Having problems with your Dyson DC07 Bagless Upright Cyclonic Vacuum ?

Dyson dc05 motor cuts out

\015 Hi Chris,I've seen that you can provide spares motor cutout and possibly the capacitor for dysons.My DC05 has stopped working after cutting out for a while. I've opened it out and tested some parts. The switch is ok (tested with universal voltmeter). Also the motor shows reasonable resistance which means that it is not blown.My only suspect part is the capacitor failing to start the motor?I don't know if there is thermal cutout and where it could be.Any suggestions welcome.Regards,Tigran\015

Answers :

Hi,
\015\012
\015\012Check for either voltage to switch or if your not happy or compettant working on live mains.
\015\012Switch meter to ohms ensure vacuum is unpluged from mains follow live wire (brown) from plug to exit point on the back of cable rewinder check for continuity shold be dead short if it is check switch if this is ok move to neutral (blue) wire again check from plug to rear of cable winder.
\015\012The neutral then goes off to moter again check for dead short,
\015\012I think from experience that you will have A break in either live or neutral in the mains lead going to cable winder.
\015\012If it is its realy easy to replace winder they come with lead all ready fitted.
\015\012If you need one contact me.
\015\012
\015\012http://dysonmanuals.llc.nu/index.htm
\015\012
\015\012Chris...
Repair Help & Product Troubleshooting for Dyson DC07 Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dyson dc05 motor cuts out


Hi,\015\012\015\012Check for either voltage to switch or if your not happy or compettant working on live mains.\015\012Switch meter to ohms ensure vacuum is unpluged from mains follow live wire (brown) from plug to exit point on the ... Dyson DC07 Bagless Upright Cyclonic Vacuum

DYson DC07 not sucking properly when in upright mode. I have tried cleaning out pipes etc and even tried an old motor section I had in garage (replaced once under warranty as kept cutting out and they left old motor section here). Even the old motor section had same prob so this suggests its something in the rest of the vacuum cleaner (whats left after you have lifted off the green motor section and dust collection area if you see what I mean? Any advice weclome please.


Blocked filters ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Wiring diagram for Dyson DC05 Motor. Bought a replacement motor and wiring slightly different from original. Thermal cutout on both motors.


... Dyson DC05 Cylinder Bagless Canister Cyclonic Vacuum

My dyson animal just cuts out mid vacuming ,the motor gets quiet hot ,and wont start again for an hour or so when i expect the motor cools down .all filters cleaned no blockages etc.. any suggestions?????


This is a feature so that the motor does not burn up check all tubes ... Vacuums

Dyson DC07 My DC07 cuts out after 5 mins and I want to replace the thermal cutout. I have cleaned it thoroughly, including the cyclones but it still cuts out. How does the plastic moulding around the motor dismantle? I have started by removing the 4 torx screws but the upper grey housing does not want to detach and I am worried about breaking the plastic. Appreciate any advice.


Try this page: -http://www.fixya.com/support/t192124-overheating_dyson_dc07Regards Gualo ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Motor cuts out after 5 mins on dyson vacuum


Hi Peter,I'm sorry to hear about this. From what you've described, it sounds as if your machine may be overheating due to a blockage - the filter may also need a wash.To locate and remove any blockages, please follow the steps shown i ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Thermal fuse keeps cutting in, Is there any way to check motor before replacing it. on a dyson upright cyclone model


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

My dyson hoover keeps cutting out and smells of burning i cant see any obvious blockages does this mean the motor has gone


Hi, It definitely sounds like the motor is toasted.If you visit\012http://www.sparesaver.com/help-and-support/dyson-section/dyson-technical-advice-450/\012they have alot of info on repairing dyson cleaners AND they sell the\012parts, chea ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My dyson dc05 serial no 070-uk-660903 pre motor filter keeps blocking up


... Dyson Vacuums

I have a dyson dc05 absolute turbobrush vacuum. turned it on and it slowly died in seconds. then tried to turn on again and only came on sporatically for a moment. Is it the on/off switch or motor?


