Having problems with your Dyson DC07 Bagless Upright Cyclonic Vacuum ?

Dyson DC07 drive belt replacement

\015 How is the belt changed on the Dyson DC07? I don't have to change it yet, but I'm sure the time will come when that will be necessary. I clean whatever areas I can easily get to on the vacuum cleaner frequently, but fortunately have never had anything break down on it yet. I've had it for several years (at least five), and it's the best vacuum cleaner I've ever owned. There must be some easy solution to changing the drive belt. Seems that when I remove the beater cover, I can remove only one side of the beater easily, but not the side that the drive belt goes around. What's the secret to easily remove the beater bar and access the drive gear inside the plastic motor housing? Even if I don't ever have to replace the drive belt, I'd like to be able to remove it so that I can perform additional cleaning inside the motor housing area. Thanks!\015

Answers :

Hi.
\015\012
\015\012The other end of the drive belt the part you cant see goes to a clutch.
\015\012The clutch unit has 2 belts one is clutch to motor the second is clutch to brush roller.
\015\012You obviously look after your machine because you say you have had no problems with belts or clutch for 5 years.
\015\012Both belts & clutch can be worked on but its alot to explain so look at this site for service manuals.
\015\012http://dysonmanuals.llc.nu/
Fiddley yes, but i found that undoing the three screws yep, then ease out both ends of the roller first, then helped with a screwdriver to keep the belt in place i slowly struggled to ease out the old roller. then managed to stretch the belt back over the end and gradually got the new brush back into place. just have to be careful not to push the screwdriver into the belt and damage it. other than that, i couldnt see any other way of changing the brush assembly or accessing the belt partitions.
Repair Help & Product Troubleshooting for Dyson DC07 Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dyson DC07 drive belt replacement


Hi.\015\012\015\012The other end of the drive belt the part you cant see goes to a clutch.\015\012The clutch unit has 2 belts one is clutch to motor the second is clutch to brush roller.\015\012You obviously look after your ma ... Dyson DC07 Bagless Upright Cyclonic Vacuum

How to replace drive belt on a Dyson DCO7 - Dyson DC07 Allergy Blue/Turquoise Bagless Upright Cyclonic Vacuum


... Dyson DC07 Allergy Blue/Turquoise Bagless Upright Cyclonic Vacuum

Dyson DC07 I actually need to locate and replace the brush as it split on one end. Looks like I need to pull the belt off to do that. Might as well replace the belt while I'm at it.


Hi.\015\012\015\012Depending on wether your machine has A clutch fitted will decide how easy this job will be.\015\012\015\012The non clutched model is very simple turn the 3 plastic screws on sole plate to unlock position lif ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Belt replacement Hello, The belt that drives the beater bar on my Dyson DC-07 just broke. Is it that difficult to replace it or should I take it somewhere. Thanks!


It's a fairly simple job. The belt just loops over the end of the beater bar and motor shaft. Need to take the cover off the beater bar housing to get to it. Most difficult part is stretching the belt while putting the beater bar back in the housi ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dyson fan belt fitting. i've lost my manual for my dyson animal dc07 and need to fit a new drive belt. thanks in advance, alan


You can see this on utube video. help ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Replacing clutch drive belt dyson dc14 - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


Chris,\015\012I am just trying to find an owners manual, but I can not find one anywhere. Your link did not work. Can you help with another link? ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

How to replace main drive belt on dyson dc03 - Dyson DCO3 Absolute Bagless Upright Cyclonic Vacuum


... Dyson DCO3 Absolute Bagless Upright Cyclonic Vacuum

Replace belt for dyson upright - Dyson DC07 Bagless Upright Cyclonic Vacuum


DC07s have two belts - one connects the output of the motor to the clutch, the other connects the clutch to the brush bar.I suspect the belt ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Replace belt on dyson animal - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

I need to replace drive belt on dyson dc17 - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


Here is a link to the belt you need and a manual you can view which has instructions: Dyson DC17 Belt and Manual ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

I have a dyson dc07 upright which no longer picks up lent and hair. The roller brush is not spinning when the vacuum is turned on. How can I tell if it is the belt that needs to be replaced or the clutch and belts?


