Having problems with your Dyson DC14 Animal Bagless Upright Cyclonic Vacuum ?

Fitted new cluch and belts? hover making noise like something catching when you hovering? when cluch goes into automatic.??? any idears


Answers :

Did you say you switched the belts? If not I would try that. you can get them here:

http://www.vacbelts.com/dyson.htm
Repair Help & Product Troubleshooting for Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Fitted new cluch and belts? hover making noise like something catching when you hovering? when cluch goes into automatic.??? any idears


Did you say you switched the belts? If not I would try that. you can get them here:http://www.vacbelts.com/dyson.htm ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Dyson hi my dyson sounds as if something is catching when the brush goes round, it's very loud, it still has good suction. I have taken the plate of can't see anything or fell if there is anything obstructing the brush, could it be the belt?


Hi.\015\012If the brush turns freely then you will need A new clutch unit fitted to your machine.\015\012There are loads of them on Ebay very reasonabley priced only buy new not second hand.\015\012\015\012Manuals are availabl ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

Help Hi I have had my irobot roomba model 4000 now for 3 months now, I just LOVE it sooo much. I have used it everyday since I got it. But now it is not working. I cleaned it all out I even sprayed it with that air spray can. What happens is, It starts to go then it acts like there is something in the way and stops then goes the other way, then goes off. What is wrong? Please help!!!


I had the same kind of problem with my model 400 today...after starting it and having it go in a circle for 30 seconds or so it would finally run into something and then back up a few inches, turn, then go forward a few inches, then back up a few inc ... iRobot Roomba 4210 Bagless Robotic Vacuum

I need to remove the motor in my ricar 4812 (to change the axle) Where can i find something on that? I have 4 screws out- but it seems to be held into the body where the shaft goes out to the belt. Just missing something dumb.


... Riccar 4812 Vacuum

MY NEEDLE GOES DOWN TO PICK UP BOBBIN THREAD AND SEEMS TO HIT SOMETHING SOLID. IF I TAKE THE NEEDLE OUT IT GOES ALL THE WAY DOWN. pLEASE HELP


Hi,i think the problem is with the needle bar,the alighnment has been distorted internally,i think you should re-align the needle bar in order to restore your machine back to a normal working condition.\015\012\015\012\015\012Thanks and t ... Vacuums

Hi all---I have a Dirt Devil 091020V. there was a problem with the wand where it was the only thing sucking even when it was stuck in the tube it would ****--but nothing from the vacuum end--the diverter was stuck closed I took it apart and found something stuck but in the meantime the torsion spring [I think} fell out and I don't know where it goes--so now only the vacuum works --not the overhead cleaner part.. is there a digram somewhere that can tell me where it goes--I think it might b


... Vacuums

I have an L shaped piece of metal with a hole at one end that fell out of my hoover elite bagged upright vaccuum cleaner. I repaired the belt but don't know where this metal piece goes. I think it has something to do with the wheel assembly which is replaced and it seems to want to stay there. any thoughts


This metal clip was for the wheel assembly, but not always needed. you can diregard the part if your vac is working correctly with the front wheels. ... Hoover Elite U5061-900 Bagged Upright Vacuum

My 400 series Discovery Roomba will no longer charge. It shows a green "charged" light, but when I hit clean, all lights/vacuum, etc just go out and it stops. Irobot says that the entire unit needs to be replaced, but it has to have something to do with the charging mechanism. Any Ideas? I've tried the system reset, and removing/replacing the battery. No effect. The robot doesn't give me the "uh-oh" beeps to be charged. It just stops and goes dead.


... Roomba Robotic Floor Bagless Vacuum

A black plastic ring fell off underneath at the bottom left... looks like it goes around something... ? bissell steamcleaner


Plastic or rubber? If it's a rubber ring it's the drive belt for the brush cylinder and should be replaced. You can buy one online or at a hardware store. ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

The roller on my power head does not spin consistently. So my vac is not picking up of course. The square end pieces and the rod that goes into the wooden roller seem loose. I tried tightening it but it still is not turning. Can I do a fix with glue or something till I can get a new roller?


... Rainbow E series Canister Wet/Dry Vacuum

Hi, When changing to brush mode when hoovering, the hoover makes a terrible noise like something is catching


They all make that noise everyone i have ever used does this. Dont know why but has never effected the performance. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Roomba Schedular I have a Roomba Scheduler and it has worked great until recently. Suddenly it quit working. When it is charging the power light goes from red to green as it should, showing it is ready to use. When we turn it on to use, it will only go on for a few seconds then it shuts off like it is out of power. It is like it isn't really charged. Is there something I can try to make it work?


Let it charge for a full 24, or even 48 hours, regardless of the green light. If it still dies you probably need a new battery.. or worse. ... Roomba Robotic Floor Bagless Vacuum

When I attach my rectangle head ,steam will not come out, then when I take it off steam goes everywhere. It looks like something has melted in it.


