Having problems with your Dyson DC07 Bagless Upright Cyclonic Vacuum ?

Cant get the bottom lid of dyson dc7 dirt bin to open


Answers :

Hi there,

I am sorry to hear you are having difficulty opening your clear bin. The mechanism that releases the bin base is actually part of your cyclone assembly. When you pull the trigger, a small clip at the bottom of your cyclone releases the bin base. If this clip is missing or broken, part replacement may be needed to resolve the issue.

You can call us directly to order the the cyclone assembly at 0800 298 0298 (UK) or 1-866-693-9766 (US). The part is also available on our website.

Best wishes,

Jessica
Repair Help & Product Troubleshooting for Dyson DC07 Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Cant get the bottom lid of dyson dc7 dirt bin to open


Hi there,I am sorry to hear you are having difficulty opening your clear bin. The mechanism that releases the bin base is actually part of your cyclone assembly. When you pull the trigger, a small clip at the bottom of your cyclone releases t ... Dyson DC07 Bagless Upright Cyclonic Vacuum

I HAVE A DYSON DC07 PINK VACCUM -DON'T KNOW HOW TO OPEN BOTTOM TO RELEASE THE DIRT??


... Dyson DC07 upright vacuum - pink

I have a Dyson Animal upright (purple). I took it apart to clean the cyclone chambers. When re-assembling the bottom closed before the opening rod was inserted. I can't get the opening rod installed with the bottom opening closed. How do I open it? Thanks.


I looked in our DC07. I would try removing the top again and getting a long dowel or the opening rod, insert it down into the unit and PUSH. The opening rod opens the latch by pushing it, not pulling it. Here are some pictures of the latch. Top pi ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My Dyson DC17 has lost suction on the wand and is not picking up dirt as it should. I have taken the small part at bottom of the machine off to see if there is a blockage--none that I can see. The flexible tube on wand is very tight and won't extend very much. Dyson sent me a new cyclonic part in April but the machine still doesn't seem to be working properly. My serial number is 260-us-d11545. Is there somewhere I can take my Dyson to get it fixed. I'm very frustrated with it. Thank you.


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

I have a handheld steam cleaner model mc1220 and i cant get the lid open .what can i do to get it to open.thank you.


... McCulloch MC1275 Steam Vacuum

I cleaned it out but it still wont **** into the dirt container it all ends up getting cloged in the opening on the bottom


Double check the elbow at the base on the right hand side (back facing you) of the vacuum for clogging. \015\012\015\012Many times it will appear free but be packed solid at the elbow just out of sight, there should be a screw on lower ri ... Bissell 6594 PowerForce Bagless Upright Vacuum

Dyson Vacume clogged up and stopped working cant get it open


Hi.\015\012\015\012What model number dysons are you asking help for ?\015\012\015\012http://dysonmanuals.inc.io/\015\012\015\012Chris. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

I have an old Hoky Omni carpet sweeper. I took it apart to clean the inside. Now I cannot figure out how to get it reassembled.(specifically the two buttons that open the bottom to discard the dirt, and two small wires that go somewhere)


... Hoky Vacuums

Cant get the bottom plate back onto my dyson upright DCO7i


You need to press hard and turn till they lock inhttp://www.youtube.com/watch?v=fN8k--LbuCs ... Vacuums

I cleaned it out but it still wont **** into the dirt container it all ends up getting cloged in the opening on the bottom


... Bissell 6594 PowerForce Bagless Upright Vacuum

I don't know how to open the bottom to release dirt


You can get an owners manual here: Dyson DC17 user guide and owners manual ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

The belt wont turn...i cant get in to the inside to check to see if the belt isnt on the roller...how do i get up in there..i took the bottom plate off and you still cant get inside... thx Peggy


The following site has some great info on your machine:\015\012\015\012www.dysonmedic.com ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

I have a Dyson DC-17 and the top of the cyclone has hair and other debris jammed in the ports. It has 6 six screws holding the parts together and I can only get access to 4 of the screws. The bottom piece appears to be removable, but I can't figure out how to remove it without damaging it. If I can get this piece off, then I have access to the other 2 screws. Can you tell me how to remove the bottom piece? Thanks in advance.