Need replaced Clutch Assy and Brushbar \015\012\015\012Clutch Assy part no:900252-04\015\012\015\012Brushbar Assy part no:904174-01\015\012\015\012try cleaning all Hose\015\012 ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Replace belt on dyson dc07 original


Click the link below for full instructions how to change belt on dc07http://www.youtube.com/watch?v=C83DeJtY6lA ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Replacing belt - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


If you flip the machine over with the beater bar looking upwards. Locate the three/two screw heads and undo with a coin. When the roller section is revealed by taking off the floor head you should replace the belt with a new one and be careful ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Replace Belt on hoover - Dyson DC07 Bagless Upright Cyclonic Vacuum


... Dyson DC07 Bagless Upright Cyclonic Vacuum

Cant figure out how to replace belt - Dyson DC07 Bagless Upright Cyclonic Vacuum


Hi Sylvie,It is fairly simple to change a belt on a vacuum. I'll explain.First, Turn the vacuum upside down with the handle in the locked position. Remove the plate on the bottom. Sometimes it's held on by screws, sometimes by ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Removal of drive belt on dc 07 full kit - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson dc07 The rotating brush on the bottom of my vacuum was filled with strings. I removed the brush by undoing all yellow plastic screws from plate. Removed all strings and replaced as best I could and it was hard to get the brush back in and the belt around it. I dont have my manual but it fits so it should be correct....? Right? No, not true, because when I turn it on and try to and vacuum (by lower canister with foot release) it makes that terrible ratching sound). Please help


The loud ratching is a warning to tell you that there is something stopping the roller bar from rotating this is a very common thing lay the machine on the floor front side down take off the bottom plate and just check the belt is in the centre of th ... Dyson DC07 Bagless Upright Cyclonic Vacuum

How to fit a new drive belt - Dyson DC07 Bagless Upright Cyclonic Vacuum


Hi,\015\012\015\012There are different models of DC07 and the guide below is for the "standard" model. There are some slight variations on different DC07 models, but this should be more or less the same for all of them.\015\012 ... Dyson DC07 Bagless Upright Cyclonic Vacuum

How do i replace the drive belt? - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


Here is a link where you can view the manual which has instructions:Dyson DC14 Manual ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Dc07 belt replacement - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


Here is a video on belt change on DC07 ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

How to replace dyson dc07 brush belt - Vacuums


Hi - You can download the manual by clicking the link underlined in blue below:dyson dc07 ... Vacuums

My older Dyson DC14 (the purple one) early model with a clutch on the beater bar belt needs a clutch replacement. The bar has been cleaned and there are no worn or damaged parts so I conclude that the clutch at the motor end of the belt needs to be replaced. I can find the part online but no instructions on how to disassemble the vacuum to get to and replace it. Dysons only advice is to give me the address and phone of the nearest service center. Can you help me?


Have a look at www.dysonmedic.com which has some very useful info on dismantling and repairing Dysons.\015\012\015\012Although this site doesnt actually cover the DC1 ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Dyson dc07 drive for the beater is not functioning.


Sounds like your clutch has failed it is very common on the dc07 its not an easy job to fit but it can be done if you want to see how its done then youtube fit dyson clutch its a step by step video of how its done good luck ... Vacuums

When selecting the carpet cleaning mode, it appears the belt is slipping (due to the noise) over the drive pulley. How do you access the drive mechanism to replace belt or inspect drive pulley and belt condition?


On those units you must replace the clutch assy. you cant just replace the belt. there is also a special tool used to get the new belts on the brushbar. If you would like me to walk you through this repair let me know. ... Dyson DC07 Bagless Upright Cyclonic Vacuum

How do i replace the belts on dc07 animal


Http://www.sparesaver.com/help-and-support/dyson-section ... Dyson DC07 Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1076 seconds