Having problems with your Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum ?

Can i reverse suction on DC08

\015 I want to fill up some bags to gain some space in my closet and i need to reverse the suction of my vacuum\015

Answers :

Hi there,

Your DC08 is not designed to be used as a compressed-air blower, and we'd advise against attempting to use it for this purpose as it may cause damage to the machine.

If this is not what you meant, please email me with further details at [email protected], as I may be able to help.

Alternatively, if you'd prefer to speak to one of our advisors in person, please call our Helpline on 0800 298 0298 (UK), or 1-866-693-9766 (US).

Best wishes,

Jack
Dyson Online Customer Support
http://www.dyson.com
Repair Help & Product Troubleshooting for Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Can i reverse suction on DC08


Hi there,Your DC08 is not designed to be used as a compressed-air blower, and we'd advise against attempting to use it for this purpose as it may cause damage to the machine.If this is not what you meant, please email me with further ... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

Suction using dyson normally is fine,but when using tools its as if the suction has reversed and there is no suction for the tools


... Dyson Vacuums

Reverse Suction My machine is blowing out instead of suction.


You have a clog either at the inlet by the brush roll or in the hose. Pull the hose and check for suction at the end of the hose, If it is ok there, then you have a clog from where the hose hooked into and the inlet at the bottom. If at the end of ... Hoover U5507900 Elite Rewind Bagless Upright Vacuum

Suction on my dc08 is very poor when turbine head is attached - no problem when not. I have cleaned the brushes an ensured there are no blockages. Why the loss of suction when using turbine head ?


Please go to the web page www.dyson.com and go next http://www.dyson.com/support/help.asp?article=1468&product=DC22-TURBINEHEAD-USand fix it. with commong sense.God bless you ... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

Hi. I have Dyson dc08 hepq+. Thet problem is its not having suction .I checked inside the pipe and foot , ery thing is fine. And if i take the whole dirtbin out ...machine workes fine. when i put ery thing back ....as soon as i start it , after 2 second machine change its voice...and loos suction. I think its just happen because ...the saftey yellow valve inside the machine turns up because the dirt drum is blocked inside some where. Any suggstion ...what can i do with it. I m tahnkful in avance


Hi its Darran at Dyson.From your description of the problem, it sounds as though the bin inner is missing. To confirm this, if you remove the cyclone and bin from the machine, then separate the 2 pieces as if you were going to empty it, w ... Dyson DC08 Hepa Allergy Bagless Canister Cyclonic Vacuum

My dyson dc08 has no suction when i put the canister back on, however i can feel the suction without the canister on. why is this doing it and do i need to replace this unit. I have thouroghly cleaned the filters.


It sounds like the motor is functioning properly and the filters are fine. Check very thoroughly for clogs in the parts after the canister (down where the brush is, etc.) ... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

Suction Problem I took my unit to my work and used it, when I returned home it wouldn't suck up anything. I took the recovery take out and it has inward suction. Shouldn't that be outward, so it goes into the tank? It also blows out of the bottom by the brushes. I check the filter in the bottom and that is fine. Is it possible that it is somehow reversed the direction of the air flow (rotor running backwards)? I am perplexed. What am I missing?


There is a stand pipe seal where the bucket sits on, and if it isn't there or out of place could cause a suction problem like you said yours is doing. In the picture it is #10. The motor seal may have gone bad and is leaking # 15.\015\012 ... Hoover F7220900 SteamVac V2 Upright Vacuum

Loss of suction in dyson dc08 - Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum


Hi there,If your DC08 doesn't seem to be picking up as well as usual, there may be a blockage in the machine. The filter may also need a wash.The easiest way to locate and remove any blockages is to follow the steps shown in our onlin ... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

Vacuum seems to have reverse suction


... Riccar 8955 Upright Vacuum

I have an air matress with no air pump.but i have a vacuum how do i reverse the suction on it


... Bissell Cleanview Helix Deluxe Bagless Upright Vacuum Cleaner 21K3

Wheres reverse suction


Uprights don't normally have a reverse suction. ... Dyson DC25 Animal Bagless Upright Vacuum

DC08 Dyson bagless VC suction very weak any ideas to the solution


You have pet hair blockage in the hose line or in the piping to the bag or right at the bag entry its very common,remove the hose if possible and look thru it and see if theres blockage,then dismantle any of the unit going to the collection bag as mu ... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

Dyson DC08 turbo brush won't turn but have suction in tube


Hi Cathy,I'm sorry to hear you're having difficulties with your DC08's turbo brush. As you've already checked the machine for blockages and washed the filter, I'd encourage you to get in touch with us directly so we can provide further assist ... Dyson DC08 Hepa Allergy Bagless Canister Cyclonic Vacuum

No Suction Steamvac only blows air out how can I reverse this


It should **** back up the water as you move along.It seems like you have a suction leak or it is plugged with debris.I would take it apart and clean. ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Dirt devil upright plus reverse suction - Dirt Devil Vacuums


... Dirt Devil Vacuums

Vacum cleaner has poor suction - Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum


Hi there,I'm sorry to hear your DC08 isn't picking up as well as usual. This may be due to a blockage in the floor tool, wand or hose, and the filter may also need a wash.To locate and remove any blockages in the machine, please follo ... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

Relief valve? can you help have a dyson dc08 great machine but keeps popping and suction's reduced as if a relief valve has opened swich off then ok again until you make it pop again does this more if your using just the hose no attachments cheers pete


Hi,\015\012\015\012I had the same problem with my DC08. What I had found is that cleaning the main washable filter will remove the problem. I have a log fire at my place and I have found that the vacuum does not like the dust from the f ... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

Dyson vacuum cleaner model DC08 lost it's suction


Hi Noel,I'm sorry to hear you're having difficulties with your DC08. If the machine doesn't seem to be picking up as well as usual, there may be a blockage somewhere - the filter may also need a wash.The easiest way to locate and remo ... Vacuums

Dyson DC08 Poor suction Even after filters are cleaned,no pipe blockage,no splits Thanks Anne


I managed to take the cyclone apart. here is some help with what i did I hope this helps. You will need a philips and torx screw drivers. Especially torx with T - handles and thin shaft makes the task much faster and easier. \015\0121. first ... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

My DC08 dyson doesn't seem to have the suction it used to have, is there anything I can do to get it back


Poor suction is almost always caused by a blockage of some kind. You need to check all the pipes and hose, and remove any obstruction. You also need to check the filters - particularly the washable filter - and make sure they're clean. If you wash th ... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

My dyson dc08 has a loss of suction. A flap valve operates within a few seconds of startup which appears to divert air. I have replaced both the hepa and sponge filters but the problem persists. If there is another blockage where might it be? I cant see how to dismantle the airways to check more than the very obvious. Suggestions gratefully accepted.


You have used your Dyson too long without thorough cleaning - Here's how. Obtain a torx screwdriver, or a set of torx bits, you will need to select the correct size when you come to remove the screws. They are all the same, so you will ne ... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

My son used my upright Hoover to vaccum without a bag in it and now the suction is very weak. Is it ruined? If not, what can I do to reverse this?


It will be okay im sure..Needs to be cleaned out ,remove debris from all hoses to cure... ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

No suction on my Dyson canister vacuum. - Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum


Hey,I see this problem is more frequent..I'm guessing your dyson 'sounds' blocked.See my solution:http://www.fixya.com/support/t4547920-loss_suctionThis fixed mine right up.It was not working well at ALL, so i open ... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

Very poor suction - Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum


... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

Why does my oreck pro12 have reversed suction


Belt may be on backwards ... Oreck Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0319 seconds