Having problems with your Dyson DC07 Bagless Upright Cyclonic Vacuum ?

Dyson DC07 Original won't pick up at base

\015 It looks as if the belt is not turning, but there is no suction at the base of the vacuum cleaner, either. The attachments have good suction, but the base has none. I have checked all areas of the vacuum cleaner for blockages, but there are none. The brushes have been cleaned, so turning would not be obstructed by debris. The filter has been cleaned.\015

Answers :

Hi,
\015\012
\015\012Lie machine on its side pull back handle as if vacuuming & switch on (KEEP YOUR FINGERS & ANY LOOSE CLOTHING CLEAR OF BRUSH ROLLER)
\015\012
\015\012Brush should spin if it doesnt ensure clutch control knob on side of machine is in drive position if it isnt rotate knob by hand to drive brush should now spin.
\015\012
\015\012If it doesnt & your machine has A clutch either clutch will need replacing or belts will need replacing.
\015\012
\015\012Manuals are available to replace belts & remove the clutch from this site http://dysonmanuals.llc.nu/index.htm
Done as you advised and now picking up no problem. Thanks
Repair Help & Product Troubleshooting for Dyson DC07 Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dyson DC07 Original won't pick up at base


Hi,\015\012\015\012Lie machine on its side pull back handle as if vacuuming & switch on (KEEP YOUR FINGERS & ANY LOOSE CLOTHING CLEAR OF BRUSH ROLLER)\015\012\015\012Brush should spin if it doesnt ensure clutch contr ... Dyson DC07 Bagless Upright Cyclonic Vacuum

DYSON DC07 ORIGIN BRUSH ROLLERS WONT ROLL WHEN HOVVERING BURNING SMELL AND SMOKE FROM BOTTOM OF HOVER ROLLERS WILL MOVE BY HAND ANY IDEAS, THERES NO BLOCKAGES.


Hi There, Ok so I have made a few videos about what to check when you have issues like this. THere are 3 possible causes. 1. THe bearings in the brush roller are worn so even though you can turn it by hand the belt cannot.2. The clutc ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Hard to push wont pick up - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi David,I'm sorry to hear you're having difficulties with your DC07. If the machine doesn't seem to be picking up as well as usual, there may be a blockage in the machine - the filter may also need a wash.To locate and remove any blo ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Base of the hoover wont stay on the floor - Dyson DC07 Bagless Upright Cyclonic Vacuum


Check or replaced Upright Lock Assy\015\012part no:908821-01 ... Dyson DC07 Bagless Upright Cyclonic Vacuum

My dyson dc07 wont turn on. is there a motor reset button on the dyson dc07


No it does not have a reset button av you checked the fuse in wall plug if OK it's most likely the switch as gone bad here is a video how to replace ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson DC07 hi My dyson dc07 wont power up, any thoughts on what could be causing the fault. ie does it need new motor.


First, check your outlet for power...plug something else in. Then, inspect the cord and check the power switch. You can use a multimeter to test across the power plug of the vacuum in the ohms position. Turn the switch off and on. If it does not ... Dyson DC07 Bagless Upright Cyclonic Vacuum

My dyson ball wont pick up


You may have a blockage in the machine or the internal hose has become dislodged. Call the Dyson helpline for a thorough troubleshoot and solution. ... Dyson DC07 Bagless Upright Cyclonic Vacuum

My dyson dco4 wont pick up when upright


Check the internal pipe underneath is not split ... Dyson DC07 Bagless Upright Cyclonic Vacuum

My dyson dc07 wont work using the hose i have


Theres a o ring when u tilt the dyson from upright to 45 degree you will see it its either come off or the plastic housing that it sits in is not inline ..mark ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

Dyson not picking up dirt - Dyson DC07 Bagless Upright Cyclonic Vacuum


... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson animal dc 24 spinbrush wont spin - Dyson DC07 Bagless Upright Cyclonic Vacuum


... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson dc33 wont pick up. - Dyson DC33 Bagged Upright Vacuum


... Dyson DC33 Bagged Upright Vacuum

Dyson DC07 My DC07 has been working fine, but now does not pick up. If you put hand over the tube end the suction is fine. Any ideas. Thanks


This is an incomplete solution. Mine (DC 14 Animal) worked great and\015\012then it didn"t and then it did after checking to make sure that all the\015\012parts were on securely. I noticed that while the suction sort of seemed\015\012normal, it was n ... Vacuums

My hose tools wont pick up. when hose tools unattached suction is fine and will **** my hand fiercely, but once tool attached no suction..... how am i gonna pick up cat hair from seats now?! its a dyson DC04 but it wouldnt let me choose that!


