Having problems with your Dyson DC07 Bagless Upright Cyclonic Vacuum ?

Dyson DC04 cuts out intermittently whilst in use

\015 How do I get into it to check cable connections?\015

Answers :

Repair Help & Product Troubleshooting for Dyson DC07 Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dyson DC04 cuts out intermittently whilst in use


... Dyson DC07 Bagless Upright Cyclonic Vacuum

Why does my dyson dc04 work for about 5 mins then cut out the wire on my dyson 04 needs replacin but i cant get the casing off. My DC04 cuts out after abou 5 minutes use. I think there may be a thermal cut-out somewhere?


Thermal cut out in coils of motor,you have not been keeping filers clea,I THINK.\015\012motor is avaliable ... Vacuums

Dyson DC11 cut out whilst in use and won't start again. Plug is fine, problem is at vacuum end.


I have read that it is due to an internal safety mech. that reacts when the motor is pulling to much current and shuts down for safety.If you only get 5 min or so before it happens then that is your problem. Dysons have no reset switch so you cannot ... Dyson DC11 All Floors Bagless Canister Cyclonic Vacuum

I have a Dyson upright vacuum cleaner makes a helluva racket whilst in use. Called up Dyson and they told me to flip the floor/carpet knob 10 times back and forth. That did the trick for a short while and it started again. Continue attempts useing that technique does not work. I think in spite of the big bragging I see on the TV this guy braying about how superior his product is it is a piece of junk. I should have bought a Eureka or something, at least it would have been less expensive. I


Hi there,I'm sorry to hear you're having difficulties with your DC07. Your cleaner's brush control system is designed to make a ratcheting sound to warn you if the brushbar is jammed. Since you haven't been able to resolve your issue with ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Why does my dyson dc04 work for about 5 mins then cut out the wire on my dyson 04 needs replacin but i cant get the casing off.


This post may be of assistance: http://www.fixya.com/support/t2842769-fix_new_power_cable_dyson_dc07\015\012\015\012Hope it helps ... Dyson DCO7 Animal Bagless Upright Cyclonic Vacuum

Dyson cuts out when in use


1) restricted airflow overheat or shutdown, test for clogged and repair. 2) change the bag or empty the tank.God bless you ... Dyson Vacuums

How do i alter the dyson dc04 to use on hard floors


Hi there, it's Jack at Dyson.If your DC04 has a brush control on the cleaner head, you'll need to set this to 'On' for carpets, and 'Off' for hard floors. You can find out how to do this on our Support site: ... Dyson DC04 HEPA Bagless Upright Cyclonic Vacuum

My Dyson DC04 Keeps cutting out after a period of time


Check the bottom left hand corner, there should be a yellow button, that could be open, when it's open it, it won't **** ... Vacuums

How do i use the hose attachment on my dyson dc04


Hi Sarah,For advice on using the hose, wand and accessories, please refer to the DC04 user guide. In case you don't have this to hand, you can download a copy here: ... Dyson DC04 HEPA Bagless Upright Cyclonic Vacuum

Why does my dyson dc04 work for about 5 mins then cut out


I spent 4 years working on Dyson v/ceaners in the Uk\015\012So, heres what to;\015\012Check your filters - and for blokages in the hose and brush comparments,you have one in at top of the bucket called pre motor filter and one on top of ... Vacuums

Dyson Vacuum cleaner cuts out after a few minutes use


Sounds like you have a blockage in one of the hoses and it's making your machine to over heat and cut out,check for blockages ... Vacuums

My dyson dc35 hand vacuum cuts out constantly while in use despite a full charge and clean filter


... Dyson DC35 Handheld Vacuum

Dyson DC30 cuts out after 5 seconds use. - Vacuums


If it has a washable (re-useable) foam type filter service that first---if that is dirty and no air flow thru it, the motor will get hot and the thermal cutoff for the unit will kill all power to the unit to prevent motor damage. ... Vacuums

Dyson DC04 upright vacuum Brush disengages (ratchet noise etc) when using on clean shortpile carpet. I have checked that brush is clean/clear but it disengages as if jammed every couple of minutes.


I hate to tell you this but that sounds like the clutch is bad ( a common problem ), It is not very easy to replace but you can buy it at sears ( part number ... Vacuums

Dyson dc25 roller brush intermittently cuts out?


... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

Dyson upright poor suction cuts out after10 minutes use


Check filter, hose and wand for clog. These will lead motor to overheat and thermo switch to trip and kill motor. ... Vacuums

HI, I have a Kenmore 25813 and it seems like there is an intermittent short. When I have the extension wand on and the power floor attachment on, when it rotate the wand the light cuts out and so does the power floor attachment, when I twist it back it comes on again. I don't have this problem if I remove the wand and just use the crevice tool with the hose. Any idea where the short might be and can I fix it myself? Thanks. Gary


This is common you may have a short in the contacts from the handle to the wand or a break in the cord that goes into the powerhead ... Kenmore 25812 / 25813 Progressive Bagged Canister Vacuum

My dyson seems to have lost its suction therefore is not picking up anything yet i have found that when my dyson is standing upright it has a little more suction but nothing like how it use to work. This has only happend in the last 2 weeks. I sanded a floor & though the sander picked up majority of the dust i did use the dyson to pick up the excess and it is since then that my dyson has not been working to its full potential.


Hi there,\015\012\015\012Sorry to hear you're having a problem with your DC07. You should be able to resolve the issue by following these simple steps: ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Cutting out after five minutes use


Sounds like not good air flow check for blockage new filter ... Vacuums

My handheld dyson is not working - initially it was cutting out after only a few mins then seconds now it won't work at all despite showing green light ??


Hi there, it's Jack at Dyson.I'm sorry to hear your DC31 Animal is only working intermittently. When fully charged, this machine should have a maximum runtime of 10 minutes, or 6 minutes on the maximum power setting.There are several ... Dyson DC31 Animal Bagless Handheld Cyclonic Vacuum

DYSON DC04 how to remove switch housing to check


Its most likely not the switch, check the power cord.. check where the cord meets to the vacuum. the cord could be going bad and most likely not a loose wire. ... Vacuums

Vacuum cuts off when using it


Is there any nicks or cuts in the cord? The on/off switches also frequently fail, but usually just wont stay in the on position. try flexing all parts of the cord while running it and see if you can cause the problem to happen. if not move on to the ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Whilst vacuuming I heard a clunk under my dyson dco7i now the barrel will not work


... Vacuums

I have a Zanussi 1700W bagless upright vacuum cleaner which keeps cutting out after about 5/10 mins use. I had to replace the rubber drive belt which snapped not long after purchasing and it was fine for a while, but now its just keeps cutting out after a small amount of use. Nothing wrong with belt which is still intact so we don't know what the problem is. It's a great cleaner otherwise - but it's driving us mad!! Please help!


... Vacuums

Dyson dc04 instruction manual - Dyson DC04 HEPA Bagless Upright Cyclonic Vacuum


Hi there,You can download a copy of the DC04 user guide directly from our website:http://media.dyson.com/downloads/uk/floorca ... Dyson DC04 HEPA Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0495 seconds