Having problems with your Dyson DC07 Bagless Upright Cyclonic Vacuum ?
HOW DO I KNOW WHATS WRONG WITH IT
\015 IT JUST STOPED\015
Repair Help & Product Troubleshooting for Dyson DC07 Bagless Upright Cyclonic Vacuum
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
My roomba will not go forward. it will turn in a circle for a few seconds then shut off with the red light flashing. i cleaned the brushes and the wheels. i dont know whats wrong with it.
... iRobot Roomba 530 Robotic Vacuum
HOW DO I KNOW WHATS WRONG WITH IT
... Dyson DC07 Bagless Upright Cyclonic Vacuum
I bought the Eureka 4703D model vacuum and my very first time powering it on, it was extremely loud - abnormally loud, and I don't know if it is loud like that because I possibly put it together wrong, or there is something wrong with it or it was previously damaged and I would like to know if this is something I can fix myself or do I have to take it back apart and return it to Walmart where I purchased it from. When it makes the loud noise, it does vacuum fine but the noise is just unbearable
... Eureka Power Plus 4703D Bagless Upright Vacuum
Kirby Sentria I bought my kirby sentria just before we were to move house and although I have the instructions somewhere, they will be boxed up and I so want to clean the carpets before I move. Problem is that I don't know whether the belt should be on or off when using the big silver front with the Kirby insignia on it. I know that the green light should come on when it is working properly and it does not, so I am doing something wrong. I can attach the attachments no problem but I want to use
If the green light is off, then its time to replace the band. This video shows you how. ... Kirby Ultimate G Bagged Upright Vacuum
The belt is intact but the aggitator doesn't spin anymore. Had a horrible rubber smell, went to change belt. Not the problem. Anyone know what could be wrong? Dirt Devil bagless w/dirt indicator
It could also be a bearing problem in the roller brush. Take the belt\015\012off of the roller brush and see if the brush spins freely, if not, remove the\015\012roller brush and check both ends to see if one end is stuck. If so you ... Vacuums
Hi my hoover is blowing air rather then **** it, I don't know whats the problem...please help me
Hello,You probably have a blockage between the roller brush and the body of the machine. You won't have any suction to pull dirt into the bag. The dirt will fall back onto the roller brush and out the front of the machine.I hope thi ... Vacuums
I need assistance infiguring out whats wrong with my hampton bay ceiling fan i believe its the romote for the 2 stage lights and 3 stage fan the lower light will flash on and off only i cha nged the battery and stiii will not function model no on remote is o;UC7080T THANK YOU PHIL HILLEN @ [email protected]
Hi phil,I think the battery you inserted are not in a good working condition since it was working well before you changed the battery,I will suggest you replace the batteries,if the problem persists then its obvious the problem is from the remo ... Vacuums
Motor still runs--sounds like jet engine. do I need a new motor? or is there some sort of muffler that has malfunctioned? vacuum belongs to disabled mom---so trying to do work ourselves--cant afford much. dont see anything obviously wrong--but know nothing about electric motors.
This little vac I think is actually made by Samsung. If it is ROARING and vibrating, either the bearings or suction fan is in bad shape. Remove the lid as if to inspect the belt and see if there is a visible intake opening with a plastic fan rotatin ... Bissell 3590 CleanView Bagless Upright Vacuum
I heard that a class action lawsuit against Oreck Vacuum is being started because of all the problems customers are having with their vacuums. Does anyone know about this? My Oreck is only a couple of years old and keeps burning up belts. I took it in after only one week of usage when I started to notice white smoke coming out of it and the smell of burning rubber. I feel like I got the old run-around, when the service tech told me he couldn't find anything wrong (but replaced the burned up belt
You are correct about the fact that legal action has been taken. Go to this link to read more\015\012\015\012 ... Oreck XL2200 Bagged Upright Vacuum
DYSON DC17 ABOUT 4 YEARS OLD. I HAVE TWO FILTERS THAT I ALTERNATE BECAUSE AFTER 2 HOURS OF VACUUMING I LOSE SUCTION. I HAVE TO WAIT 3 DAYS FOR MY FILTER TO DRY BEFORE I CAN SWITCH THEM AGAIN. THE FIRST TWO YEARS I HAD THE DYSON I COULD GO A COUPLE MONTHS BEFORE CHANGING THE FILTER. WHATS WRONG?
Hi there! This is John from Jerry's Vacuum Sales in Modesto Ca. Are you using any type of carpet fresh product on your carpet? If so the fine powder is leaking onto the filters and causing them to clog. Discontinue use and over time the problem will ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum
I replaced the clutch in the dyson dc14. it isnt making that terrible noise anymore....thank god!! but the roller brush is not moving when the vacuum is in use. whats wrong?