I have a DC04 and the hose tools are a open hole.The only reason they want pick up is they are blocked.If you say they are sucking your hand when not attached.Make sure the hose is not blocked by taking off the cover at the front.Allso check the cyli ... Dyson DC07 Allergy Blue/Turquoise Bagless Upright Cyclonic Vacuum

I have a DC07 which is not picking up very well. I've cleaned the pre motor filter, was not aware of the post motor and will check. However, do the Dyson brush rollers wear to the point of not picking up things from carpet?


Hi The filter is only part of the cleaning process with a Dyson.\012\012I would suggest you get a 2 p peice and unscrew the plastic screws on the base. You will likely find that this area has clogged up. Clean this area out and put solepl ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Ive got a dc07 dyson just changed the belt on it as i had to since then it isnt picking anything up at all nothings clogged up had it to bits and put it all back together again properly. The hose is working when i take it off its got plenty suction but when i run it along the floor it picks absolutely nothing up any ideas that i havent thought off. Thanks


Sounds like the hose underneath has become detached. Have a look and if its not that come back to me. Also can yo9u check your U Bend is still on as these can come off. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

I am trying to find a Manual for my dyson dc07 to find some replacement parts. I have the original dc07. but having pulling up a manual


You can view the manual here:Dyson DC07 Manual ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson wont turn on and its a bit smelly - Dyson DC07 Bagless Upright Cyclonic Vacuum


It sounds like the motor has overheated and has now been irrepairable damaged. The motor has a built in over-current trip to protect itself (and you if it seriously overheated and caught fire). This normally automatically resets itself, however ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson dc27 wont pick up


... Dyson DC27 Bagless Upright Vacuum

Replace belt on dyson dc07 original


Click the link below for full instructions how to change belt on dc07http://www.youtube.com/watch?v=C83DeJtY6lA ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Why won't my dyson dc07 pick up


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

DYSON WONT PICK UP


It sounds like there's something wrong with the changeover valve. This determines whether the airflow is directed to the cleanerhead or the wand and I think also provides the resistance to keep it upright. It's the bit above the right wheel as you st ... Dyson DC07 Bagless Upright Cyclonic Vacuum

I have a Dyson DC07 that does not pick up the dirt as well anymore, can you suggest a repair shop in the 60637 Chicago area?


You can call dyson and they will tell you where the closest service center is here is their web site http://www.dyson.com/homepage.asp ... Dyson Vacuums

I HAVE A DYSON DC07 I HAVE CHECKED ALL HOSES AND PLASTIC ATTACHMENT SECTIONS , CANNOT FIND ANY BLOCKAGE ANYWHERE IN THE SYSTEM .THE BELT IS GOOD AND THE BEATER BAR IS ROTATING WELL , BUT THIS VACUUM WILL NOT PICK UP ANY THING. I DID NOTICE THAT THE HEPA LIFETIME FILTER IS BLACK AND NOT SURE IF IT CAN BE WASHED OR CLEANED. THANKS BOB!


I have just cleaned mine just a half an hour ago - SAME PROBLEM !!\015\012ok take the dust cylinder off the vacuum cleaner and take the plastic clear cylinder off - there is a clear clip one side and you might need a small knife to unclip other ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson dc07 yellow/blue no suction at base


Sounds like you've **** up something which is obstructing the suction from the brush bar. There's a little section of curved grey pipe near the base which carries the dirt from the head up the vertical pipe at the back. This section can be removed, c ... Dyson DC07 Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0480 seconds