Having problems with your Dyson DC07 Bagless Upright Cyclonic Vacuum ?

Dyson DC07 belt change has resulted in very noisy vacuum!

\015 I have changed the belt on my Dyson DC07 and the suction is now like new, however it is hugely loud to the point of not being able to use it. II have checked brush roll and hoses and there are no blockages. It sounds like the motor is straining. Any advice?\015

Answers :

Hi I agree with the first 2 solutions above but not the 3rd one.
If you have suction coming through the hose when the machine is in upright position then the u bend has nothing to do with this problem.

Right so ... The belt snapped.

The answer to you question is "why did the belt snap" its true that it could just be old age but its more likely to have been caused by a foreign object being sooked up.

How the belt/brushbar/motor interact

Your belt simply connects the motor to the brushbar know as Direct Drive. If an object get inside the space between the motor and the brushbar or if it can jam the brushbar then this will cause the rubber to burn. The motor will keep spinning and the belt wont be able to so will snap.

So its easy to see that the belt has snapped and people just think "'oh the belt has snapped"

You might wonder where im coming from here.

Anyway because the brushbar got jammed it may also have been buckled slighty either as a result of the foreign object causing it to stop suddenly from spinning at high speed or/and the result of the heat build up.

The rattling noise you now find your Dyson making is more than likely because your brushbar is buckled and when it spins the bristles are hitting the housing unit.

Your belt will snap again unless you replace the brushbar
Repair Help & Product Troubleshooting for Dyson DC07 Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dyson DC07 belt change has resulted in very noisy vacuum!


Hi I agree with the first 2 solutions above but not the 3rd one.If you have suction coming through the hose when the machine is in upright position then the u bend has nothing to do with this problem.Right so ... The belt snapped. ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Change belt on dyson dc07 animal - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

How do I change belt on dyson DC07 - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

How do you change a belt on a dyson DC07 - Dyson DC07 Bagless Upright Cyclonic Vacuum


Turn vacuum over so you can see the brush.\015\012Using a standard screwdriver, undo the three fasteners just behind the brush.\015\012Remove the base plate.\015\012Remove the belt.\015\012Remove roller brush.\015\012Pla ... Dyson DC07 Bagless Upright Cyclonic Vacuum

How to change brush belt on dco7 dyson - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


This depends on whether your DC07 has a brush control clutch or not. For excellent illustrated guidance go to www.dysonmedic.com and click on DC07. For belt change on a model without clutch click on "belt and brushroll". It's simple! For models with ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

How do you change a belt on a dyson 07 - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


You want this part.http://www.sparesaverusa.com/vacuum-spares/dyson/dc07/dyson-dc07-parts/belt-changing-tool-for-dyson.html ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

How to change a hoover belt on a dyson - Dyson DC07 Full Gear Bagless Upright Cyclonic Vacuum


... Dyson DC07 Full Gear Bagless Upright Cyclonic Vacuum

How do you change the belt on a dyson DC 07 - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


DC07s have two belts - one connects the output of the motor to the clutch, the other connects the clutch to the brush bar.I suspect the belt you ar ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

I need to change my fan belt on my dyson - Dyson DC07 Bagless Upright Cyclonic Vacuum


You can get the belts you need here:Belts for Dyson DC07 with Clutch System ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Need to change the belt - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Here is a very helpful place to learn how to maintain your vacuum.Dyson MedicHope this helps yo ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

HOW TO CHANGE THE BELT ON THE DC7 - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Changing belt - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Here is a link for the\015\012instructions on how to change the belt and a link for the belt you need:DC07 Belt Changing Instructions ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

How do i change the belts - Dyson DC07 Bagless Upright Cyclonic Vacuum


This is the part you want.Can get belts from there toohttp://www.sparesaverusa.com/vacuum-spares/dyson/dc07/dyson-dc07-parts/belt-changing-tool-for-dyson.html ... Dyson DC07 Bagless Upright Cyclonic Vacuum

OUR DYSON 07 SWEEPER HAS VERY LITTLE Vacuum, have cleaned all filters and hoses, on line troubleshooting has said to check soleplate being on correctly, we have done this, still does not have good vacuum, belts are covered by a housing, the video that shows the changing of the belt is not the same, I need to know how to remove the cover to check both belts and any help in gaining the vacuum


This video shows you everything you need to know ... Vacuums

Dc07 dyson how do i change the fan belt on my dc07 dyson


Need replaced Clutch Assy only\015\012part no: 900252-04 ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson dc07 brush not turning belt is intact? - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


DC07s have two drive ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

Dyson DC07 drive belt replacement


Hi.\015\012\015\012The other end of the drive belt the part you cant see goes to a clutch.\015\012The clutch unit has 2 belts one is clutch to motor the second is clutch to brush roller.\015\012You obviously look after your ma ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson Animal dc07 -- change belt


Read the manual -- available on the Dyson web site. Brushbar not spinning • Ensure brush control is set on carpets mode. Note: brushbar will only spin when the handle is reclined. ... Vacuums

I have a Dyson DC33 bagless vacuum and the beater brush is not turning .. How do I get the cover off the brush to change the belt?


If you lay it down so you can see the bottom of the vacuum, there should be 3 flathead looking screws,just turn them a quarter turn or so, and that bottom should pop off so you can take the brush out and change the belt, just make sure you watch how ... Dyson DC-33 MultiFloor Upright Vacuum Cleaner

"CHANGING CARBON BRUSHES ON A DYSON VAC" - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


You dont need to replace with new motor,i just replace the brushes not had no problem yet.. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

How do you change the belt on a dyson DC 27 - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


Hi its Darran at Dyson. The belt on this machine is part of the clutch mechanism and as such we only recommend that a suitably qualified engineer carries out any repairs to this. If you would like to talk through the options w ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

My dyson dc01 fan belt keeps breaking - Dyson DC07 Bagless Upright Cyclonic Vacuum


Ok 1st check that the roller is free to move otherwise it will stress the belt..next no sharps on roller guide or brush roll to cut into belt..Please leave feedback ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Replace belt for dyson upright - Dyson DC07 Bagless Upright Cyclonic Vacuum


DC07s have two belts - one connects the output of the motor to the clutch, the other connects the clutch to the brush bar.I suspect the belt ... Dyson DC07 Bagless Upright Cyclonic Vacuum

How do you change the belt on dyson dc14 - Dyson DC14 Bagless Upright Cyclonic Vacuum


Hi, thanks for contactin Fix Ya!\015\012\015\012Here is a video which gives you step by Step instructions on how to do exactly this.\015\012\015\012 ... Dyson DC14 Bagless Upright Cyclonic Vacuum

How do i change the belt on a dyson dc14? - Dyson DC14i Bagless Upright Cyclonic Vacuum


Which belt? There are two belts. One from the clutch to the brush roller, the other from the motor to the clutch. A good place to start is: ... Dyson DC14i Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1201 seconds