The "horrible noise" you were hearing before wasn't the clutch! It was the roller brush. If the brush is not turning, all you are doing is burning out your new clutch. Reasons for the brush not turning: there is hair, carpet fiber or other matter wra ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum
Just bought a new Eureka Optima and it smells really bad when I run it. I don't know if it's just a "new" smell or if there is something wrong with it.
... Eureka 431A Optima Bagless Upright Vacuum
The red light is flashing and then there is a four note tune that plays - I don't know what is wrong with it - I cleaned the brushes and it still does it
I bet you have a roomba? if so you probably need to replace the battery, reset the unit, then charge for 16 hours straight, go to roomba dot com the site is very helpful, Don the Vacuum Doctor Alb,N.M. ... Vacuums
The Belt on my Dirt Devil broke...so I purchased another belt and as soon as i put it on and started to vacuum it also broke, i noticed that the metal piece the belt goes on was extremely hot and was melting the belt. Whats wrong with it?
It may be that the beater brush is bound up . This will cause slipping, of the belt. Take out the brush and clean out the bushing . Hair gets wound up in side. once you have it cleand out. Put a few drops of cooking oil in side the bushing on both e ... Dirt Devil& Breeze Vision Canister Vacuum Vacuum
My vac. pet attachment exploded in my hand! I have talked to a debbie on the phone for a pick up of this machine, but I want to know whats going on with this certain machine! because it hurt the palm of my hand under my right thumb bad and I need someone to get back with me today!!!!!! SHERRI ADKINS P.O. BOX 1502 CHAPMANVILLE W.V. 25508 HOME #304-855-8868 CELL#304-784-6456
... Dirt Devil Vacuums
My steam mop turns on but it wont steam anymore whats wrong with it?
I just had this problem after owning the mop for about a year. I let it stand for a while in a bucket of vinegar, then tried it again and it worked. I think it had gotten clogged with hard water deposits and the vinegar dissolved them. I'm buying ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum
D.d vaccum i have a dirt devil dynamite...i bought a new for it i put it on and not even 1 minute of using it the belt broke again!!!!i dont know whats going on do i have 2 put it on a certain way does it need grease or what!
Did you check the brush roll, if the ends aren't turning freely, then it needs to be replaced also. ... Dirt Devil M084600 Dynamite Bagless Upright Vacuum
My bissle proheat pet 2x is not sucking up water but has in the past do you know what might be wrong with it???
... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum
Belt type Ok, thank you for the help! I did have the top off, but did not know the taking the motor loose trick, thank you for that! Now I have a couple of more questions, and thank you so much for all of the help! I got a belt from sears, & the sales guy sold me an off brand belt. It looks just like the belt that broke, although do you have to force the motor back down into place? I think it may be the wrong belt? I have looked on the Hoover website & they do not even have parts listed fo
The belt number is 91001028. The belt will be snug but not real tight, so the belt you got may not be the right one. Most repair shops for vacuums should have this belt in stock. ... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum
I have a dirt devil (ultra vision) it will not pick up anything i dont know what is wrong. It will not pick up dirt through the pipes no pressure in the pipes
Will try to help here.. first off.. regardless of the brand..upright vacs operate pretty much the same way.. I assume that when you plug it in and start it that the motor runs as well as the beater brush on the base.. from the sound of your symptoms ... Dirt Devil Vacuums
My hoover belt keeps burning when i replace it. i dont have the manual so i dont know what im doing wrong.
Probably when you close it back together, there is a piece rubbing against that you do not see right away but could maybe hear it. ... Hoover Vacuums
Intele Clean It is constantly in the red. I changed my bag and still its in the red I vacumed in one spot for 20 min, Whats Wrong?
Every time you change the bag you should clean the eye. The eye\015\012is inside the tube behind the bag collar. Just use a lint free\015\012cloth and wipe all around inside the tube. That worked for me! ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum
I have a kenmore grab n go bagless and I need to know the exact size of the belt, I lost the manual, and I have burn several belts at the bigining of the problem the motor stops and burn the belts I open it and I think it was a little piece of plastic, that cause the problem, but when I put the new belt it looks like the motor works fine,but still burn the belt, I'm using UB-1 #5275 belt am I using the wrong one?
... Kenmore 34722 Grab-N-Go Upright Vacuum
II have the kirby sentria, i have it in canister mode with blower attachment on the hose is on with the hand sprayer attachment the problem is the foam is not coming out the sprayer used it just fine all day went to refill w/ water and cleaner now the foam wont come out whats wrong with it?
Make sure the "straw" is in.See if dust coming out of the hose did not clog the air passages. ... Kirby Heritage II Vacuum
My Carpet cleaner, Bissell pro heat will release the water but will not **** it back into the the bas. Whats wrong with it
Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum