Having problems with your Dyson DC07 Bagless Upright Cyclonic Vacuum ?
It's not picking up dirt on floor settings and very noisy
Repair Help & Product Troubleshooting for Dyson DC07 Bagless Upright Cyclonic Vacuum
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
It's not picking up dirt on floor settings and very noisy
... Dyson DC07 Bagless Upright Cyclonic Vacuum
The vacuum cleaner does not pick up anything from carpet. It does not even pick up pieces of thread laying on carpet. On tile floors it blows dirt away instead of picking it up. I've tried all the settings on the brush and nothing works. It has done this since new
Sounds like there is a clog..\015\012\015\012Usually its in the hose - look closely.. Stretch the hose out straight and look in there good..\015\012\015\012Or a clog could be in the vac close to where the hose conects to the v ... Hoover U5269910 Bagless Upright Vacuum
Does the epic 3500 have a belt? It seems that when running on the carpet setting, it is very noisy and is not picking up the way it should. When we run it on the floor setting, it sounds better, but the rolloer doesn't go around to fluff the carpet. What is wrong?
Yes, it does. It definitely sounds like a broken belt. And the noise would probably be due to the belt still being in the machine and hitting the motor shaft.\015\012Due to some difficulty in reassembling the powerhead and getting the belt to ... Electrolux Epic 3500 Vacuum
I have the bissell powertrak revolution. I have hardwood floors...even on the lowest setting it is throwing some dirt back at me instead of picking it up....
Do not worry about this....it is a common issue with every brand of vacume this style....the poblem is not of power or quality..but rather one of friction or lack of resistance because of the smooth floor surface....carpet surfaces permit the brush p ... Bissell 6591 Power Trak Revolution Bagless Upright Vacuum
My Kirby Heritage II vacuum is not picking up dirt up out of the carpet like usual, and I have to keep setting it lower to pick anything up. I finally get it to such a low setting that it starts sucking the carpet up and makes a whirring noise, and starts smelling. Every time this happens, we find the belt has been burned. We are wondering if the brush roll inside with the brushes that pick up dirt are worn out and too short?
... Kirby Heritage II Vacuum
When i turn on vacuum it spreads the dirt i am trying to pick up all over the floor, then a need to revacuum the floor. Pls help.
Sounds like you need to change bag and clean out hose and dirt channel underneatch behind brushroll. ... Eureka 4700A Maxima Bagless Upright Vacuum
Isn't picking up lint. Will pick up other things like flecks of paper but will not get any fuzz or fibrous material off any rug no matter what the setting. This is a recent problem. Have owned the vacuum for awhile and never seen this issue before. Is it an easy fix? I've cleaned the brush, cleaned out the filters, cleaned the dirt tank. Nothing changed.
Is the brush turning on the bottom of the machine ? If not It could be clogedup with stuff or the belt could be worn on it and it will turn but as soon as it contacts the floor it will stop turning. The belt is easy to replace by removing screw ... Bissell 3576 CleanView II Bagless Upright Vacuum
Vaccuum issue I just bought a Eureka upright model 5892 BVZ, my concern is, I bought it on sale (floor model) and it didn't have a manual with it. I took it home and tried it, and although it appears to be working very well there is not dirt in the catch bin on the front of the unit. I tried the hose w/attachment and again it worked very well in picking up the cat hair, but where does the hair and the dirt go, I am afraid it is spitting it back out somewhere since I can not see anything in the c
If the dirt being vacuumed is not going into the dirt cup, then it must be just stuck in the hose and evenually will clog up. Check the hose and see it there is a clog in it, otherwise you have a years warranty on a new vacuum, take it into a warran ... Eureka 5892AVZ Bagless Upright Cyclonic Vacuum
Brand new Eureka Whirwind Model 3272 Type -AV won't pick up on bare floor or if it does the dirt comes out again on the floor
... Eureka Vacuums
Hello, I have the same model. And though it is three years old, starting from the last month, it does not clean anything anymore. Cannot even pick up one single thing from the floor. Every dirt gets stuck in the hose. I cleaned the hose and cleaned the filters but it still does not pick anything up. Is three years its normal lifetime or do I have the change the filters, instead of cleaning them? Thanks.
I know bissell vacuums are very cheap but they should last more than 3 years. there should be two parts to the dirt cup. remove the dirt cup and above it there should be a round plastic part. unscrew it and check that filter. ... Bissell 6594 PowerForce Bagless Upright Vacuum
My vaccuum is not picking up anything off the floor. I have changed all the settings to try them and I have checked all the filters..
Stopped up. check the belt area at the hose. ... Bissell 4104 Bagless Upright Cyclonic Vacuum
Need Kirby Generation 3 Vacuum cleaner manual. Vacuum is not picking up dirt from floor. Seems to have enough suction to inflate the bag, but when you check the suction under the vacuum, there seems to be extremely litle suction.