Hi,You need to clean that hole out...Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head... ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

I have a Hoover Windtunnel U5472-940. The belt broke so I replaced it. Immediately the next one broke. The belt goes around the brush cylinder and a metal post. I think there is supposed to be something on the metal post to protect the belt but I can't tell from the owner's manual. I also can't find out if this is a part that can be replaced. I've only had the vacuum about a year and a half. Thanks


You may have something in your brush bearing that does not allow the brush to turn easily thus stretching the belt. Chris ... Hoover U6455-900 WindTunnel Vacuum

I bought a used vacuum seal machine (hobart model ht-120) it does excellent vacuum but it doesnt seal correctly all the time. it seems like there is something wrong with the valve that activates the bar that goes up and makes pressure and heats the bag for complete sealing. The heating is perfect but what is not working is what make the bar go up and down.


... Vacuums

Automatic pump I understand the concept. What is wierd is the place to hook up the waterhose is up high and on the outside of the Shopvac itself. Is there another spot to actually hook up the hose inside the shopvac? I can't locate my manual. I do see a hole in the bottom of the filter but there is not an actual place to screw something in there? Im I just being stupid?


Well that does sound strange but in theory if you hook up the water hose even up high when the water fills the reservoir it should run out while your vacuuming give it a shot and when you wet vac yo ... Shop Vac 584-06-00 Canister Wet/Dry Vacuum

Goes slightly forward and then backs, turns and tries again. As though it is hitting something in front of it


Take a can of air with the attachable tube and blow it into the underside near where the guard attaches. If you move this back and forth you will see some pivots underneat the the device. These pivots block the electronic eyes, which are clouded wi ... iRobot 1100 Dirt Dog Bagless Robotic Vacuum

Roller Brush How do I install the roller brush. I didn't pay attention when I removed it and now when I attempt to vacuum my low carpet it doesn't seem to be working. The green light on the head of the vacuum goes out when I click it down to the floor. It didn't used to do that. Plus I think I smell something burning. Could the belt be broken?


Try a new belt. The ends of the brushroller are different sizes, so you can't put it in backwards. There are numbers and notches on the ends of the brushroll. These notches/numbers need to match on both sides when installing it. (probably need b ... Kirby Ultimate G Bagged Upright Vacuum

It won't go forward or back. It just goes around in place. It's clean, it's charged. It's got dementia or something.


Hi,\015\012 \015\012Blow out the unit with compressed air, particularly around the wheels and under the bumper. Tap the bumper with your hand.\015\012Please check this bellow Link… ... Vacuums

I took apart the power end that goes into the canister to try and get a kleenex out. in doing so i revealed the brass? rings inside also the prong part was taken out. i thought i had everything back in the way it came out but now it will not turn on. is there a reset but or something? thank you


... Panasonic MC-V9644 Bagged Canister Vacuum

Roomba 530 clicks steadily as it moves, and has a limp, so something is catching inside it - inspection suggests not the brushes, not the wheels, so maybe the electric motor? Any ideas as to problem or where I can repair? Thanks. Bill


Symptoms suggest the clicking is coming from the wheel switch, and it must be disassembled and cleaned. ... iRobot Roomba 530 Robotic Vacuum

Not picking up as well as it use to seems to be blowing back out some lint and debris. Also when i turn it on after a second it goes to a different noise as if a hose is not connected right or something?


There seems to be a bad connection at one of the hoses or filters.\015\012Possibly a broken,or loose hose.Put some baking powder on the floor,\015\012and try vacumming it up,to see where the white smoke is escaping.\015\012Good luck ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

When we put our spot bot cleaner on automatic the cleaning solution does not come out. The machine goes through all the cycles but the area is completely dry with no solution passing through the brush.


Good afternoon,It sounds like the spray tip may be clogged. This is all referenced in the product/service manual located here: ... Bissell SpotBot Hands-Free Compact Deep Cleaner - Silver

I have a Series G Kirby Model G7D. The other day when I was vacuuming all of a sudden the TechDrive (Power Drive Assist N/D) pedal fell off. I see the hole that it goes into but when I put it in it's loose and falls out and doesn't control the power drive anymore. When I shook the vacuum I heard something rattling around inside the vacuum head. So I unscrewed the bottom and looked inside and found a small metal part labeled K3 on one side and T on the other side. It looks like it would fit


Hi, I have a Kirby G4 and i'v replaced the carbon brushes myself using a step by step guide however since its been back together it worked for about five minutes it then started sparking from the inside!!(a lot!!) I'v obviously touched something i sh ... Kirby Ultimate G Bagged Upright Vacuum

I am cleaning the hose to the underneath of the vacum. It is clogged. I need a picture from the manual to show how it all goes back in after i am done. I have a dirt devil quick power compact.. UD... something I have been looking for the manula online. unable to find it.


Go to the website below. Search for your product; either by model number of by type. When you find your model the parts page will also include a link to the manual.\015\012\015\012 ... Dirt Devil Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0265 seconds