The instructions on how to dis-assemble your DC-17 are somewhat lengthy and it is quite helpful to have pictures and videos handy while you are doing it. Normally I would give the instructions here, but due to the amount of info that is necessary to ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Hoover Mach 6 U5198-900 vacuum roller brush won't turn. I had opened the bottom to clean hair off the roller. the belts are not broken. When I closed it and turned it on, now the roller brush won't turn. I can push and turn it by hand, but not easily. Then I noticed the brush on/off switch is turned off, but when I step on it, it won't turn on. I was thinking I let something get out of place when I opened the bottom, but can't see what.


... Hoover Tempo Widepath Upright Vacuum - Blue

How do i take the old belt off of my dyson dc 14? cant seem to figure out how to get the roller separated from the machine because i cant get the old belt off.


Go to: Dyson web site or \015\012\015\012 http://www.repairclinic.com/0100_24.asp\015\012\015\012There should be 4 to six screws holding the ... Vacuums

The bin lid is broken on my dyson dc07, I have ordered a new lid but can't get the old one off, not sure how to remove the old hinges without snapping the hinge for the new lid to go into, any ideas?


Easy watch this video ... Vacuums

My Dyson DC14 Animal doesn't have the suction it used to. The piece in the back on the bottom - a flap it appears - stays open now, causing the machine to make a louder noise than usual. At first, if I put my hand on the flap opening it would close, allowing for normal suction. Now, it stays "open" permanently", causing the loss of suction.


Hi its Darran at Dyson.Having had a look at a DC14 here, I am unsure as to the part you are referring to. So that we can help you further, please contact our Helpline free on 0800 298 0298, between the hours of 7am - 10pm, 7 days a week. ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Dyson DC7 wire gets hot


Hi.\015\012\015\012Definately yes & ASAP. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

I can't get the top lid off my dyson dc17. It's


You need to get a long handled t-15 driver or a t-15 bit and a bit holder and extension for a 1/4" drive socket set (12" or longer extension) to get this apart. There are only something like 6 pcs in there and once you get it apart, cleaning it is v ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

I can't get the top lid off my dyson dc17. It's


Hi its Darran at Dyson.Try following our online help at www.dyson.com/support, if this does not help, please contact our Helpline on 1866MYDYSON.Kind regardsDarran Dyson Customer Service ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Why does my dyson dc04 work for about 5 mins then cut out the wire on my dyson 04 needs replacin but i cant get the casing off. My DC04 cuts out after abou 5 minutes use. I think there may be a thermal cut-out somewhere?


Thermal cut out in coils of motor,you have not been keeping filers clea,I THINK.\015\012motor is avaliable ... Vacuums

I HAVE TRYED TO CHANGE THE CODE BUT NOW i CANT OPEN THE SAFE, HOW CAN i GET IT OPEN?? how can I reset a medalist electronic digital safe?


I tried to search for the manual or guide of your Medalist Electronic Digital Safe but I cannot find any. Most electronic digital safe has a small rubber hole plug either near the keypad or at the bottom of the door. Check your safe and s ... Vacuums

How do I clean the dirt from inside the vacuum cleaner, brand name panasonic mce6003. I bought it without the manual and I cant get the dirt out from inside it since it is bagless. Please help :-(


... Panasonic MC-UG371 PLATINUM LINE Bagged Upright Vacuum

I have a Neotec XJ-2000 ionic air purifier. On the bottom of the device, it says I should open the casing and take out and clean the dust filter every month. I haven't done it in years and no longer have the manual. How do I open it up to get the dust filter out?


... Vacuums

Dyson My dyson stopped working, and now I cant get it to come on at all, I have cleaned everything.


Proberly fauly cable ,switch,or motor req,all parts can be supplied ... Dyson DC07 Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0893 seconds