Having problems with your Dyson DC07 Bagless Upright Cyclonic Vacuum ?

Not sucking, floor

\015 I'm pretty sure we have this DC07, the yellow stand up bagless. The floor brush is not sucking up large pieces on the floor. I saw a note about a washable filter....where is this filter and how do I get to it?? I'm sure ours hasn't been cleaned!!\015

Answers :

The filter can be located at the bottom of the vaccum where the motor is if you look on the right of the machine you should see a little yellow or silver catch if you push it back you should be able to pull out the large round disc looking object this is your filter housing once removed pull out the yellow casing which may be pretty tight underneath sits the filter after you wash the filter make sure its completly dry before you replace it
Repair Help & Product Troubleshooting for Dyson DC07 Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My dirt devil easy lite cyclonic does not suck up the dirt or anything on the floor anymore the rollers still roll. It stop sucking.


Check and make sure that the pickup tube from the bottom of the sweeper to the waste cup does not have a clog anywhere you can use a metal coat hanger and straighten it out and carefully run that thru. ... Vacuums

Hoover SteamVac Plus 1200 upright hot water extractor Water/carpet cleaner applying o.k. Suction on the "floor" does not work. Suction on the hand tool works somewhat, but water is not collecting in the bucket. There is suction coming from the floor but water is not going into the bucket. It does not appear to be clogged because I can feel with my hand that air is flowing from the floor. The water is not being sucked into the bucket.


... Hoover Vacuums

The bottom bar that encases the brush is flush to the floor when using the vacuum. This causes the suction to "stick" the vacuum to the floor (lamenate) and also as there is no ground clearance debris is just pushed around. We have to nearly stand the thing upright to get the ground clearance to be enough for things to start being sucked up. I have taken apart, re-assembled etc and nothing is working.


I'm having the same problem.  The bottom plate is not level with the floor unless the vacuum is nearly in the upright position.  Its like there should be a spring pushing the bottom plate towards the floor.  Anyone know how to fix this ... Dyson DC07 Bagless Upright Cyclonic Vacuum

It is scrubbing and depositing water/solution on to the floor but is not sucking the water back up. i switch it to wet pickup on the handle from scrub setting. it leaves muddy tracks on the floor.


Check the filter, if it is dirty this will cause the vacuum to lose suction. You can buy a new filter if necessary. ... Hoover Floormate H3000 Upright Wet/Dry Vacuum

Rollar is not turning. Belt seems to have tension. Does not **** anything up off of the floor. Filters are clean but when we turn it on, the roller is not turning or sucking anything up off the floor.


Hi Susan,I'm sorry to hear you're having difficulties with your DC07. It's probably best if you get in touch with us directly so we can determine which model of DC07 you have, and run through some troubleshooting over the phone with you. You ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Lost manual last time i used the upholstery tool and i think i forgot to put a part back on...from the floor head to the recovery tank the water comes up but i have a gap there...the water won't suck up off the floor...


Send your email address to [email protected] I found the pdf manual file for this unitl ... Hoover F5906-900 Upright Steam Vacuum

When vacuuming hardwood floor, hair gathers on brush and never sucks into vacuum. I spend most of my time cleaning off brushes. How do I clean hardwood floor with dog hairs.


1. Broom and dust pan, then mop\015\0122. Wet dry vac with wide non-brush attachment\015\0123. Here's a link to a vacuum professing to clean pet hairs well\015\012\015\012 ... Sebo Air Belt C2.1 Bagged Canister Vacuum

There is no suction from the head on the floor. The hose is sucking properly but not the floor brush. I have checked for blockages and can't find anything - any ideas?


I have exactly the same problem!\015\012i think it is something to do with the transfer hose that changes the suction from the hose to the brushes ( it is at the bottom left of the machine as you look at it from the front! ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Solution tank does not dispense--recovery tank still sucks up dirty water from tile floor on screen porch. I applied cleaner manually with a scrub brush and sucked it up with the hoover steam vac deluxe.


Check to see if the when you squeeze the trigger, the rod is hitting the reservior asm(tank sits on). If not then there is a problem inside the handle and the rod. If it is hitting, then the reservior asm. is bad. Also make sure fluid is coming ou ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

The vacuum only sucks threw the hose, and not threw the floor. is there some kind of button to push to make it **** threw the floor instead of threw the hose.


