Having problems with your Dyson DC07 Bagless Upright Cyclonic Vacuum ?
My dc07 yellow does not suck
\015 The wand has suction but the floor does not.\015
Repair Help & Product Troubleshooting for Dyson DC07 Bagless Upright Cyclonic Vacuum
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
My dc07 yellow does not suck
... Dyson DC07 Bagless Upright Cyclonic Vacuum
The bottom of my dyson dc07 original is not sucking and the roller is not rolling but the hose is sucking and i have cleaned the whole thing PLEASE HELP ME!
U need a new clutch assembly\015\012refer to this site for more details on dyson vacuums and to submit a repair form\015\012\015\012D ... Dyson DC07 Bagless Upright Cyclonic Vacuum
My dyson dc07 animal bagless upright cyclonic is giving me problems with the bottom part where it sucks up the dirt the part that covers the brushes is not going on like it suppose to what am i doing wrong
CKECK Clutch Assy and belt\015\012bottom part where it sucks \015\0121: try us WD40... \015\0122: Replaced power switch Part No : 910971-01 ... Vacuums
I have a Eureka SurfaceMax 300 yellow one and its not sucking up very well at all, and its blowing dirt and dust out the back?? my ol man checked tonight and said the roller isnt spinning, so if i jus
Here is the manual , check belt is not broke, and the pipe behind the brushbar is't blocked up,http://www.eureka.com/FileLibrary ... Vacuums
DYson DC07 not sucking properly when in upright mode. I have tried cleaning out pipes etc and even tried an old motor section I had in garage (replaced once under warranty as kept cutting out and they left old motor section here). Even the old motor section had same prob so this suggests its something in the rest of the vacuum cleaner (whats left after you have lifted off the green motor section and dust collection area if you see what I mean? Any advice weclome please.
Blocked filters ... Dyson DC07 Bagless Upright Cyclonic Vacuum
We replaced the short hose that connects the sucking part to the hole where the dirt goes underneath my Dyson DC07 but now the side of the hose that needs to attach to the machine falls off.
I know the hose you are talking about it is called the DC07 internal hose. Over time the ends can stretch and perish which will mean y ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
Hose is not sucking - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
Just now, it was OK before? ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
Dyson dc07 The rotating brush on the bottom of my vacuum was filled with strings. I removed the brush by undoing all yellow plastic screws from plate. Removed all strings and replaced as best I could and it was hard to get the brush back in and the belt around it. I dont have my manual but it fits so it should be correct....? Right? No, not true, because when I turn it on and try to and vacuum (by lower canister with foot release) it makes that terrible ratching sound). Please help
The loud ratching is a warning to tell you that there is something stopping the roller bar from rotating this is a very common thing lay the machine on the floor front side down take off the bottom plate and just check the belt is in the centre of th ... Dyson DC07 Bagless Upright Cyclonic Vacuum
DC07 animal. When I use the 'wand', the tube is sucked back into the pipe.
Hi there, \012This is a simple one. You have a blockage in your suction hose. Remove the hose entirely from the machine and retrieve the blockage. You do have to be careful what you use to remove the blockage as you dont want to dage the hose. ... Dyson DC07 Bagless Upright Cyclonic Vacuum
Not sucking at full potential - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum
You have a clogged hose. The clog must be removed for you to get suction. you might be able to blow the clog out but you will probably have to do some disassembly to remove the clog. ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum
I have a Dyson DC07 Yellow Vac, I use this vacuum professionally and clean it after every job so there is no issues with the filter which are replaced regularly. When you turn it on it makes a noise as if it were blocked....I have checked all pipes, hoses and now disassembled the machine to the point where the motor is out. I have found that a small rubber valve or bleed valve (Attached to the right hand detachable filter housing and activated via an internal spring) is popping when the vac
Hi, Where exactly is this spring? ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
The brush on our Dyson DC07 isn't moving - the band has not broken, is still attached but not moving the brush. the hoover is still sucking up dirt but not brushing anything up
Check beside the on/off switch. My model has a button beside the on/off switch that turns the brush on and off. It just has a picture on it no word. Hope this helps! ... Vacuums
I am trying to use the quick draw hose on a dyson dc07 vacuum cleaner. I see the yellow button that I am suppose to push but I cannot find the hose
The hose is integral with the handle. If you lift straight up on the main handle while simultaneously pressing the hose release button, the hose and wand will pull out together.\015\012\015\012-R ... Vacuums
Dyson dc14 attachment not sucking - Dyson DC07 Bagless Upright Cyclonic Vacuum
... Dyson DC07 Bagless Upright Cyclonic Vacuum
My vacuum is not sucking theirs a yellow pellet that indicates the air flow. And when i turn it on it moves and i think thats part of the problem i don't know what to do i lost my manuel help.
Try emptying bag. then clean filter. then unblock hose using a broom handle. let us know how it goes. ... Hoover Vacuums
I want to clean the cyclones on my DC07 Dyson How do get the yellow top off of the glass bin?
Hi there I have made a video to show you how to clean out the radix tubes on a Dyson DC07 vacuum cleaner. If it is helpful to you please take a moment to give me a thumbs up or even write a testimonial. If you need to get filters or other ... Dyson DC07 Bagless Upright Cyclonic Vacuum
My dyson dc07 animal has lost most of its sucking power
You may have a blockage somewhere in the machine. Call the Dyson helpline, they'll walk you through a blockage troubleshoot. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
I have a DC07 Animal Vacuum It works and sucks but the beater brushes do not turn Can you help me
Make sure the setting is on carpet and not on bare floor. The brushes will not turn when it is on the bare floor setting. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
Not sucking, floor
The filter can be located at the bottom of the vaccum where the motor is if you look on the right of the machine you should see a little yellow or silver catch if you push it back you should be able to pull out the large round disc looking object thi ... Dyson DC07 Bagless Upright Cyclonic Vacuum
Dyson dc18 yellow sparks after Dolls hairnet got caught ironed brushes
Vac not sucking up water
Its supposed to, it means you need to dump out the tank. Its a safety feature that keeps the water out of the motor. if its lifting up due to foaming, than try using the original brand shampoo ... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum
Mains cable on dc07
Generally no unless you're a certified electrician. It would involve taking apart the bottom section of the Dyson or wherever the cord leads to, and splicing the cable out of the connection end when you open up the Dyson. Easiest solution is really t ... Dyson DC07 Bagless Upright Cyclonic Vacuum
How to remove a metal cigar tube from the dyson dc07 wand
... Dyson DC07 upright vacuum - pink
DC07 brush wont spin on bottom, took all apart and wont work
Hithe belt is broken or stretched, replace it ... Dyson DC07 Bagless Upright Cyclonic Vacuum
Initially it was not sucking, I replaced the broken belt. Now it is sucking but not throwing in to attachecd container and also the hose is not sucking.
Hi,\015\012Check that there is not an obstruction inside the hose.... Have had a number of them that the hose was plugged up with dirt, fuzz, etc,,,, it can be hard to find sometimes...Take at least one end of the hose off and make it straight, ... Vacuums