Having problems with your Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum ?

Is it possible to disassemble a Dyson floor tool/head please? (Not the turbine head!-the duel floor head!)

\015 Hi,\012Does anyone know if its possible to dismantle the duel-floor head tool? (Specifically for the dyson DC08)\012Pic here-\012http://www.dyson.com.au/store/partsDetails.asp?part=ACC-FTOOLDC08-SS&product=DC08-ORIGIN\012\012Mine has a blockage inside which I can see but can't get to.(Hair etc >.< )\012Any advice appereciated! : )\015

Answers :

Take the head off then take to the nearest garage and use there vac to **** it out or the blow it out with there compressor.
Repair Help & Product Troubleshooting for Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Is it possible to disassemble a Dyson floor tool/head please? (Not the turbine head!-the duel floor head!)


Take the head off then take to the nearest garage and use there vac to **** it out or the blow it out with there compressor. ... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

How do I disassemble a Dyson floor tool/head please? (The duel one for hard floor & carpets)


Start by turning the head over. I have marked the 3 points you need to undo to take off the base plate. Simply twist the 2 knobs and slide other catch in the centre of the head. The base plate should now lift off quite easily. ... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

We have a Dyson stowaway DC20 Turbine and the turbine head is not spinning at all.Can you please advise if this can be fixed and how. Thankyou from, Bev Effern 0411 018 531


Are the pins at the connection between the wand and head damaged? Has the turbine been verified that there is not blockage? ... Dyson Vacuums

Dyson mini turbine head - Dyson DC11 All Floors Bagless Canister Cyclonic Vacuum


Hi there,I can't tell from the information provided what sort of issue you're having with your mini turbine head, but you may find our support guide of use in resolving any difficulties: ... Dyson DC11 All Floors Bagless Canister Cyclonic Vacuum

I have a dyson DC23 and the turbine head will not turn anymore can anyone help on how to reset. I have cleaned it and there is no blokage its just stopped? Please can someone help


Pull the plunger into the ''out'' position for vacuuming carpets.For vacuuming hard floors push the plunger into the ''in'' position to stop the brushbar spinning.Refit the tool onto the ma ... Dyson DC23 Bagless Canister Cyclonic Vacuum

Disassembling cyclone assembly on dyson dc 23 turbine head


... Vacuums

My DC 26 turbine head keeps stopping - Dyson DC25 All Floors Bagless Upright Vacuum


... Dyson DC25 All Floors Bagless Upright Vacuum

Dyson DC25 head will not lift off floor - Dyson DC25 All Floors Bagless Upright Vacuum


... Dyson DC25 All Floors Bagless Upright Vacuum

Dyson ball head wont sit flat on floor - Dyson DC25 All Floors Bagless Upright Vacuum


... Dyson DC25 All Floors Bagless Upright Vacuum

Turbine head of my Dyson DC08 does not spin


This response is likely too late coming, however for others the problen appears to be the same as the fault with my turbine head which was that the turbine fan had become loose on its spindle. With no pressure on the brushes, friction would allow the ... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

Dyson dc25 animal - head won't stay on the floor - doesn't seem to be rotating correctly


... Dyson DC25 Animal Bagless Upright Vacuum

I have a Dyson dc 20. turbine head not working(not the


... Vacuums

Dyson DC25 Animal Cleaner Head Stays Off the Floor


Hi there,I'm sorry to hear you're having difficulties with your DC25. I'm sure we can help resolve this - please give us a call free on 1-866-693-9766, or email us at [email protected] so we can provide assistance.Best wishes, ... Dyson DC25 Animal Bagless Upright Vacuum

Turbine head Dyson DC39 The turbine does no stay on consistently


... Dyson DC39 Animal canister vacuum cleaner

Broken Dyson Our Dyson will not stand upright -- it falls flat on the floor as if the catch that keeps it up is broken. Any ideas for a quick fix before I send it in for repairs? Thanks, Please send any responses to; [email protected]


Hi, I went to the Dyson site, searched for the problem AND found the solution -- to hold a button while lifting the rear of the machine up and it clicked back into place. I knew there was a button somewhere but there are soooo many buttons!!\015\012\ ... Dyson DC07 Bagless Upright Cyclonic Vacuum

I have a Dyson DC 32 animal. The turbine head vibrates and reduces in speed. I have cleaned the head and the drive belt is still in place but the vibration still persists.


... Vacuums

Disassemble dyson dc24 - Dyson DC24 Ball All-Floors Upright Vacuum Cleaner


... Dyson DC24 Ball All-Floors Upright Vacuum Cleaner

Dyson dc25 head cleaner is loose - Dyson DC25 All Floors Bagless Upright Vacuum


... Dyson DC25 All Floors Bagless Upright Vacuum

Dyson Dco7 animal not picking up from floor. Checked all connection valves and cleaned filter and brushes. Also check tube for cracks and nothing there. Wand suction is great just almost non on floor section. Please help!


I would check the "U" shape tube under wand that goes under body of machine. There is a button to release it. I would also check to make sure that your brushes are spinning properly. When you tip the vacuum back the brushes engage. Carefully place yo ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

How to dismantle a dyson turbine head - Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum


... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

Dyson turbine head


Hi Kevin, Alec from VacuumSpot here. Unfortunately Dyson don't actually sell individual mechanical components to their turbine heads, so even though it is probably a pretty ea ... Dyson Stowaway DC23 Bagless Canister Cyclonic Vacuum

Dyson dc 23 turbine head is not spinning


... Dyson Vacuum Cleaner DC-23 Long Life Washable & Reusable Pre-Filter, R

Original upright dyson - cleaner head stiff/sticky and won't stay on floor


Hi Kirsty,I'm sorry to hear you're having difficulty with your DC07.If the cleaner head doesn't seem to be pivoting freely to maintain contact with the floor, we'd appreciate the opportunity to provide further assistance. If you give ... Dyson DC07 Bagless Upright Cyclonic Vacuum

How to pull apart dyson 29 turbine head


Hi Garry,Thank you for your question. We would like to provide further assistance but it would be difficult to provide all of the information in this space. We would appreciate the opportunity to discuss this over the phone in greater detail. ... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

Turbine head for dyson d23 had stopped turning


... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0753 seconds