Having problems with your Dyson DC07 Bagless Upright Cyclonic Vacuum ?

Bin flap catch broke, how do i replace it as i often forget and it empties everywhere as the flap wont stay closed .

Answers :

Repair Help & Product Troubleshooting for Dyson DC07 Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Bin flap catch broke, how do i replace it as i often forget and it empties everywhere as the flap wont stay closed .

... Dyson DC07 Bagless Upright Cyclonic Vacuum

Canister problem When I lift the canister off to empty it, the flap at the bottom swings open, depositing 3 dog's worth of hair on my foot! The flap won't stay closed - even after I cleaned off the seal. HELP ME! Please.

Check that the plastic piece isn't broken. I had to replace my canister once because the little detent where the clip holds the base down was bent out of shape. It's too fragile to bend...just replace it. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My Dyson DC14 Animal doesn't have the suction it used to. The piece in the back on the bottom - a flap it appears - stays open now, causing the machine to make a louder noise than usual. At first, if I put my hand on the flap opening it would close, allowing for normal suction. Now, it stays "open" permanently", causing the loss of suction.

Hi its Darran at Dyson.Having had a look at a DC14 here, I am unsure as to the part you are referring to. So that we can help you further, please contact our Helpline free on 0800 298 0298, between the hours of 7am - 10pm, 7 days a week. ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Dyson DC07 bin trapdoor won't stay closed: The small plastic piece on the tip of the center rod on the cylone assembly broke off, so my trap door won't stay closed. Any idea how to find just that part, so I don't have to replace the entire cylone part?

You can buy that part here: Dyson DC07 Spares ... Dyson DC07 Bagless Upright Cyclonic Vacuum

On the DC07, the entire cyclone assembly must be removed to empty the dust, debris, etc. collected when vacuuming. On the top of the cyclone is a "trigger" that you lift with your finger to release the bottom catch, which allows a clear flap to open on the "clear bin," thus letting all the debris fall out. My problem is when you lift the finger trigger, it does not release the catch on the bottom. Since the catch won't release, I cannot remove the entire clear bin either from the cyclone.Any sug

Beofre you go to the extent of buying a replacement canister, you can remove the top and using a straightened coat hanger type thing open that bottom lid. Then maybe you can clean the rim and possibly add some silicone spry to loosen things up. Here' ... Dyson DC07 Bagless Upright Cyclonic Vacuum

My bissell brush band has come off and wont stay on thus the brush will not turn, there is also a black arm type thing on a spring inside (on both sides) on the pump belt side it has broken - the side where the brush belt is, help im searching for parts and a way to fix it but im getting no joy, incidentley the brush belt thickness looks way to thick for the small thickness for the brush belt cog (?) to stay on........am i missing something? so i need to get the arm thing replaced plus find a

... Bissell ProHeat Deep Cleaner Upright Vacuum

The flap that closes when the dirty water tank is full keeps closing as soon as I turn on the cleaner (the tank is empty).

... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Detergent bottle keeps falling off, wont stay put and clean water isn't emptying at all

The tank assembly needs to be replaced. Keep your tank handle. The other problem is your water not dispensing. There are electric solenoids and a pump that control dispensing soap and water. Take it to a repair shop for complete diagnosis before you ... Hoover Vacuums

Sears kenmore 158.321 sewing machine first broke a needle, needle was relpaced, then next needle bent, needle replaced. Now the thread wont catch in the material . it isnt sewing

Make sure you are inserting the needle correctly. The flat side goes on the left and the thread goes from right to left through the needle. ... Vacuums

Oreck xl 9100 bag wont stay on using type cc replaced inside bag hanger

What year model?\015\012\015\012Pre-late 1990s, bag on upright just fit over the adapter in the tube.\015\012\015\012Lat 1990s, went to a version that had a sliding piece of paper to cloe off the bag & prevent spillage, an ... Oreck XL Ultra Bagged Upright Vacuum

How do u close dyson bin base flap as mine wont shut

... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Have dyson dc07 animal. catch that holds the flap closed has broken.Shop suggests I need a new cyclone assembly unit -- cost about £45. Surely there is some cheaper repair?