... Eureka Surfacemax 200 Bagless Upright Vacuum

Losing sucking power, the unitbarely lifts tissue paper up off the floor and in to the unit. The sucking power is not what it used to be. Clogged perhaps?


Your filters are getting clogged. It sounds like you have a bagless!? You will need to replace or clean your hepa filter. It is usually located inside or underneath of your canister. It would also be good to clean the rest of your filters also. ... Vacuums

I have a Bissell ProHeat 2X which releases the water/shampoo mix fine, and will suck up using the hose, but will not suck up using the main floor unit. Have checked it all out, and there do not appear to be any blockages. Help please


The vacuum on its back then look under the front where the water comes\015\012out, you will see few little round holes now the chances are these\015\012holes are blocked so get something long like a pin and poke these holes\015\012through you should ... Vacuums

Well the hoover seems to be sucking in very poorly and nothing off the floor is being sucked up. how can i make it stronger suction?


U need to make sure that the dust collector is empty and any filters fitted are clean and check the hoover belt if fitted is working ... Vacuums

Not sucking, floor


The filter can be located at the bottom of the vaccum where the motor is if you look on the right of the machine you should see a little yellow or silver catch if you push it back you should be able to pull out the large round disc looking object thi ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Won't suck up water from floor


Lay the machine on its back. Look at the 1"round clear spiral pipe uptake assembly.\015\012Mine spit open after 2 or 3 years of use and would not suck up (not with that 1" OPENING HA HA )\015\012yOU NEED THE WATER UPTAKE ASSEMBLY for $15 bucks.\015\ ... Hoover Floormate H3000 Upright Wet/Dry Vacuum

Dyson dc40 sucks from Hose(at the handle) while vacuuming floors


... Dyson Dc40 Multi Floor Lightweight Ball Upright Vacuum Cleaner

Hoover floor mate sucks up water while in the wash position


They do that. They pickup the water in all stages but lower the squeegee to different heights. At no point does the suction turn off. ... Hoover Floormate H3000 Upright Wet/Dry Vacuum

Not sucking up particles when vacumeing floor


It must be clogged or the felter is dirty ... Dyson DC18 all floors Bagless Upright Cyclonic Vacuum

Not sucking up dirt off floor any longer


Chances are there is some blockage in the pathway from the floor to the bagless colllector. Use a flash light to look in the tube and straighten out a wire coat hanger to probe the areas you can not see. \015\012\015\012Finally if your ... Bissell 6594 PowerForce Bagless Upright Vacuum

My machine is producing steam, but not sucking it back up so floor just getting wet - any ideas?


Will spray but will not **** up water. ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

Its not sucking up much off the floor. could it be that its clogged some where?


You need to clean the filter inside the container. also check hose ... Bissell 6594 PowerForce Bagless Upright Vacuum

Hose has no suction: When the floor head is up the machine makes a louder noise (sucking) and the hose won't **** hard enough to pick anything up.


Check to see if the hose is blocked or the inlet at where the hose goes into machine ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

We have a Beam1500 central vac. It sucks stuff off the floor, but then just clogs in the head of the unit.


The head itself is likely the power head..,which is sweeping but the neck is probably clogged. Detach your wand and look thru. Drop a coin thru your hose handle and shake thru the other end. If these are clear the issue is the head.Then check t ... Beam Industries 750 Classic Bagless Central System Cyclonic Vacuum

I got a used Scooba which is not sucking up the solution from the floor after it dispenses it.


Turn the tank over. It's transparent on the underside, and there are two oval-shaped openings that stick out more than an inch, located toward the middle. On the far right and far left sides, next to each oval opening, there is another opening. ... iRobot 5900 Scooba Robotic Wet/Dry Vacuum

My vacuum doesnt **** dirt from the floor but sucks dirt with the nozzle.


Probably have a clogged intake from the beater bar thru to the vac system.. Try this.. with the vac unplugged, flip the vac over so you can get to the bottom of the vac head near where the brush rotates.. then depending on the model.. remove the cove ... Eureka Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0430 seconds