Having problems with your Dyson DC07 Bagless Upright Cyclonic Vacuum ?

Vaccum head stuck in down position

\015 Some how my brush portion has gotton stuck in a more forward posistion than it should be. My husband has fixed this many times problem is he had a seizure last week and can not rember how he fixed it. Please help!\015\012I know it is some thing EASY\015

Answers :

\015\012If you look at the front left side of machine there is a removeable inspection port it will have 2 coloured buttons you press these in & pull it up to remove.
\015\012Now pull handle back as if vacuuming the floor.
\015\012Now where the inspection port was you will see that there is a square hole pull forward on the flap in front of square hole it pivots just behind the round rubber seal.
\015\012Slowly lift handle back up at the same time The part with the 2 long grooves in it must go under the flap as you lift handle.
Repair Help & Product Troubleshooting for Dyson DC07 Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Vaccum head stuck in down position

Hi.\015\012\015\012If you look at the front left side of machine there is a removeable inspection port it will have 2 coloured buttons you press these in & pull it up to remove.\015\012Now pull handle back as if vacuuming the fl ... Dyson DC07 Bagless Upright Cyclonic Vacuum

The power head on my progressive vaccum doesn't seem to power on. Nothing appears to be stuck and not sure if I need to take it apart?? suggestions

... Kenmore 23913 Progressive PowerMate Bagged Canister Vacuum

The pole is stuck won't detach from the head of the vaccum, and the pole won't extend anymore

Please say which type of vac? assume upright ? with a flx hose and attachments for vac of stairs or hard access areas are u saying the flex hose with the pole iside it stows at rear of vac and unclips extends pole from flex hose?? wh ... Panasonic Vacuums

Door stopper stuck in vaccum

I would first check down by the brush roll, take off the plate so you can get to the inlet to see if it stuck there, could be in the hose or the bag tube. Could be that it damaged the motor fan, you have to remove the motor to check it. If You had ... Vacuums

Royal vacuum cleaner model 4600 wiring diagram I have a Royal Vacumm Power Tank Model 4600. I replaced the switch (6 wire - 3 position) that is on the tank. One side of the switch control just the blower. The other side control the blower and the POWER head - wand with a variable control speed. The middkle position is off. After I installed the swith, the power head - wand is powered in either position. There are three wires comming out of the wand: White, Red and Black. I guess I wired somethin

... Vacuums

The vacuum is making a noise like something is stuck when it is in the carpet position but not when in the floor position. I can't find anything that is stuck in the areas that I can see. I have cleaned the brush but it does not seem to want to turn. Does this machine need to be oiled so the roller will turn? Is there a way to check inside the motor? Do you think that because the brush won't turn that is making the noise? Do you know of any repair shops in the Lake Havasu City, Arizona area?

As far as the roller brush goes, yes, it does need to be cleaned. Follow the directions to remove it and clean as best you can of all debris. On both ends of the roller brush there will be two "holders" of sort that connect the brush to the frame o ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Unplugged vaccum hose and head of vaccum but still no vaccum what could be the problem

If the motor is running and you have checked airway then you may need a filter ... Kenmore 34721 Upright Vacuum

When I step on the lever to place the vacuum in cleaning position, the head will not stay on the floor. Is there a spring or something to apply pressure of the head to the floor? Can I fix this?

The weight of the brush in the front should keep it on the floor. The hinge may be full of dirt and needs to be cleaned out to ensure freedom of movement. ... Bissell Prolite Multicyclonic Bagless Upright Vacuum Cleaner

I have an Easy-Flo central vac unit. The handle on the electric hose has a switch on the handle. With the switch on ''O'' in the center, it's off. On the left, is the ''I'' position. The vacuum runs but the power brush doesn't. On the right is the ''II'' position. The switch won't flip that way. It feels stuck. It feels as if there is something underneath of it that won't let it push that direction. I have the switch out of the handle, but I can't seem to get the actual black casing around the

Switches are not usually designed to be dissembled.I would strongly suggest that you dont take the switch apart. you are better off getting a new one. then if you feel like it you can take the old switch apart and if it dosnt work you still hav ... Vacuums

My Dyson DC25 got stuck and wouldn't return to the upright position, I figured out that one side had jumped the track and gotten stuck in the square hole below the track. I did not want to break the plastic to force it back, so I removed the screw on the right side that was holding the kick stand on and removed the kick stand, also a spring thing came out. Problem is, now I have no idea how to re-install the kickstand. Can't find a technical manual or video anywhere, it can't be very difficul

... Dyson DC25 All Floors Bagless Upright Vacuum

Wheels stuck. The wheels are stuck in the up position.

Try wd-40 , always work for me... ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

The cleaning head of the vacume does not lock into position when I pick up the vacume, therefore when I raise the vacume th cleaning head just lays down.

The mechanism that locks the head into place is broke. Prob a plastic tab that broke off from so much use. ... Vacuums

Pushed button on small vaccum head shut off vaccum can not restart

... Hoover Fusion Plus Cyclonic Upright Vacuum Vacuum

Handle relase stuck in upright position and I have the vacuum apart and I dont know what to do what am I looking for it is still stuck

Dirtdevil vacuums are so cheap. it's jammed. just go to a vacuum shop and get it repaired ... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

I checked the belt and it has not broken, but when I start to vaccum the spinning head stops, and I start to smell a rubber smell...Do you think I need to replace the belt, I did get some string caught in it the last time I vaccummed, and it did stink like rubber then also...

Yes you do need to replace the belt they stretch out. Think of a belt like a big rubber band if you were to stretch it out and hold a lighter to it the rubber band would stay stretched out. That is the same thing that happen ... Bissell Vacuums

Release button Where is the release button to adjust the vaccum from its upright position, so I could vaccum carpet?

There is no button. You are supposed to place your foot on the area above the rolling brush and hold the base down while pulling the handle back.There is a small metal clip under the vacuum that you should bend out a bit to make it easier to re ... Euro-Pro UV209 Upright Vacuum

The shut off switch is stuck to the on position

This sounds like you have an internal problem with the electrical switch. I would recommend you take it to a vacuum dealer who has experience with this model. This is a relatively simple reapir for a pro shop to handle. ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

Electrolux telescopic wand stuck in up position

... Electrolux EL7020A Oxygen 3 Ultra Canister Vacuum Cleaner Bagged Vacuum

My hyla vacuum cleaner head is stuck; how can i reset it?

... Vacuums

The handle on the dyson dc25 is stuck in the down position wheels will not lower

... Dyson DC25 All Floors Bagless Upright Vacuum

Sebo X4 stuck in lowest position

... Sebo Automatic X4 Blue

Where can i find a replacement vaccum head for

... Kenmore Magic Blue 24195 Bagged Canister Vacuum

Stuck in incline position

Hi.If you look at the front left side of machine there is a removeable inspection port it will have 2 coloured buttons you press these in & pull it up to remove.Now pull handle back as if vacuuming the floor. Now where the ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Hoover mocel U5182-900 stuck in storage position

... Hoover Vacuums

Carpet head on Kirby upright is stuck up high

Remove the nozzle and remove the front wheel shaft. Take these 2 screws out. When doing so - watch for the spring that is under the top pedal, ... Kirby G4 Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1764 seconds