Having problems with your Dyson DC11 All Floors Bagless Canister Cyclonic Vacuum ?

My Dyson is blowing not sucking, can you advise me on how to fix this?


Answers :

Why or what was its last point of working,4 example did it start this after u had taken it apart to clean it? if so cheak the seals , if not that try taking it apat & unclogg & try that.
\015\012thank.
\015\012 life's handy man
\015\012 let me no
Repair Help & Product Troubleshooting for Dyson DC11 All Floors Bagless Canister Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Dyson is blowing not sucking, can you advise me on how to fix this?


Why or what was its last point of working,4 example did it start this after u had taken it apart to clean it? if so cheak the seals , if not that try taking it apat & unclogg & try that.\015\012thank.\015\012 life's handy man ... Dyson DC11 All Floors Bagless Canister Cyclonic Vacuum

Model number f 5912-900 hoover steam vav with clean surge.This is not the f5914 model........my new machine has 10 min. on it...in mid use it has stopped sucking and now is blowing more than anything, I took the front clear piece off as well as the black cowling/shroud and can find no obvious hoses to un-clog nor anything else to un-clog for that matter...I am looking for advise to fix this thing now, myself


Here is a list to go by for no suction problems that you can follow along with they are common proble\015\012Problem #1 Steamvac is not Sucking!If your Hoover Steamvac was working properly and suddenly it is not sucking any ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

My vacuum is blowing out instead of sucking in. It's blowing the cover of the hepa filter right off! What is causing this problem and how can it be fixed?


HelloPossible clogged hose.Run a broomstick or long pole through the hose to unclog it.Then check your prefilter should be down by the front light,should be washable.Last... be sure the hepa filter is clean an in the rig ... Eureka 4870SZX BOSS SMARTVAC PET LOVER Bagged Upright Vacuum

Brush stopped spinning from fabric being sucked into it, how can I fix it? It's a Dyson animal vacum. The belt is not moving from the lower motor.


Turn upsidedown.\015\012There should be 3 plastic screws in a triangle shape.\015\012Loosen, but do not attempt to remove the screws.\015\012This will release a shield that will expose the brushes.\015\012Carefully remove the ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dc01 dyson why is my dc01 blowing air rather than sucking


... Vacuums

My dyson is not sucking well. despite cleaning and making sure hoses are free of blockage. the little airvent at bottom is making a funny sounf onless icoverit with my hand. it then sounds fine but only for a few seconds. how can i fix this?


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

The powerhead on my dyson turns off and on while using it. I think it has a loose connection any advise on how to fix


Have you pressed reset button? that fixes the problems most of the time when power heads fail. ... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

The vacuum does not **** in dirt. It is blowing air instead. Yet when I disconnect the vacuum from the cannister, the suction seems very strong. I took it to a vacuum repairman, and he said that Kenmore sucks and I might as well get rid of it. (He wanted to sell me another one) It is 10 years old, but if I can fix it I would like to try.


... Kenmore 22613 Bagged Canister Vacuum

My dyson is starting to blow out the dirt/dust leaving an burning smell, i've checked the belt which is fine, i've cleared all blockages, can you advise


... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

We have a Dyson stowaway DC20 Turbine and the turbine head is not spinning at all.Can you please advise if this can be fixed and how. Thankyou from, Bev Effern 0411 018 531


Are the pins at the connection between the wand and head damaged? Has the turbine been verified that there is not blockage? ... Dyson Vacuums

I posted my problem earlier today that I was having with my Bissell Little Green Machine not dispensing solution, but sucked up no problem. Someone said that the most common problem was a blockage. We put hot water in the reservoir for 15 minutes as advised and it still will not dispense. The fluid is now ''dribbling''so it is better. It is just not spraying. We are able to blow from the end and make bubbles in the reservoir which shows us it is not blocked. Any other suggestions?


Okay. I fixed this on mine. Undo the screws on the handle, right by the trigger. You pull the tubes off the little valve. Push on the button and see if you can blow through the valve. If not, push a pin around in the valve (with it pushed into the ... Bissell 1720-1 Little Green Wet/Dry Vacuum

Hi i have a dyson which appears to be blowing out instead of sucking in air....is there a switch i need to adjust?


This could be the  cyclone in the bin if it upside down or missing this can make the unit blow outwards it is common for this to happen i have known people to throw it away when they empty the bin if your not sure the google a picture of your un ... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

My dyson dc animal's brush is not spinning. The machine smells like burning rubber. I believe the clutch has gone out but the machine also only sucks from the top of the hose in the handle. I am wondering if the machine is not locking properly which is causing the brush to not need to spin. If this is the problem how do i fix this problem.


... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Dyson blowing instead sucking - Vacuums


... Vacuums

How to fix Bosch vacuum cleaner that blows instead of sucking


... Bosch BSG81360UC Premium Electro Duo Canister Vacuum Cleaner - Red

Dyson dc24 - just tried to use after being in storage, making loud noise and seems to be blowing out rather than in. Maybe a part missing? The hole at the top of the bin attachment is sucking air in.....should something be there to stop this?


The wand attachment at the top is supposed to only suck in when it\\'s in the upright position, otherwise the suction should be used when the vacuum in rolled on the carpet/wood/surface.If it\\'s still under warranty, contact Dyson directly. ... Vacuums

I have a shopvac 5 gallon model 86m200 without blowing outlet, it is blowing and not sucking


... Shop Vac Shop-Vac& Mini Hang Up Wet/Dry Vac Vacuum

My Dyson turns on and is not sucking. It makes a


I have the dyson dc 27. On the bottom left back side of mine there is a circle, and ball inside of it. I turned it on and pushed the ball and it started working again. Sometimes it doesn't cover the whole and stops sucking air through it. ... Dyson DC07i Bagless Upright Vacuum

Dysin vacuum blows air instead of sucking it!


If it is blowing air, then it is still clogged up somewhere, you didn't give your model number, but some of these have removable covers on each side and on the back. Also make sure that all covers are back on securely. ... Vacuums

Dysin vacuum blows air instead of sucking it!


Dysons aren't supposed to clog up, but they do. There a number of ports you can open to see if there are clogs in any of them. Usually a clog is why it will blow air and debris out instead of sucking. You just need to find it. ... Vacuums

Oreck XL is blowing air out rather than sucking dirt in.


... Oreck XL Ultra Bagged Upright Vacuum

Do i need a neww vacum,my dyson dc24 ball not got any air pressure to suck any dirt up


Hi there,I'm sorry to hear you're having difficulties with your DC24 - however, I'm sure we can help you get it working again. If the machine isn't picking up as well as usual, there may be a blockage in the machine, and the filters may need ... Dyson Ball DC24 Bagless Upright Vacuum

The suction in the hose of my 2 year old Dyson Animal vacuum is compromised. I may have sucked up a small cat toy or something. Regular vac still is fine. The hose "sucks closed" after a few seconds near the top. I love my Dyson! Please help.


Hi there, it sounds as though the wand handle is blocked. To test this, remove the wand handle from the hose and test the suction at the top of the hose. If its strong here, then you will need to remove the blockage from the wand handle. If the suc ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

My shop vac blows and doesn't ****! I put the hose on either hole and it blows dirt all in my house. I'm trying to vacuum. I can't find a switch to change it from blowing to sucking and if I put the hose in either hole it just blows.


... Eureka 2812 Wet/Dry Vacuum

Oreck 9100 Xl blowing out dirt instead of sucking in. Took apart,cleaned & checked belt


... Oreck XL Ultra Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0663 seconds