Having problems with your Dyson DC07 Bagless Upright Cyclonic Vacuum ?

Trigger on my dc07 does not open cylinder flap,what can i do


Answers :

Hi Stephen,
This is a pretty uncommon problem and it is not terribly easy to fix. I suspect Dyson became aware of it and changed the mechanism as I have only seen this issue with Dyson DC07. Basically there is a long plastic rod from the trigger to the bottom flap when you pull on it the latch is released and the flap opens. Your plastic rod has most likely broken. The unfortunate thing is you cannot buy that rod you might have to buy the complete radix assembly. It normally happens that the bottom end breaks off when someone holds the base in place and pulls the trigger.
If this is the case then you may be able to super carefully glue the pieces back together. Watch the video I linked below it shows how to get the radix apart. The tricky part for you is that you will then need to insert a coat hanger or some other slim long thing into the centre and manually push the release which is right at the base of the radix in the middle this will release the flap.
From there see if you can find the broken bit and repair the pieces. Super glue wont hold, you will need araldite or some other super strong compound.
Of course if this sounds like too much trouble just buy a new radix.
To re-assemble you really need 2 people,one with small fingers.It is virtually impossible to fit the bottom of the rod into the base catch without having the flap open.Open the flap by pushing on the base catch with a straightened wire coat hanger.The person with small fingers can then put them either side of the base catch whilst the other person slowly directs the rod which can be eased into place by the person at the bottom.Much quicker and simpler to do than by trial and error-my husbands suggestion!
Repair Help & Product Troubleshooting for Dyson DC07 Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Trigger on my dc07 does not open cylinder flap,what can i do


Hi Stephen, This is a pretty uncommon problem and it is not terribly easy to fix. I suspect Dyson became aware of it and changed the mechanism as I have only seen this issue with ... Dyson DC07 Bagless Upright Cyclonic Vacuum

On the DC07, the entire cyclone assembly must be removed to empty the dust, debris, etc. collected when vacuuming. On the top of the cyclone is a "trigger" that you lift with your finger to release the bottom catch, which allows a clear flap to open on the "clear bin," thus letting all the debris fall out. My problem is when you lift the finger trigger, it does not release the catch on the bottom. Since the catch won't release, I cannot remove the entire clear bin either from the cyclone.Any sug


Beofre you go to the extent of buying a replacement canister, you can remove the top and using a straightened coat hanger type thing open that bottom lid. Then maybe you can clean the rim and possibly add some silicone spry to loosen things up. Here' ... Dyson DC07 Bagless Upright Cyclonic Vacuum

On the dc07 Animal ,when the release trigger is pulled to allow the rubbish to fall out of the bottom of the shroud the flap does not open being jammed shut


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Not picking up as well as should be...dyson dc07.... From bottom of powerhead in area of outer clutch actuator the round opening for suction is only open halfway, when I move the outer clutch actuator


... Vacuums

Emptying cylinder Have just acquired Dyson DC07 Bagless Upright Cyclonic Vacuum without instructions. How do I remove the cylinder to empty it?


I hope you've found out by now, but, in case you haven't, the latch to remove the canister is right by the handle on top of it, just don't lift until you release the latch with your thumb, it's got a safety to keep you from hitting the release when y ... Dyson DC07 Bagless Upright Cyclonic Vacuum

I got my bissell for $7.50 from a thrift store, if you can believe THAT. Used it for the first time today after reading the manual online first. After filling the clean water bladder full of hot water and setting everything up the way I wanted, proceeded to turn things on and go for it. Well, the water/solution just kept coming and coming, without my finger on the trigger. Obviously something is jammed in the open position but where? The trigger moves freely.


