Having problems with your Dyson DC07 Bagless Upright Cyclonic Vacuum ?
No suction in wand only
\015 Could no suction in the wand be caused by anything else? And how do I replace this part?\015
Repair Help & Product Troubleshooting for Dyson DC07 Bagless Upright Cyclonic Vacuum
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Hi my dyson dc18 has great suction from wand but when you got to use the vac for floors little suction but wand still got suction even while vacuming floors is it suposed to stop suction from wand
My Dyson dc18 had the same symptoms. The wand worked well and the floor bar had no suction. After removing pieces & shoving my fingers into the machine (no blockage) I found the suction pipe rotates between two positions (floor and wand). It look ... Dyson DC18 all floors Bagless Upright Cyclonic Vacuum
The suction that comes out of the wand is very light, it's sucking things up, but the suction is very light. You know how you put your hand on the wand of a vacuum and the suction is so strong you
Check this video out ... Dyson DC25 All Floors Bagless Upright Vacuum
On my DC17, the wand is not working right. The upright part works fine, but when I go to use the wand, the hose sucks in on itself. I get suction for a few seconds, then the hose collapses in on itself and no more suction.
... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum
Dyson DC17 Animal does not have enough suction from the wand handle to power the mini turbine head. The wand handle has very little suction.
My dyson doesn't have suction either and nothing is blocked. In fact is was working great the vac that is, but when I used the wand for the first time to get the corners the vac shut off, I checked the hoses, filters and all nothing is blocked. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum
There is no suction to the wand and attachments. Floor suction is great. Seems like something is blocking the wand.
It may be nothing wrong with the wand...but the valve that redirect the suction from the floor to the want...Either is not closing proper in the position that redirect the suction ...or it has something that block it when it tries to do the action.. ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum
The wand appears blocked but there are no blockages, there is enough suction to collapse the wand but no suction
The filter at the bottom has been washed or not? ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum
Ive got powerful suction from my wand when i am using my dyson upright, so the suction on the bottom not good
... Dyson DC07 Bagless Upright Cyclonic Vacuum
No suction My vacuum does not seem to have much suction when in use. The agitator brush is rotating but I'm not able to get much off the carpet. The suction is fine when I use the attached wand.
If the belt is stretched, then it can't turn the brush rol under load, if you haven't chenged it in the last 6 months, then I would put a new one one. Also check the dirt inlet by the brush roll for a blockage. ... Riccar 8955 Upright Vacuum
No suction vacuum working fine and suddenly, no suction at all....what could be the problem? no suction through the machine from either the wand or the floor/brush side
Sucked up a sock?? No seriously.. it may be as simple as that or that an on board filter is clogged. Check your manual for all filters and Hepa/screens and others. Also, is the unit making any odd noises since the non -suction scenario? Whining or s ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum
I have the dyson animal. There is something stuck in the wand tube and everyting is getting caught on it. There is very little suction from the wand. How do I get the wand apart or somehow get the object stuck out of the tube? Thanks
Yes, things stuck in vacuum hoses are not always as easy to remove as one might think. Trying to push it out with something can be counter-productive, and only get the thing stuck tighter! If you have a second vacuum, you can try sucking it out the w ... Vacuums
Dirt Devil upright doesn't have suction. I changed the belt and the bag. The suction is so slight it won't pick up a small piece of paper. The accessory wand also does not have much suction.
Try cleaning chute that fills bag.may be obstruction blocking the flow of air ... Vacuums
Utube dyson no suction in wand & wand is clear
... Dyson DC18 Allergy Bagless Upright Vacuum
Suction in Wand Only, (No suction down below).
Check the small hose that is under the machine ( it connects to where the brush roller is ) also you can remove a u shaped tube near the bottom of the machine and also another on the right side of the machine near the bottom as well ... Dyson DC07 Bagless Upright Cyclonic Vacuum
My dyson slim vacuum doesn't have suction on the bottom. The wand has suction, how can I fix this?
... Dyson Slim DC18 All Floors HEPA Bagless Upright Vacuum - Iron/Titanium/Yellow
No suction on wand of Dyson DC14 Animal
Hi its Darran at Dyson.It sounds as though the wand handle is blocked. To check this, remove the wand/hose from the machine as if you were going to use it to vacuum the stairs. Switch the machine on and test the suction at the top of the ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
No suction below when carpet mode or bare floor mode selected Lots of suction with wand
It is probably clogged near where the floor part picks upthat is why the wand still works ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
Dyson all floor vaccum no suction when hand held wand is turned on... doubled checked for cracks in hose -- none took house off unit to check for blockage --- none.. suction works fine when using as normal on floors.
You need to replace the belt that drives the brush on the underneath side of the vacuum. To do this, you need to flip the vacuum over and remove cover plate. There you will find the broken, or stretched out belt. Remove the brush and place the new be ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum
My dyson DC 14 loses all suction when I put in the filters(cleaned). There is suction from the wand. Any help?
... Dyson DC14 Bagless Upright Cyclonic Vacuum
My Dyson DC 18 has no suction in the wand. it is in the upright position and the wand and hose is cleared from debris.
... Dyson DC18 all floors Bagless Upright Cyclonic Vacuum
I have a DC17 which is only one year old. Today I lost suction and called for assistance. A Dyson technician told me to pull off the wand and see if it is clear. It was clogged so cleared out the obstruction. My filter was cleaned more than 24 hours ago. The vacuum still has no suction. Is it dead, any other suggestions. Please help.
Take the hoses off and give them a good shaking.\012or get a long piece of stiff wire and gently poke through the obstruction. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum
My dyson dc18 has no suction from beneath, but the wand has lots of suction.
The head is blocked by something, it could be a bottle top, rolled up tissue, or something like that.Take it off the end of the wand and look down the hole 'with a flashlight" where the wand goes into it..You should be a ... Dyson DC18 all floors Bagless Upright Cyclonic Vacuum
My dyson slim has good suction to the wand but won't switch to the floor suction... Help..
Flip the vaccum upside down and if there is a seperate suction hole for the floor accessory try to see if it is clogged. Otherwise a little belt may have slipped of which makes the brissles go around. ... Dyson Vacuums
The wand does not have much suction and then when trying to use the wand the machine just shuts off, when I turn it back on the brushes will not turn for a while. Please HELP.
... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
Suction When I extend the wand I lose suction and the noise changes
If the wand alone causes a suction loss, there are only a couple of issues:\015\012\015\012\015\012leakage\015\012blockage\015\012If it is leakage, remedy the defect or install the wan ... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum
Eurika Vaccuum 12V Mega Boss - the suction is fine with the extention tool however when there is no suction at all when the extention wand is not in use.
There is a blockage behind the brush between where the suction tube hooks up and the brush. ... Eureka 5893AVZ Bagless Upright Cyclonic Vacuum