Having problems with your Dyson DC07 Bagless Upright Cyclonic Vacuum ?

My dyson will turn on but not stay on - Dyson DC07 Bagless Upright Cyclonic Vacuum


Answers :

If it is cutting out after some use, this means it is clogged. Start with checking your filters. There are videos here: Looking after your Dyson.
Repair Help & Product Troubleshooting for Dyson DC07 Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My dyson will turn on but not stay on - Dyson DC07 Bagless Upright Cyclonic Vacuum


If it is cutting out after some use, this means it is clogged. Start with checking your filters. There are videos here: Looking after your Dyso ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson vacuum turned off while vacuuming - Dyson DC07 Bagless Upright Cyclonic Vacuum


Hi There, Assuming if you leave it for an hour and come back to it that it works again you have an airflow issue. This machine will cut out if the motor gets too hot. The likely causes are 1. ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson dc07 brush not turning belt is intact? - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


DC07s have two drive ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

Dyson DC07 turns off - Dyson DC07 Bagless Upright Cyclonic Vacuum


... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson will not stay on - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


It may have a bad on/off switch ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson Animal handheld brush not turning - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi its Darran at Dyson.We would recommend checking it for a blockage and a removing any hair or fibres from the brush bar. As the brush bar relies on the suction power of your machine, it would be worth cleaning the filter and ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

DC07 brush does not turn - belt intact - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi there, The problem is likely to be \012a) The selector on the front of your machine is set to hard floors\012b) The ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

DYSON POWER SWITCH TURNS OFF - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson Dc 24brush bar will not turn - Dyson DC07 Bagless Upright Cyclonic Vacuum


This video may help you ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson wont turn on and its a bit smelly - Dyson DC07 Bagless Upright Cyclonic Vacuum


It sounds like the motor has overheated and has now been irrepairable damaged. The motor has a built in over-current trip to protect itself (and you if it seriously overheated and caught fire). This normally automatically resets itself, however ... Dyson DC07 Bagless Upright Cyclonic Vacuum

The brush quit turning while i was vacuuming - Dyson DC07 Bagless Upright Cyclonic Vacuum


Could be some debris is caught in brush or belt broke. ... Dyson DC07 Bagless Upright Cyclonic Vacuum

The beater bar won't turn - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


Replace the belt - it is broken or has a flat spot on it. ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

Red button won't stay on - Dyson DC07 Bagless Upright Cyclonic Vacuum


Greetings,\015\012\015\012Most likely your switch has gone bad, and you'll need to replace the on/off switch on your Dyson DC07. If you have to hold down the switch in order to keep the vacuum on, this is indicative of need ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Power switch won't stay on - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


The only fix for this problem is to replace the power switch. Any vacuum repair store can do this for you or order you thepart. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Brush is not turning - Dyson DC07 Bagless Upright Cyclonic Vacuum


Remove the bottom brush cover and replace the belt. ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Belt not turning on carpet mode - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi, you say belt not turning on carpet does this mean the belt is turning if you tip the vac onto its back does the brushes then spin round as normal, if this is the case then this means that all you need toy do is get a replacement belt these can be ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Carpet bar doesn't turn - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


This is either a broken belt, or a faulty clutch.\015\012\015\012DC07s have two belts - one connects the output of the motor to the clutch, the other connects the clutch to the brush bar.Unfortuenately one of the belts is hidden und ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

Bottom wheel won't turn and belt is on - Dyson DC07 Bagless Upright Cyclonic Vacuum


Hello,When a Dyson DC07 roller brush does not spin, it can only be caused by one of two problems.The Dyson DC07 uprights use a\015\012 clutch mechanism to control the brush spinning when you change the \015\012floor / carpet s ... Dyson DC07 Bagless Upright Cyclonic Vacuum

The brush not turning - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Belt could be worn, brushroll bearings could have gone. Even the clutch could be broken.Is the brushroll jammed? ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Roller brush does not turn when vacum is on - Dyson DC07 Bagless Upright Cyclonic Vacuum


The belt is broken or stretched. You can get replacement belts for the DC07 here:Belt for DC07 with clutch ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Brushes won't turn but vacume runs - Dyson DC07 Bagless Upright Cyclonic Vacuum


I suggest you check the drive belt, located under a cover on the bottom of the unit. It may appear to be good (tight and not worn) but 9 times out of 10 that is the problem. ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Stopped running. won't turn on - Dyson DC07 Allergy Blue/Turquoise Bagless Upright Cyclonic Vacuum


Check power cord or replaced Powercord Assy part no : 905449-04\015\012check power switch or replaced power switch part no : 910971-01 ... Dyson DC07 Allergy Blue/Turquoise Bagless Upright Cyclonic Vacuum

Got hot and turned off - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Getting too hot is a sign that the air flow is restricted ... that could be a clogged filter, hose or air intake ... there is a thermal breaker in the moter that will shut the machine off if it gets too hot .. it will automatically reset in 5-10 minu ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Base of the hoover wont stay on the floor - Dyson DC07 Bagless Upright Cyclonic Vacuum


Check or replaced Upright Lock Assy\015\012part no:908821-01 ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Belt not turning, it is not broken - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


The shaft that makes the belt spin is most likely not spinning. Take it into a vacuum shop ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1428 seconds