Having problems with your Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum ?

HOW DO I CLEAN THE FILTER ON A DYSON DC08

\015 MANAGED TO LOCATE AND EXTRACT FILTERHOW SHOULD I NOW CLEAN IT?\015

Answers :

The 2 piece premotor filter can be washed with mild detergent & warm water ensure you leave it for at least 24hrs to dry. DO NOT FIT IF WET OR DAMP,
\015\012
\015\012The post motor filter can not be washed it must be replaced with new at least every 12 months.
\015\012
\015\012http://dysonmanuals.llc.nu/index.htm
\015\012
Repair Help & Product Troubleshooting for Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

HOW DO I CLEAN THE FILTER ON A DYSON DC08


The 2 piece premotor filter can be washed with mild detergent & warm water ensure you leave it for at least 24hrs to dry. DO NOT FIT IF WET OR DAMP,\015\012\015\012The post motor filter can not be washed it must be replaced with new a ... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

My dyson dc08 has no suction when i put the canister back on, however i can feel the suction without the canister on. why is this doing it and do i need to replace this unit. I have thouroghly cleaned the filters.


It sounds like the motor is functioning properly and the filters are fine. Check very thoroughly for clogs in the parts after the canister (down where the brush is, etc.) ... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

Dyson DC08 Poor suction Even after filters are cleaned,no pipe blockage,no splits Thanks Anne


I managed to take the cyclone apart. here is some help with what i did I hope this helps. You will need a philips and torx screw drivers. Especially torx with T - handles and thin shaft makes the task much faster and easier. \015\0121. first ... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

I have no power, I have changed the plug fuse so this is not the problem and I have cleaned all filters and emptied the cylinder. I have a Dyson DC08 animal (not the upright), can anyone help me?


... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

How do you clean the filter that is in the bas of the machine, I have a Dyson DC08 animal


... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

Dyson DC07 i have the dyson dc07 and i want to clean the filter but i have lost the instructions. does anyone know how to clean the filter or where i can get a copy of the user manual??


Http://www.analogstereo.com/dyson_vacuum_owners_manual.htm ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

How do you clean the filters on movel DC08


Hi There, \015\012I actually posted a blog about this on my website so rather than re-write it (and its long) click on the link \015\012 ... Dyson DC08 Hepa Allergy Bagless Canister Cyclonic Vacuum

I have the same problem as steve967 The dyson dc16 is fully charged, runs well for 5-10 seconds and shuts down. I wait for a second or 2 and it runs again for 5-10 seconds. This will continue for numerous cycles, until I am finished cleaning. I have cleaned all the filters, and the power is good, The system will just not stay on. It is just over 2 years old. A friend of mine had the same problem with his Dyson DC16 after just a couple of months and has replaced his Dyson with a Black N De


Dear Michael_Stad,I am going to sound like a broken record but here is my same answer to another person with the same problem.I have I had the same problem with my Dyson DC16, where it only runs for a few\015\012seconds at a t ... Dyson DC16 Root 6 Bagless Handheld Cyclonic Vacuum

How do i clean all the dyson dc08 - Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum


Hi its Darran at Dyson.A full blockage procedure can be found in your user guide or on our website at www.dyson.co.uk/support. I hope that you find this useful and should you require any further assistance with your DC08, plea ... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

Filter cleaning What do you clean the Dyson heppa filter with?


The best thing to do is use an air gun off a compressor to blast all the dust out, that is what i do with mine. ... Vacuums

I have a dyson alergy machine, I have emptied it, but I would like to clean the filter. I can't locate where the filter is or how to get to it to clean it. The manuel for this is not with the machine. This machine came with the house we live in. Could you help me please? Laurie


Greetings Irlawren3, \015\012\015\012It all depends on the model you currently have. The filters on some are above the motor and some are on the side housing. Its pretty clear looking at the unit where the filters are located. I would su ... Vacuums

Dyson DC 14 hose has no suction, with or without brush attachments. Hot air shoots out from the base of the canister when I try to use the hose. I cleaned the top filter, but can't figure out how to remove the hepa filter to clean it without destroying the case. It looks like it might take three hands to insert pennies and "flip" the case open as is suggested on a youtube video for a different model. Would this even help, assuming I could get the thing open?


... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Filter cleaning What do you clean the Dyson heppa filter with?