Hi there VacuumGuru for vacuumspot.com.au here. It is likely to be the motor for that model but it is easy to test. I will answer this with the assumption that a person wouldn't try to repair something they are not qualified to do. All you have to do ... Dyson DC05 Bagless Canister Cyclonic Vacuum

Dyson DC05 buring smell and stopped working. On quick inspection, tiny bits of copper wire inside air filter case. Motor windings possibly burned-out?


Scrapped it! ... Vacuums

My dyson keeps cutting out,could it be the motor post filter


Unlikely. It is more likely to be the washable pre motor filter. Check the tutorials here: Looking after your Dyson. ... Dyson DC07 Bagless Upright Cyclonic Vacuum

HOW TO TEST A DYSON MOTOR.


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson DC07 motor overheats


The motor brushes are worn down and can be expensive to get someone to fit them for you so i think its time for a new cleaner ... Dyson DC07 Allergy Blue/Turquoise Bagless Upright Cyclonic Vacuum

Dyson motor making high pitched noise. Is this


Most likely, there's something in the dirt tube. Ic could be something like a piece of paper or cellophane, vibrating from the air going over it. without hearing it, a high pitch noise could be different things. ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Why does my dyson dc04 work for about 5 mins then cut out the wire on my dyson 04 needs replacin but i cant get the casing off. My DC04 cuts out after abou 5 minutes use. I think there may be a thermal cut-out somewhere?


Thermal cut out in coils of motor,you have not been keeping filers clea,I THINK.\015\012motor is avaliable ... Vacuums

Dyson cleaner keeps cutting out, no blockage found, filter clean.


1. Check the on/off button these can also be troublesome and if you've stood on the cable once or twice you could have a break in the wire and it's shorting, check by turning on and wiggle cable around where it enters machine.\015\0122. Faulty ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

HOW TO TEST/CHECK A DYSON MOTOR


... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson DC35 cuts out after 10 seconds or so, and only starts when it feels like it


... Dyson DC35 Digitial Slim Multi floor cordless vacuum cleaner

Dyson DC05 MotorHead schematic


Hi David,Unfortunately the DC05's Motorhead is supplied as a complete assembly, so we're unable to offer individual components to repair your Motorhead. If you'd like to order a replacement Motorhead assembly, you can do so via our Helpline o ... Dyson DC05 Bagless Canister Cyclonic Vacuum

Dyson dc05 won't start - Dyson DC05 Cylinder Bagless Canister Cyclonic Vacuum


... Dyson DC05 Cylinder Bagless Canister Cyclonic Vacuum

I have a nearly 9 year old Electrolux Excellio Z5228 vacuum cleaner. It has recently started cutting out during operation. I cleaned the micro filter (between bag & motor) via brush & hitting against wall & seems / looks quite clean. I washed the gore filter (output from motor to clean the exhaust air) as per instructions, then let to dry. It was very clogged but now very clean. The vacuum clearner still cuts out often. Even after a long rest (say overnight) it still won't start, then ano


... Electrolux Vacuums

Thermal senser on the side of the vacuum motor there is a little thermal senser that has rust all inside of it ,my ? is will that cause the motor to shut down ,could the rust in the senser causing it to cut off ,cause the vacuum runs well then cuts off


If it is going bad, it will cause the motor to shut down, replace it then you will know if that is the problem or a problem with the motor itself. ... Vacuums

Dyson My Dyson DC04 runs for a second or two then stops. I have checked the motor. The brushes are good but the commutator is a slightly pitted.Do I need a new motor?


Hi.\015\012\015\012Check mains lead where it enters machine very common for internal fracture.\015\012\015\012To prove this try waggling lead with machine switched on if it starts & stops this is the fault.\015\012 ... Dyson DC05 Cylinder Bagless Canister Cyclonic Vacuum

Dyson cordless cuts out


... Dyson DC34 Handheld Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0436 seconds