you find. then see if there is resistance when you manually turn the brushes. Joe ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Roller brush does not turn when vacum is on - Dyson DC07 Bagless Upright Cyclonic Vacuum


The belt is broken or stretched. You can get replacement belts for the DC07 here:Belt for DC07 with clutch ... Dyson DC07 Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4648 seconds