Having problems with your Dyson DC14 All floors Bagless Upright Cyclonic Vacuum ?

Dyson vacuum cleaner-brush bar is frozen

\015 Brush bar won't turn. Is it the belt? How do I repair it? It's only about 6 months old...\015

Answers :

Hi\015\012If your Dyson has a brush protection design - i.e. roller bar on the top of the hood on the left hand side then the DYson can't be repaired by you- serviceman or professional care can replace it. \015\012
\015\012However if the Dyson doesn't have the roller bar on top of the hood, flip the machine over so that the beater brush is facing upwards, locate three/four screw heads that can be undone with a coin and remove the sole plate assembly. This should give you a clean view of the brush bar, drive belt and dirt channel. Ensure everything is clean espcially if the brush bar has lots of hair or threads tightly corded around. Then locate the drive belt and check to see if it has snapped. Grasp the beater bar gently upwards and the belt and brush can then be removed. Fit a new belt on carefully and check the tension as it will be tight.
Repair Help & Product Troubleshooting for Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dyson vacuum cleaner-brush bar is frozen


Hi\015\012If your Dyson has a brush protection design - i.e. roller bar on the top of the hood on the left hand side then the DYson can't be repaired by you- serviceman or professional care can replace it. \015\012\015\012However if the Dyson ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

Dyson dc25 brush bar not turning - Dyson DC25 Ball All-Floors Upright Vacuum Cleaner


... Dyson DC25 Ball All-Floors Upright Vacuum Cleaner

Dyson dc33 brush bar wont spin - Dyson DC33 Multi floor Upright Vacuum Cleaner Blue- Refurbished


... Dyson DC33 Multi floor Upright Vacuum Cleaner Blue- Refurbished

My Dyson Blueprint bagless rollerball vacuum brush refuses to turn every so often. Everything is connected properly, nothing is clogged in the brush, the vacuum power is turned on and then the brush bar control is released, but the brush still does not turn.


... Dyson Vacuums

Motorized brush bar not turning on Dyson Vacuum


Apparent common failure is that either the thin yellow and or blue motor drive wires that run from the LH side of the vacuum where the "control board" is located down into the hinge / ball area become stretched and then fray and eventually break. Ha ... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

My dyson dc07 brush bar seems to be only spinning at half speed. Leaves three light streaks in the vacuum marks like somethings just dragging. Brush bar is clear and filters are clean. Seems like there's slipping somewhere.


The belt is stretch and so it is slipping on the motor shaft. You need to change the belt. Here is a link for the\015\012instructions on how to change the belt and a link for the belt you need: ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Non working roller brush on dyson dc25 vacuum cleaner


... Dyson DC25 All Floors Bagless Upright Vacuum

Dyson ball dc24 the brush bar is not turning - Dyson Ball DC24 Bagless Upright Vacuum


Hi its Darran at Dyson. With the machine switched off, press the re-set switch on the side of the head, making sure you push the button in as far as you can. When you switch the machine back on and lower it into the vacuuming position, th ... Dyson Ball DC24 Bagless Upright Vacuum

Got a Panasonic Eco max vacuum cleaner model mc-ul952.Brush bar does not rotate when switch set on ''carpet'.Brush bar clear....rotates freely by hand


... Vacuums

It.s anew vacuum cleaner Dyson DC24-ball one, bought only a few months ago..but the brush rallied normally only for a few days. We washed the 2 filters but the brush never started to roll. What should do?


Hi there, its Darran at Dyson.It sounds as though you need to re-set the brush bar. It can stop rotating if it becomes obstructed. You need to simply locate the red re-set switch on the side of the cleaner head and push this button righ ... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

I have a dyson dc14. the brush bar will not rotate when the vacuum is running. the belt is attached and it will rotate by hand. when you switch from bare floors to carpet-the bar will not kick in and rotate.


\015\012Hi,\015\012Check that when you pull back handle to vacuum the clutch control knob which is located front lower left side of machine moves to drive position & is not stuck in off or park po ... Dyson Vacuums

Dyson Dc 24brush bar will not turn - Dyson DC24 Ball All-Floors Upright Vacuum Cleaner


... Dyson DC24 Ball All-Floors Upright Vacuum Cleaner

Dyson dc30 brush bar not spinning - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

How to replace brush bar motor on dyson dc15 - Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum


... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

Dyson ball cleaner brushes wll not go round - Dyson Ball DC24 Bagless Upright Vacuum


... Dyson Ball DC24 Bagless Upright Vacuum

Dyson dc33 brush bar won't turn - Dyson DC33 Bagged Upright Vacuum


... Dyson DC33 Bagged Upright Vacuum

My brush bar wont engage on my dyson DC39 - Dyson Vacuums


Contact Dyson regarding the fault.\012There is a 5 year warranty on parts their customer service is amazing . They may send you a part to fit if faulty . ... Dyson Vacuums

Dyson dc 33 brush bar not spinning - Dyson DC33 Bagged Upright Vacuum


... Dyson DC33 Bagged Upright Vacuum

How to remove brush roller from Dyson DC44 - Dyson DC44 Animal Handheld Vacuum Cleaner


... Dyson DC44 Animal Handheld Vacuum Cleaner

Dyson dc27 noisy and brush bar not working - Dyson DC27 Bagless Upright Vacuum


... Dyson DC27 Bagless Upright Vacuum

Power brush on dyson dc 18 vacuum cleaner stop working


... Dyson DC18 all floors Bagless Upright Cyclonic Vacuum

Dyson vacuum cleaner brush won't turn


... Dyson Vacuums

Brush bar is not spinning - Dyson Ball DC24 Bagless Upright Vacuum


I would first check your filter as a dirty filter will sometimes produce this probIem. If that doesn't work take a look at the brush bar. I don't believe that these ... Dyson Ball DC24 Bagless Upright Vacuum

How do you remove the roller brush from a dyson vacuum cleaner


You will need a special bet tool. you can buy one from ebey. search for "dyson special bet tool" it is about $15. don't use your hands as the belt is very tight and you will hurt your fingers. ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Brush bar goes round but doesn,t **** up - Dyson DC07 Bagless Upright Cyclonic Vacuum


... Dyson DC07 Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0957 seconds