Hi its Darran at Dyson.Regrettably you will need to buy a relpacement cyclone top of this part has failed. You can buy one direct from Dyson via our website at www.dyson.co.uk at a cost of £31.28. Post and packing is f ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Bottom of dirt container doesn't stay closed

The catch/latch that is on the bottom of the bin button release has likely broken.  \015\012\015\012If you take out the canister (as when you are dumping the bin), and flip it upside down and then squeeze the bin release button, you will s ... Dyson DC07 Bagless Upright Cyclonic Vacuum

My Dirt devil Easy Lite vacuum is picking up but won't pass through tube. It stays in the catch before the tube, whats wrong?

... Dirt Devil Easy Lite Quick Vacuum

I have an eye vac professional that will not stay on to **** up the dirt. There is power to the outlet and the blue on/off light does stay on, but in Auto mode if I stick my hand near the dirt sensor it just pulses on and off. I can feel the suction, but it won't stay on. I've unplugged it, removed the dirt bin and filters and nothing works. Help!!!! This is brand new and I've only emptied the collection bin once and it hasn't worked since.

... Vacuums

Accademia gaggia keeps showing empty grounds drawer and drip tray!!! but it is empty and machine wont work till it knows it has been emptied. how do I solve this?

... Vacuums

I have vax 1800 pet vacuum. It is picking up fine but very noisy. I have replaced the belt in the past and the noise started then. On looking at it closely today I noticed brushbar was getting worn where it slots in at the side so I suspect it wasn't fitted in properly after replacing the belt. Now in properly but still making terrible noise. There is a bit of a rubbing noise when brushbar moved round. Do you think the brushbar needs replaced? How do I lubricate the bearings to try that bef

Spray the end of the brush-bar were the bearings are with WD-40 if that solves the problem replace the bearing when it starts screeching.. ... Vacuums

Just wont fire up it was ok til i stopped to empty the bag now it just wont start

Try and remove and replace the same bag , watch for a switch that the bag may press on as a safety thing so it will not **** in dirt without the bag in ... Vacuums

Our roomba 560 wont charge have replaced the battery Tested the charing unit with another roomba that all seems ok put the uncharged battery into another Roomba but im guessing it now has a memory as this wont charge in the other hoover. Any ideas what may be wrong

Try cleaning the battery contacts with a little rubbing alcohol or contact cleaner on a foam swab, or a bit of paper towel. Take a litle time, it doesn't always dissolve instantly. (Don't use a pink pencil eraser, it would scrub off the plating that ... iRobot Roomba 560 Robotic Vacuum

On my Eureka Model 1759A (from mid-1980s), the plastic catch that holds the two parts of the metal body together has broken. I would like to replace the part of the catch that attaches to the top (the part with the lip on it), but I can't find the part online ... or even a drawing. Where can I get this part ? ? ? HELP ! ! !

This latch is riveted to the body. If you are lucky you may find an old Eureka warranty/ repair center with one on the shelf, or another canister for parts. That will be your best hope. ... Vacuums

My bissell 2x will not sunction anymore. I have only used it~5 times and in the beginning I had to empty 2 in 1 often. What could be the the problem? Also I wipe the bottom often so it will not impede this very important process.

The issue is suction is being lost somewhere. The problem could be in the head where the suction is divided between the hose and the head. Check to see if the switch for that is working. You should be able to see a flapper close when it is on floor ... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum

Electrolux epic series 6000 sr model canister...we put a new bag in machine but it wont turn on and the light is on saying the bag is full and needs to be replaced...we tried the on-off switch several times but it wont turn on...why?

... Electrolux Vacuums

Cant replace dust boxtook it out to empty as my cleaning girl always does and cant replace no matter how i try

May I get the make and model # so I may help you the right way. ... Kenmore Vacuums

Bag full light stays on so my electrolux diplomat lx vacuum wont start i push on/off swtch and light stays on

... Electrolux Lux 5500 Canister Vacuum

I have a new Kenmore magic bued and I am about to change bags for the first time. Trying to do this the clip that is supposed to hod the bag close to the whole keeps coming off when I replace it and close the lid, turn on the vac the sucction is very low and it keeps showing the bag is full which is not true / what is going wrong here ? Thanks so much for supporting, Beba

Sorry to hear that you are having problems with you Kenmore Magic Blue.There is a so-called "bag full indicator", which will only turn red if it got some major blockage. This is the reason why there is no power suction.The "fu ... Kenmore Magic Blue 24195 Bagged Canister Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0802 seconds