Having problems with your Dyson DC07 Bagless Upright Cyclonic Vacuum ?

DYSON WONT PICK UP

\015 THE HOSE HAS TONS OF SUCTION AT THE TOP, I EMPTIED THE SPINDLE AND CLEANED ALL DUST, BUT WHEN UPRIGHT NOTHING PICKS UP\015

Answers :

It sounds like there's something wrong with the changeover valve. This determines whether the airflow is directed to the cleanerhead or the wand and I think also provides the resistance to keep it upright. It's the bit above the right wheel as you stand behind it so try taking the inspection cover out and have a close look in that are for something wrong.
Repair Help & Product Troubleshooting for Dyson DC07 Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My dyson ball wont pick up


You may have a blockage in the machine or the internal hose has become dislodged. Call the Dyson helpline for a thorough troubleshoot and solution. ... Dyson DC07 Bagless Upright Cyclonic Vacuum

My dyson dco4 wont pick up when upright


Check the internal pipe underneath is not split ... Dyson DC07 Bagless Upright Cyclonic Vacuum

My hose tools wont pick up. when hose tools unattached suction is fine and will **** my hand fiercely, but once tool attached no suction..... how am i gonna pick up cat hair from seats now?! its a dyson DC04 but it wouldnt let me choose that!


I have a DC04 and the hose tools are a open hole.The only reason they want pick up is they are blocked.If you say they are sucking your hand when not attached.Make sure the hose is not blocked by taking off the cover at the front.Allso check the cyli ... Dyson DC07 Allergy Blue/Turquoise Bagless Upright Cyclonic Vacuum

Dyson dc33 wont pick up. - Dyson DC33 Bagged Upright Vacuum


... Dyson DC33 Bagged Upright Vacuum

Dyson dc27 wont pick up


... Dyson DC27 Bagless Upright Vacuum

DYSON WONT PICK UP


It sounds like there's something wrong with the changeover valve. This determines whether the airflow is directed to the cleanerhead or the wand and I think also provides the resistance to keep it upright. It's the bit above the right wheel as you st ... Dyson DC07 Bagless Upright Cyclonic Vacuum

My dc24 wont pick up - Dyson Ball DC24 Bagless Upright Vacuum


Hi Leta,I'm sorry to hear you're having difficulty with your DC24. If your machine doesn't seem to be picking up as well as usual, please follow the steps shown in our online Support guide to identify any issues: ... Dyson Ball DC24 Bagless Upright Vacuum

Hard to push wont pick up - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi David,I'm sorry to hear you're having difficulties with your DC07. If the machine doesn't seem to be picking up as well as usual, there may be a blockage in the machine - the filter may also need a wash.To locate and remove any blo ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson DC 24 pick up head wont spin


- Look for the reset button on the side of the brushbar housing - there should be a red sticker and a red button. Push it once. It's \015\012not gonna stay depressed, it's gonna pop right out - that's normal.\015\012- Step on the red peda ... Dyson Ball DC24 Bagless Upright Vacuum

The hollow tube underneath my dyson dc04 keeps coming out of position and it wont pick up. Should it be fastened into place with something.


It is suppose to swivel some. That is why it is not fastened in with a screw. It sounds like to plastic molding that was suppose to hold it in place has worn down. You will need to replaced that part. ... Dyson Vacuums

My dyson ball Vaccuum wont pick anything up - Vacuums


... Vacuums

Dyson dc04 wont pick up,motor working,replaced clutch assembly but still dosnt turn brushes


You need to go through a process of elimination. You are better doing that here: Dyson advice forums ... Dyson DC07 Bagless Upright Cyclonic Vacuum

My dyson seems to have lost its suction therefore is not picking up anything yet i have found that when my dyson is standing upright it has a little more suction but nothing like how it use to work. This has only happend in the last 2 weeks. I sanded a floor & though the sander picked up majority of the dust i did use the dyson to pick up the excess and it is since then that my dyson has not been working to its full potential.


Hi there,\015\012\015\012Sorry to hear you're having a problem with your DC07. You should be able to resolve the issue by following these simple steps: ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Wont pick-up wont pick up from bottom


... Hoover U8126-900 Wind Tunnel Dual V Bagless Upright Vacuum

My Dyson Animal is not picking up very well in the drive position. With the hose the pick up is still very good. I have had it for 2 yrs now with very little problems. I have cleaned out all areas etc pipes, the brush underneath and cant find any blockages. The noise of the dyson is the same as usual. Could you tell me if there is a part that it sounds like it needs?


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Poor Suction Heya! So I just picked up a used Dyson, but when I vacuum with it, the suction is pretty weak and it spits all kinds of stuff out the back and into my feet. When I pull the hose I have good suction, but in regular mode it hardly picks up anything. The brushes are spinning, and it eventually will clean an area if I go over it again and again. Maybe a clog somewhere? Please tell me that Dysons have better suction than my $50 Dirt Devil! Thanks!


I recently bought a second hand Dyson DC07. Its suction was poor. I removed all the un-clipable pipe bits and to remove any blockage but it all looked clear. The Final Sponge and hepper filter did have a lot of dust in it and the rotating brush was f ... Dyson DC07 Bagless Upright Cyclonic Vacuum

I have an eureka power line 12 amp and it wont pick up i have plenty of suction with in the hose but it wont pick up i checked the belt and that is fine


... Eureka Vacuums

I have a george wet and dry (A26A), it wont pick up any water. the tube which goes from th lid into the water wont pick up water?


... Vacuums

Dyson DC25 is barely picking up, but what it is picking up is not going into the cannister,


Your problem is posted in the wrong category, so probably no-one reading here (Telescopes and Binoculars etc) will have the solution. I do know that Dyson maintains Tech Advice lines worldwide. Look here ... Dyson DC25 Ball All-Floors Upright Vacuum Cleaner

Wont pick up dirt it will only pick up when i use the hose if i use the upright it dont pick anything up and dust flys out so whats up


... Eureka 5856BVZ Boss Bagless Upright Cyclonic Vacuum

My Dyson DC17 has lost suction on the wand and is not picking up dirt as it should. I have taken the small part at bottom of the machine off to see if there is a blockage--none that I can see. The flexible tube on wand is very tight and won't extend very much. Dyson sent me a new cyclonic part in April but the machine still doesn't seem to be working properly. My serial number is 260-us-d11545. Is there somewhere I can take my Dyson to get it fixed. I'm very frustrated with it. Thank you.


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dyson won't pick up heavier particles -


Check the hose line from the base to inlet of the canister, there may be a blockage, like hair or plastic (i had a lego block and hair)\015\012\015\012clear obstruction, and check the belt. \015\012hope this works ! ... Dyson DC07 Bagless Upright Cyclonic Vacuum

I have the bissell pet vacuum and it wont **** up anything I cleaned everything and it still wont pick up


It could be the belt. It the belt is worn or stretched it won't pick up the way it should. I would try changing the belt if you haven't recently. You can get the belts you need and the manual here: ... Bissell 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum

My Dyson Animal does not pick up on bare floors. It makes my wife crazy. I have checked the airways, etc. While the container fills up on carpet, I often see stuff on the carpet that it doesn't pick up, etc.


Check bottom Hose for Splits, Brush bar may be worn or set too high. check rubber seals. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My dyson will not pick up from the floor. it will pick up from the extension wand but not off of the floor where the main vacuuming is done


Usually this is from a clogged pipe in the vacuum and filters need to be cleaned. Most vacuums need a phillips screwdriver or a torks driver. Looks like a star. Underneath the vacuum where the rolling brush is at, remove the srews to access the the r ... Dyson DC14 Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0376 seconds