If your brush roll is turning and your bag is not overly full, then the only other thing it can be is a clog where the bag connects to the vacuum. Turn the plastic part out away from vacuum and lift off to see if you have something clogging it. It ... Kirby Generation 3 Bagged Upright Vacuum
It will not pick dirt on the floor lint or anything else. Checked all the hoses for leaks and clogs, and have nothing blocking the path way.
Please check your hoses again. Run a broom stick handle through if necessary. Check the passage of air through the hose by applying suction from another machine ... like a ShopVac or similar. Somewhere, there is a clog. ... Vacuums
The carpet and floor vacuuming function is really weak. It pushes the dirt around more than it picks-up. The hose attachment has lots of vacuuming power. Scott Macaulay
Hi,Here is a tip that I wrote about my Bissel but I bet you have the same problem and the hose is clogged...Bissell Bagless Upright ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
The suction will pick up and spit dirt back out on floor
This is an indication that the intake is clogged. Needs disassembly and cleaning.\015\012\015\012Charlie ... Dirt Devil M130100 ''i'' everclean Dual Cyclonic Upright Vacuum Cleaner Vacuum
Vacuum picks up some dirt and debris but not all, and spits some back out?
Some blockage at the pickup or in the hose if it uses one---dirt etc being kicked back out is a clear sign of this----if it has a tube check that first, and if a head with turning brush do not miss looking for a blockage there. ... Eureka True Clean Upright Vacuum (Yellow) 2961BVZ
I have a power drive baggless vacuum cleaner...it runs well, but suddenly it seems to have lost most of the suction coming through the hose and floor area. When I remove the dirt container, the suction below it seems strong. I have had it to repair twice--they have tuned it up and replaced all filters and belt. It still does not pick up well when I vacuum or use the hose. Can you help ?
There is something stopping it up,you will have to dissasemble the unit to find the blockage,this is the most likely problem. ... Hoover U6660-900 WindTunnel Bagless Upright Vacuum
Hi my dyson dc07 allergy is not picking up the dirt from the floor or carpet . I have cleaned it's filters emptied it's dust but nothing works
I would do a quick swap out of the cyclone unit and see if there is a difference, also did you clean out the cyclone recently/ever? ... Dyson DC07 Bagless Upright Cyclonic Vacuum
The hand cleaner picks up dirt but the floor cleaner does not.
The belt could be broken. Take out the four screws on the bottom of the vacuum and remove the plate - your belt will likely be ripped in half ... Dirt Devil Featherlite Bagless Vacuum M085845Vacuum
My Dirt Devil Reaction will work with the hose attachment but will not pick up from the floor. What could be wrong?
With all upright vacuums the problem could be one of two things on it in this situation. \012\0121) the belt may be broken or slipping and is needing to be changed. \012\0122) the lower area below the hose attchment and the ro ... Dirt Devil Reaction Twin Cyclone Upright Vacuum
Uh70015 dirt sensor stays on green. Goes on red for about 5 seconds then green. Can clearly see the floor is dirty and it is picking up stuff.
Ahh the good ol electronics on vacuums selling the product again... \015\012\015\012not to worry, your feature is working properly, your vacuum is working fine too. \015\012\015\012Imagine if you will making a circle with your ... Hoover UH70015 Bagless Upright Cyclonic Vacuum
Vacum cleaner appears to be cloddedmit is noit picking dirt from floor
"cloddedmit" means??cont understand your problem sir. sorry.. ... Oreck XL Ultra Bagged Upright Vacuum
Eureka model 5841 Whirlwind Litespeed - Brush is turning, but vacuum will not pick up most of the dirt on the floor. Barely removes anything - any idea what to do?
... Eureka WhirlWind Litespeed 5844 Upright Vacuum
Does not pick up dirt - Roomba Robotic Floor Bagless Vacuum
Is the dirt storage area full?. Does the vacuum motor run? Check the air passages for plugging. ... Roomba Robotic Floor Bagless Vacuum
My Oreck upright is picking up fine, but is very noisy on bare floors. What could be causing this?
FLIP UP SIDE DOWN AND REMOVE COVER AND CLEAN BRUSH,SOMETHING MAY BE WEDGED IN THERE,I HAVE ON TOO.IF YOU NSTILL HAVE YOUR WARRANTHY,THEY WILL TUNE FOR FREE,I KEEP EXTRA BELTS,THEY STRETCH IN TIME.ALSO CHECK TO SEE IF ANYTHING IS BENT,RUBBING ON SOMET ... Oreck XL Ultra Bagged Upright Vacuum