Having problems with your Dyson DC14 Animal Bagless Upright Cyclonic Vacuum ?

Dyson dc25 animal: cannot remove the telescope reach wand.


Answers :

The hose is getting twisted on the machine and so the wand gets stuck in the hose.
\015\012
\015\0121) Pull the wand out as far as you can - if you can pull it out completely, separate it from the hose and apply baby powder to the
\015\012metal rod. Stretch out the hose and unwind it. In the future, separate the wand and unwind/stretch the hose after use.
\015\0122) If you can't pull the wand out all the way, remove the canister/dirt bin from the front. Look for a gray button with 7 vertical
\015\012lines/grooves on it (it'll be just above the ball on the opposite side of the bottom hook that you wind the cable around).
\015\0123) Push the button and at the same time pull the hose out from the bottom by pulling on the hook - this will release the gray hose
\015\012from the machine. Take it off of the machine if possible (the bottom of the wand may stop you from doing so - if it does, try to pull
\015\012the wand out until you can release the hose from the bottom)
\015\0124) Pull and stretch the hose out and pull the wand at the same time - separate the wand from the hose and unwind the gray hose and
\015\012stretch it out. Rub baby powder on the metal rod of the wand and in future, disconnect the wand from the hose and stretch/unwind the
\015\012hose after every time you use the wand.
This worked for me, minus the baby powder. There was a small metal nail file stuck at the bottom of the hose!
Repair Help & Product Troubleshooting for Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dyson dc25 animal: cannot remove the telescope reach wand.


The hose is getting twisted on the machine and so the wand gets stuck in the hose.\015\012\015\0121) Pull the wand out as far as you can - if you can pull it out completely, separate it from the hose and apply baby powder to the \01 ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

My Dyson DC25 animal is having issues. I believe everything is working correctly except I have realized that the mechanism which switches the hose/valve between the wand and the vacuum head isn't working properly. The two gear pieces that move the hose placement aren't close enough together, so they don't work together. It looks like there is a washer that I could potentially remove on the clear gear piece which would allow it to sit closer to the assembly. Would that work? Currently I am


... Vacuums

I cant remove my wand on my Dyson vacuum. - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


Hi its Darran at Dyson. It is possible that if the hose is blocked that the wand handle may become jammed. For help releasing this, please contact our Helpline on 0800 298 0298 (UK) or 1866MYDYSON (US) and one of our advisors can talk yo ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Why won't my dyson DC07 Animal turn on when the wand is removed?


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dead motor I purchased a new motor for my Dyson Animal but I cannot figure out how to get the thing apart to replace it. There are weird star shaped screws but I can't even see how removing those would get me where i need to be. HELP!!!


Ace Hardware or Home Depot should have your star screws ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

I cannot get suction from my telescoping wand on my Dyson DC14 all floors.


... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

Dyson dc25 animal wand making high pitched noise


... Dyson DC25 Animal Bagless Upright Vacuum

Funny smell and telescopic reach not sucking - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


Almost certainly your machine has a blockage. Follow guidance in the operator manual. If you no longer have the manual, you can download a copy free from the Dyson website. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Cannot remove the wand. Appears to be stuck - Dyson DC27 Bagless Upright Vacuum


... Dyson DC27 Bagless Upright Vacuum

How do I remove screw - Dyson DC25 Animal Bagless Upright Vacuum


You must use a Torx tool to remove the screws. ... Dyson DC25 Animal Bagless Upright Vacuum

I have the Dyson Animal and I just bought it in January and my hose does not work. Mine you pull the hard part out and once it reaches the end it will click off of the top of the vacuum. I cannot pull it out. It is stuck.


Dyson have a two year warranty, they are a really good company and I would recommend calling them and asking them to fix the problem. Better that than trying to do it yourself and you end up breaking it and then invalidating the warranty. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

DYSON DC25 WAND AND HANDLE JAMMED - Dyson DC25 All Floors Bagless Upright Vacuum


... Dyson DC25 All Floors Bagless Upright Vacuum

Reset switch on the DC25 dyson vacuum - Dyson DC25 Animal Bagless Upright Vacuum


Hi there,Your DC25 is equipped with a sensor which shuts off the brushbar if something jams it. After you've checked the cleaner head for obstructions, and removed any threads or hair from around the brushbar, you should be able to reset the ... Dyson DC25 Animal Bagless Upright Vacuum

Dyson dc25 wand stuck wrong way in handle - Dyson DC25 Vacuum


... Dyson DC25 Vacuum

How do you replace a Dyson DC25 Valve Wheel - Dyson DC25 Animal Bagless Upright Vacuum


... Dyson DC25 Animal Bagless Upright Vacuum

Dyson dc25 roller bar works but no suction - Dyson DC25 Animal Bagless Upright Vacuum


Hi there,I'm sorry to hear you're having difficulties with your DC25. If the machine doesn't seem to be picking up as well as usual, this may be due to a blockage. The filters may also need a wash.The easiest way to locate and remove ... Dyson DC25 Animal Bagless Upright Vacuum

Dyson animal will not stand upright - Dyson DC25 Animal Bagless Upright Vacuum


Hi there,I'm sorry to hear you're having difficulty standing your DC25 Animal upright. It sounds as if the stabiliser needs realigning. This is simple to do - please follow the steps shown in the video below.If you'd like any further ... Dyson DC25 Animal Bagless Upright Vacuum

Dyson dc25 power switch will not stay on - Dyson DC25 Animal Bagless Upright Vacuum


I called Dyson because I had a similar problem. When I pushed the red button down on my dc25, but it would not stay down. The vacuum would turn on when the button was pushed down, but of course when I let go of it the vacuum would shut off. The help ... Dyson DC25 Animal Bagless Upright Vacuum

How to fit a new Dyson dc25 valve wheel - Dyson DC25 Animal Bagless Upright Vacuum


... Dyson DC25 Animal Bagless Upright Vacuum

Dyson telescopic wand


... Vacuums

Dyson dc35 can't remove wand


... Dyson DC35 Handheld Vacuum

My Dyson DC25 Animal vacuum head is not staying flat after pushing Red Release Bar.


... Vacuums

My dyson dc25 retractable wand won't come out


You need to untwist it check out the video belowhttp://www.youtube.com/watch?v=FJcNXrfQDVo ... Dyson DC25 All Floors Bagless Upright Vacuum

Dyson DC25 Animal Hose Not Picking Up


Hi Ben,I'm sorry to hear you're having difficulties with your DC25. From what you've described, it sounds as if there may be a blockage in the wand or hose. To resolve this, please follow the steps shown in our online Support guide: ... Dyson DC25 Animal Bagless Upright Vacuum

I have the dyson animal. There is something stuck in the wand tube and everyting is getting caught on it. There is very little suction from the wand. How do I get the wand apart or somehow get the object stuck out of the tube? Thanks


Yes, things stuck in vacuum hoses are not always as easy to remove as one might think. Trying to push it out with something can be counter-productive, and only get the thing stuck tighter! If you have a second vacuum, you can try sucking it out the w ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0534 seconds