This is the answer I got from Bissell:Please\015\012check the gasket at the bottom of the tank to ensure it is attached and\015\012not lodged in the reservoir of the machine. If this is not the problem,\015\012take the machine for i ... Bissell 8910 ProHeat Clear View Upright Vacuum

Dyson Dc07 trigger will not release - Dyson DC07 Bagless Upright Cyclonic Vacuum


... Dyson DC07 Bagless Upright Cyclonic Vacuum

How do I open my dyson cylinder - Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum


Hi its Darran at Dyson.If you are referring to the cyclone top and bin assembly, once removed from the machine, there is a button at the base of the handle that has Dyson written on it that you press and pull the cyclone top and bin apart ... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

Hoover steamvac trigger valve is stuck open. water


... Hoover U8147-900 WindTunnel V2 Bagless Upright Cyclonic Vacuum

Dyson DC07 bin falls open


You can replace the lid ... Vacuums

My dyson dc07 dust collector bin won't open


... Dyson DC07 Bagless Upright Cyclonic Vacuum

I HAVE A DYSON DC07 PINK VACCUM -DON'T KNOW HOW TO OPEN BOTTOM TO RELEASE THE DIRT??


... Dyson DC07 upright vacuum - pink

How do i open to emty - Dyson DC07 Bagless Upright Cyclonic Vacuum


Go to this site and it will allow you to save the user manual it downloads in PDF format.\015\012\015\012On page 6 I believe it shows how to empty and clean out.\015\012\015\012 ... Dyson DC07 Bagless Upright Cyclonic Vacuum

How to open up the wand - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Lift up the red circular slotted tab and pull up on the large red knob-looking hose end. when you pull it up it will extend and then you can pull the whole arm off to use it. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Can't open it to empty - Dyson DC07 Bagless Upright Cyclonic Vacuum


Hi is this because you dont know how to do it or is it because you know how but its not working? ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson dc07 cant open trapdoor ?????


Might be clogged with dirt, take the canister to the trash bin, pull the trigger and try pulling it open from the bottom at the same time, there is also a way to remove the top of the canister where the handle is from the bottom clear canister part b ... Dyson DCO7 Animal Bagless Upright Cyclonic Vacuum

I want to open a Hoover S3825 Elite Cyclonic Vacuum to see if I can repair or replace the cord reel assembly. Currently the reel slowly draws the cord back into the canister once it is pulled out. I found the mounting screws under the rear wheels once I removed the hub but I do not know how to remove the rear wheels, everything is plastic. The front screws are under the front caster wheels and I think I need to take a screwdriver and pry off the little cylinder wheel to get to them by rotating


... Vacuums

I have a Dyson DC07 when you un attach cylinder for emptying all what i have hoovered falls out on the floor what do i need to buy to fix it


It may need a new bin flap ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

How do you remove a motor from a dc07, I have it out but can't open it to disconnect and check it out?


Go to www.dysonmedic.com and you'll find an excellent fully illustrated guide. I have nothing to do with the site, but I refer to it often. I hope you find it as helpful as I do! ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson DC07 Clear Bin Flap will not release


Important thing is that in order to get the rod in the hole, you have to squeeze the trigger while you are trying to do it. Squeezing trigger makes rod longer. All fixed! ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Can't open trash bin - Dyson DC07 Bagless Upright Cyclonic Vacuum


Call dyson customer care \012\0121-866-693-9766 ... Dyson DC07 Bagless Upright Cyclonic Vacuum

I can not open my dyson canister to empty it - Dyson DC07 Bagless Upright Cyclonic Vacuum


If you take the bin off of the unit and try to pull the release trigger and it feel vry lose then you will find that the connector rod inside the cyclone has broken you will need to replace the cyclone unit as the rod comes complete with the cyclone ... Dyson DC07 Bagless Upright Cyclonic Vacuum

I have a bissell spotbot. The trigger on the spay head sticks open when pressed. It will not shut off. HOw can it be fixed?


If it comes apart, see if cleaning will help. other then that you will have to replace the hose asm. part #2036665 . ... Vacuums

Can't open to dump put the dirt its like the trigger won't fully release


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Hi, im hoovering my mothers house whilst she is away, using a vitesse pet lover, but now the cylinder is full and i can work out how to open it so i can empty it. thanks


Lift the catch where the canister lid joins the handle, then pull the whole assembly away from the handle.  Take the assembly to wherever you want to empty it, then press the button at the bottom front of the canister.  The bottom swings do ... Electrolux Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0236 seconds