Having problems with your Dyson DC07 Bagless Upright Cyclonic Vacuum ?

Spitting Out Debris

\015 My Dyson dc07 is picking up dirt - you can see it in the cannister - but it's spitting out crumbs, rice, etc back onto the rug. I can feel it hit my feet. So it's not doing a great job, just moving the crumbs around. I've cleaned the filter, wiped the inside, and my husband has checked for blockages - and the brush is spinning - any other ideas?\015

Answers :

The beater bar (rotating brush) can kick back crumbs if the suction is not at 100%. This can happen if the vacuum has been used for a number of months without a thorough cleaning.\015\012
\015\012First thing is to not let the dirt canister get too full. The more full it is, the more dirt is sucked into the "cyclones" which are meant for only fine particles, not big pieces of dirt.
\015\012
\015\012I'd then check your elbow hose connections (the ones that snap out easily). Then check the Hepa filter. When I lost suction with my Dyson DC07 the Hepa filter was a mess. But the inner cannister seemed to be really dirty also, so I dismantled it (this will void the warranty) and washed it out under the kitchen sink. Do not try this unless you know exactly what you're doing, but mine was an extreme case, as the Dyson was used by family members for about three years and they probably never cleaned the Hepa filter, etc.\015\012
\015\012Now I'll at least wash the Hepa filter (and housing) twice a year, as Dyson recommends.
The hose from brush go to the bag need to check for blockage you have to open there hose to clean
Repair Help & Product Troubleshooting for Dyson DC07 Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Vacuum picks up some dirt and debris but not all, and spits some back out?


Some blockage at the pickup or in the hose if it uses one---dirt etc being kicked back out is a clear sign of this----if it has a tube check that first, and if a head with turning brush do not miss looking for a blockage there. ... Eureka True Clean Upright Vacuum (Yellow) 2961BVZ

While vacuuming, debris spits out the back.


That's normal. try lowering the heght adjustment ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

Spitting Out Debris


The beater bar (rotating brush) can kick back crumbs if the suction is not at 100%. This can happen if the vacuum has been used for a number of months without a thorough cleaning.\015\012\015\012First thing is to not let the dirt canister get t ... Dyson DC07 Bagless Upright Cyclonic Vacuum

My dyson dc25 KEEPS 'Spitting' BACK out what I just vaccumed, leaving a trail of debris, Fix it


... Dyson DC25 All Floors Bagless Upright Vacuum

Vacuum I have a dirt devel purpose for pets vacuum. It has worked well previously. The vacuum has started spitting out debris from the bottom when slightly lifting from one floor to the next. What could be causing this. Thank you


You may have a clog in the dirt inlet by the brush roll, and also the hose. ... Vacuums

The belt is working but it is spitting debris back out and not vaccumming it up


... Hoover U5262-900 / U5260-900 / U5266-900 / U5268-900 EmPower Bagless Upright Vacuum

The carpet cleaning portion of the vacuum sucks debris up poorly, and during the whole time I have it on carpet, the hose continues to have strong suction. The vacuum also spits out what its vacuumed up.


The screws along the base of the vacuum must be removed . The vacuum cleaner cover must then be removed exposing the suctioning hose syphoning the debris from brush roll area. Pull the hose from the brush roll area letting it hang freely. Remov ... Vacuums

Vacuum is spitting dirt and debris out the back--what can I do?


The first thing you should do is clean out the container then check the filter if it looks dirty with a lot of dust it probably needs replacing.check the hoes for dirt that might stick up.if the problem continues it needs a service. ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

EUREKA Bagless altima shooting out debris and not picking it up


Did u clean the filter? if u get a new one i would suggest a kirby. bu get a self-propelled model. THEY LAST FOREVER!!! ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

My Hoover SteamVac is spitting out dirty soultion from the recovery tank, it seems. I have removed the clean solution tank and turned it on to **** up what was soaked into my carpet and it just kept spitting out slowly. When I first turn it on, it spits out a tremendous amount. What could be causing it to spit out solution?


... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Vacuum spits dirt out of the back end as I'm vacuuming.


Heather,Does the vacuum have a switch or a lever somewhere that makes it change from floor to hose? If so, it sounds like you've been using it on the hose selection but not actually sweeping using the hose. In other words, on an upright vacuum when s ... Vacuums

Eureka Altima Spitting dirt back out


Your intake is clogged at the bottom and your filters are dirty not letting it create suction.is the dirt cup full ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

My filter queen just had the motor rebuilt last year and was basically a brand new unit when I got it back. It is not picking anything up now when I vacuum. The beater bar on the carpet attachment is turning fine and when I take all the attachments off the hose I can feel the suction being created like it should be picking up debris just fine. I have emptied the canister even when it did not have much in it; however, it still will not pick anything up off the carpet. It picks up debris tempo


It sounds as if you have a clog inside the "Power Nozzel". They mention that there are "no user serviceable parts within the Majestic® Power Nozzle" My advice would be to see if you can see a clog with in reachable distance and try to remove the ... Filter Queen Vacuums

My bissell steam cleaner spits out the water from the bladder but does not spit out the shampoo.


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Model UH60010, Series X12.0, Mfg code K09A. While attempting to use the hose and the extensions to clean shelves, my wife reported no suction. I removed the brush roller and the plastic piece just below where the hose opening is located and saw a "flapper" door that was closed and had some debris sort of jamming it. I removed the debris, but the door requires extreme pressure to open to permit the dirt, etc to moved up thru the opening , through the hose, etc. I thught maybe that somehow tg


Hello,Check to make sure\015\012the dirt canister is empty. If dirt canister is full, then you will \015\012experience\015\012reduced suction. Empty dirt receptacle.\015\012 Could\015\012 be a clogged hose - ... Vacuums

On the DC07, the entire cyclone assembly must be removed to empty the dust, debris, etc. collected when vacuuming. On the top of the cyclone is a "trigger" that you lift with your finger to release the bottom catch, which allows a clear flap to open on the "clear bin," thus letting all the debris fall out. My problem is when you lift the finger trigger, it does not release the catch on the bottom. Since the catch won't release, I cannot remove the entire clear bin either from the cyclone.Any sug


Beofre you go to the extent of buying a replacement canister, you can remove the top and using a straightened coat hanger type thing open that bottom lid. Then maybe you can clean the rim and possibly add some silicone spry to loosen things up. Here' ... Dyson DC07 Bagless Upright Cyclonic Vacuum

My Eureka Boss Widetrack leaves debris behind while sweeping. I have the setting for carpet and debris is left behind on the floor.


Check for blockages in the brush bar compartment and hoses ... Vacuums

Bissel Pet Hair Eraser spits out dirt and dog hair when using hose tools..all filters have been claen and emptied. Dirt is being spit out of the "hose wand base" where the hose is detached to add the tools.


... Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum

Roomba goes in a circle moves about 5 inches and then turns in a circle again. It won't dock or go any farther than a few inches before turning in a circle again. The roomba has been cleaned inside and out. All hair and debri as been taken out of the wheels and brushes. i opened the case and cleared all the debri and i dusted the sensors in the front. Not sure what to do now.


... iRobot Roomba 550 Vacuum

IRobot 537 not picking up debris


... iRobot Roomba Discovery SE Bagless Robotic Vacuum

Roomba won't pick up debris


I had this problem until I wiped the dirt sensor, which you will find under the rollers. ... Vacuums

Debris around the motor shaft


Remove sole plate then you can get to the belt ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

HYLA SPITTING OUT DIRT AS I PICK IT UP


... Vacuums

Envirovac kicks debris back at my feet and is loud


It sounds like you may have build up in the fan chamber of this machine. If dirt gets building up on the fan it can cause a loud noise and reduce the suction to the floor tool. The motor is serviceable and can be cleaned. It could also have a moto ... Eureka High Filtration s Mighty Mite Enviro Vac Vacuum

I have an Oreck XL2 that spits out dirt


... Oreck XL Ultra Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0115 seconds