My understanding of HEPA specifications means that in order to maintain the levels of cleanliness a device described as "HEPA capable" means HEPA filters must be repalced not cleaned.\015\012\015\012If you have someone who suffers alegies ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

I had used Dyson DC08 to **** out a wet car carpet. A few days later when using the V/C, there was a burning smell. Subsequently I washed the flexible hose, changed the pre-filter and post filter , but I wrongly put the pre-filter in the spot for the post filter. When the V/C was next used, there was again a burning smell and sparks. The filters were switched, but the V/C would not re-start. What shall I do?


Hi there,We'd strongly recommend against using your Dyson to pick up water. If you haven't already got in contact with us directly, I'd encourage you to do so. One of our experts will be happy to recommend the best course of action. You c ... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

Dyson DC14 suction still poor after all cleaning and new pre filter set.


... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

I have a Dyson Animal DC 28. It vacuums fine on floor mode, but, when locked in the upright position it releases pressure though the little valve behind filter a. I have only had it for 2 weeks so I'm hoping the filters don't need to be cleaned this often! I would like to finish vacuuming without waiting 24hrs for the filters to dry.


Unfortunately with any bagless vacuum the filters do need to be cleaned or replaced very frequently for the vacuum to perform. But the good news is it sounds like you have a clog in the hose. remove the attachment hose as you would be using it and un ... Vacuums

I cleaned out my dyson ball as it smelt when i hoovered, cleaned filters, washed out canister and took the screws out of the front bar so i could clean near the brushes.. now its making a high pitched noise and when i switch it off it makes a noise like an engine shutting down! Have i disturbed the motor?


Hi its Darran at Dyson. The screws on the base of the cleaner head should not have to be removed to access the brush bar so it is possible that the brush bar has come out of alignment, hence the noise the machnie is making. Pl ... Dyson Ball DC24 Bagless Upright Vacuum

My Dyson D14 was used by electricians to clean up plaster dust when chasing out wiring! It has not worked properly since. My husband has twice taken it apart and cleaned filters carefully drying all


Hi there, it's Jack at Dyson.Our machines are designed and tested for standard domestic use only, and we do advise against using them to clean up large quantities of fine powders, such as plaster dust. It's possible that if the plaste ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

How do you clean filter for dyson DC05SLMUK0007


Click on the link below for the manualhttp://media.dyson.com/downloads/uk/floorcare/Manuals/dc05_gen_manual_uk.pdf ... Vacuums

My dyson d14 animal keeps cutting in and out. When it's on, the hole above where the filter is, keeps making a loud suction noise and it won't clean up hair and dirt.


Vacuum Cleaners require AIr-Flow. Your machine is not getting any air-flow. The noise you hear is a valve opening up to prevent your machine from overheating and burning out the motor. You probably have an obstruction somewhere in the machine. ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

How to clean Dyson vacuum hepa filter?


... Dyson DC18 all floors Bagless Upright Cyclonic Vacuum

Dyson filters smell after cleaning


Hi there,I'm sorry to hear you're concerned about your DC15.If the filter smells, you may want to take a look at the video below to make sure you're washing it as we recommend. Please use cold water without detergent, and make sure th ... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

Dyson dc7 quits after a few minutes running; runs again after an hour or two of rest. Filters are clean, beater bar is clean, can't tell about the airways because I can't see how to get to them.


Check the ducts with a small object(screw or something with a little weight)down the ducts to verify they are clean. Also check the Ubend on the back bottom of the unit. Looks just like a U. Remove with a turn of the tab by a screwdriver or quarter ... Vacuums

My Dyson DC07 is screaming load. I have replaced the lifetime filter and the hepa filters. I also replaced the clutch and brush. I took the canister apart and cleaned it. It works, but is so loud something else must be wrong


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Why does my dyson slim dc18 keep shutting down, even though i keep it clean. Filters area is clean and all others have been properly blown out with air from a air compressor. It will work for about 5-10 minutes and then shuts down. Smells like ****, check the belt and a bit later it restarts again. It's seems to be almost over heating.


Maybe your motor is going. Here's a link to a site that talks about motor failure and replacement in a DC07 (not DC18). I don't know exactly what the odor smells like but maybe you can see if you have any of the other symptoms. Good luck! ... Dyson Slim DC18 All Floors HEPA Bagless Upright Vacuum - Iron/Titanium/Yellow
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0551 seconds