Having problems with your Dyson DC08 Hepa Allergy Bagless Canister Cyclonic Vacuum ?

Cord getting stuck, won't come fully out.

\015 Hi\015\012My Dyson DC08 turbine is only letting me pull half the cord length out, it is as though it is coming out about 2 metres then getting stuck. It retracts back again ok.\015\012\015\012Many thanks\015\012Karen\015

Answers :

Hi Karen. Chances are your cord has a kink in it which is preventing it from coming all the way out. Pull the cord out almost as far as it will come and then twist the cord one way or the other and pull to get the kink out of it. Once you have it all the way out you can start closest to the machine and smooth out the entire cord to be sure that the kinks are more or less permanently gone.
Repair Help & Product Troubleshooting for Dyson DC08 Hepa Allergy Bagless Canister Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Cord getting stuck, won't come fully out.

Hi Karen. Chances are your cord has a kink in it which is preventing it from coming all the way out. Pull the cord out almost as far as it will come and then twist the cord one way or the other and pull to get the kink out of it. Once you have it ... Dyson DC08 Hepa Allergy Bagless Canister Cyclonic Vacuum

Cord stuck wont come out

Click on this link for fixhttp://www.youtube.com/watch?v=wO_dqcAxB7A ... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

No power. I was getting intermittent power with my miele s558 midsize canister, but it was predicated with me fiddling with the retractable cord to get it to come on and then not move the canister while I was vacuuming. Now I can get no power. I have taken it apart and can see no issues with connectors, cord, casings, etc. It all looks fine. It is about 5 years old and I have had no problems with it.

... Miele S558 Red Velvet Bagged Canister Vacuum

Miele Red Star model S314. Cord reel is stuck. About three feet of cord is out. The rest of cord is jammed inside machine? How do I get to where the cord reel is?

It is actually simple when I tell you, Here we go... \012\012First, open the lid and take the bag, and hepa filter out of the machine. \012\012With a slot screwdriver, pry the hinges of the bag door out a little and take the b ... Miele Red Star Bagged Canister Vacuum

I have a dyson DC07. The hose has come away from the hose end and the end is stuck in the top end of the wand as it sits in the upright position on the machine. Any ideas as how to get it out? If I can get it out it might just be a new hose. If not, it's a new hose and wand.t

... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

Roomba Discovery Roomba is fully charged and cleaned with sensor wiped clean. When turned on it it sounds normal and commences to go, but it then acts like it is putting on the breaks, spins, tries to go and manages a short distance and breaks again, just not making any progress because it keeps breaking after a foot or so and turns and tries again. Sometimes is gets so stuck from moving forward at all, like it is stuck in one spot just trying to go while seemingly surrounded by barriers. Somet

I had the same back-up, turn, move forward a couple inches, backup-up, etc. problem. Try cleaning/cutting the hair, etc. out from around the brushes, as well as around the ends of the brushes. Also, try a Q-tip to clean out the four pair of sensors ... Roomba Robotic Floor Bagless Vacuum

My bissell brush band has come off and wont stay on thus the brush will not turn, there is also a black arm type thing on a spring inside (on both sides) on the pump belt side it has broken - the side where the brush belt is, help im searching for parts and a way to fix it but im getting no joy, incidentley the brush belt thickness looks way to thick for the small thickness for the brush belt cog (?) to stay on........am i missing something? so i need to get the arm thing replaced plus find a

... Bissell ProHeat Deep Cleaner Upright Vacuum

Hoover rewind cord stuck

... Hoover WindTunnel Pet Rewind Upright Vacuum

Bissell aroma pro upright carpet cleaner wont push foward keeps getting stuck

... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum

Hoover UH70210 retractable cord stuck, how can I get it unstuck

... Hoover Vacuums

The cord is stuck on a Kenmore Elegance Vaccum. How do I get into the unit?

... Kenmore 22312 Bagged Canister Vacuum

I have a silverrodo and can't get the cord to fully rewind is there a way to fix this? thanks

It's probably a worn out spring. You'll probably need to take it in to the local Aerus Electrolux shop for replacement of the spring, and possibly the entire cordwinder. You can also call them and see if they're close enough for free pick up and de ... Electrolux Vacuums

Eureka the boss upright bagless vacuum. how do i open it to get to the belt area? the brush seems stuck. it wont move

Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=801547\015\012Generic problem for all Vacuums\015\012Eureka the boss upright bagless\015\012 ... Vacuums

Wand i can not get the wand out. It is suppose to be a quick draw it wont even budge i had 3 people pulling on it and still will not come out. help

I just took my DC17 apart to determine the problem (noted above). Basically it seems like there is a 'nub' on the lower part of the extension wand. Actually, there are two on either side, one higher (white, facing the back) than the other (black, fac ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

My electrolux oxygen canister cuts on and off. I have to open and close the vacuum, or take the base of the hose off and then re-insert. I have to do all these things before it will start up again. I sometimes shake the hose around, then it will come back on. If I try to dust with the dust brush (like a lamp shade or shelf) and the suction pulls against the object, the vacuum goes off for awhile. Sometimes I'll have to reset the vacuum by unplugging the electric cord. I never get to finis

Maybe you should have taken it back to that shop, it appartently isn't fixed. I would have replace that board, don't believe in modifing, you usually end up with other problems, like you have. One thing to check is maybe you have a partial clog in ... Vacuums

I disconnected the Kirby vacuum to blow out and clean under my refrigrator, when I put it back it wont come on, don't seem to be getting any electric.

Make sure your electric plug is still in place ... Vacuums


... Dyson DC27 Bagless Upright Vacuum

Water wont come out when handle pressed to do floor or out of nozzle for upholstery cleaning smells hot when trying to get it to work could this be a belt

Yes it most likely is the belt ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

I have got metal numatic tubes that are stuck but wont come apart

Actually there is a solution. \015\012\015\012If you try and pull the tubes out it wont work as its friction fit. However if you move them from side to side a little, keep wobbling and they will eventually loosen. This will work unless the tube ... Hoover Vacuums

We have had our Shark for 2 years. It wont produce steam. We plug it in and the green light comes on. The tank gets luke warm to touch. But no more steam....

Hi,The heating element has gone bad.... 2 years is a long time for one of those things... from the volume of questions here many do not last nearly that long...\012Here is a tip that I wrote about the Euro-Pro Sha ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

Roomba wont stop going in circles,code 9 comes up, cleaned front caster wheel to no avail. 500 series roomba. called company said we need a new one, if this is the best we can get out of a roomba they are junk.

\015\012\015\012Your bump sensors are malfunctioning. The best thing to do is order a repair kit. I ordered mine from EESolutions.ca and it worked great.. ... iRobot Roomba 560 Robotic Vacuum

The steam gets stuck and won't come out of the mop head

\012\012\012Hi,Here\012is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it\012may not be getting steam to the head... ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

My kirby is shorting out when i plug it in and turn it on it wont turn on and then after a little bit it will turnon but twhen you move it it will turn back off.. and there were sparks from the cord.... i was wondering if i still have a warrant to get another one ive never had a problem with my kirby i love it but am dissapointed that i cant use it

... Kirby G5 Bagged Upright Vacuum

I just purchased a Sebo Airbelt D canister vacuum. I plugged it in and used it for ten seconds then turned it off, retracted the power cord and now cannot get the power cord out of the machine. Did I not spend enough money to get a quality product? Does anyone have any idea how to get the power cord out without breaking the machine?

... Vacuums

Barrel Dyson DC08 Origin cord rewind button is stuck.

... Dyson Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0609 seconds