Having problems with your Dyson DC14 Animal Bagless Upright Cyclonic Vacuum ?

The overload on my dyson cuts in after about five minutes,and I have to wait hours for it to reset? it is an upright about ten yrs old


Answers :

Check both your filters and make sure you dont have any cloggs. you have 2 filters, one premotor filter on the side or top of the canister. also check your hepa filter which is located underneath where the canister sits. Dyson claims this to be a lifetime filter but how can a filter be lifetime if its doing its job properly? if you dont have any clogs in the rear neck, hose, nozzle ect. It could very possibly be the motor has finally gave out, creating alot of heat and tripping out the reset. Since ive never seen any dyson last 10 yrs im leaning more towards the motor, but before you just assume go ahead and check, replace the filters and clear any clogs. let me know if you have any other questions or need a schematic for this model
Repair Help & Product Troubleshooting for Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The overload on my dyson cuts in after about five minutes,and I have to wait hours for it to reset? it is an upright about ten yrs old


Check both your filters and make sure you dont have any cloggs. you have 2 filters, one premotor filter on the side or top of the canister. also check your hepa filter which is located underneath where the canister sits. Dyson claims this to be a lif ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

DYson DC07 not sucking properly when in upright mode. I have tried cleaning out pipes etc and even tried an old motor section I had in garage (replaced once under warranty as kept cutting out and they left old motor section here). Even the old motor section had same prob so this suggests its something in the rest of the vacuum cleaner (whats left after you have lifted off the green motor section and dust collection area if you see what I mean? Any advice weclome please.


Blocked filters ... Dyson DC07 Bagless Upright Cyclonic Vacuum

DYSON DC17 ABOUT 4 YEARS OLD. I HAVE TWO FILTERS THAT I ALTERNATE BECAUSE AFTER 2 HOURS OF VACUUMING I LOSE SUCTION. I HAVE TO WAIT 3 DAYS FOR MY FILTER TO DRY BEFORE I CAN SWITCH THEM AGAIN. THE FIRST TWO YEARS I HAD THE DYSON I COULD GO A COUPLE MONTHS BEFORE CHANGING THE FILTER. WHATS WRONG?


Hi there! This is John from Jerry's Vacuum Sales in Modesto Ca. Are you using any type of carpet fresh product on your carpet? If so the fine powder is leaking onto the filters and causing them to clog. Discontinue use and over time the problem will ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

I have a Riccar R-200 upright vac. My wife ran it for an hour without stopping and a full bag. The motor cut off and the unit won't turn back on. Is there a fuse to reset in the unit if it overhe


... Dyson Vacuums

I have the same problem as steve967 The dyson dc16 is fully charged, runs well for 5-10 seconds and shuts down. I wait for a second or 2 and it runs again for 5-10 seconds. This will continue for numerous cycles, until I am finished cleaning. I have cleaned all the filters, and the power is good, The system will just not stay on. It is just over 2 years old. A friend of mine had the same problem with his Dyson DC16 after just a couple of months and has replaced his Dyson with a Black N De


Dear Michael_Stad,I am going to sound like a broken record but here is my same answer to another person with the same problem.I have I had the same problem with my Dyson DC16, where it only runs for a few\015\012seconds at a t ... Dyson DC16 Root 6 Bagless Handheld Cyclonic Vacuum

We have the dyson upright. my 10 yr old son left


Sounds like motor has either burnt out or siezed can be fixed by motor replacement ££££ motor alone is about £45 not a simple DIY job. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

How to reset beater bar on dyson dc 17 - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dyson, DC31 Animal, unit cuts off and light flashes, comes back on after I release and pull trigger but then cuts out again. Battery need replacing? Unit is 4 or 5 years old.


... Dyson DC31 Bagless Handheld Vacuum

Reset Button on my Dyson DC 25 Animal - Dyson DC07 Bagless Upright Cyclonic Vacuum


... Dyson DC07 Bagless Upright Cyclonic Vacuum

Thermal cut out on dyson - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson DC28 Where is the Reset Button? - Dyson Ball DC24 Bagless Upright Vacuum


Hi there,I'm sorry to hear you're having difficulty with your DC28. Please follow the steps shown in the video below to check the cleaner head for obstructions and remove any threads or hair from around the brushbar before resetting the machi ... Dyson Ball DC24 Bagless Upright Vacuum

Run cut off -run cut off every ten minutes - Dyson Vacuums


The TOC(thermal overload cutout) on the motor is getting too hot - thats why it keeps shutting off and starting again once its cooled, so make sure your filters are clean and they are no blockages in the hose or the brushbar compartment or any where ... Dyson Vacuums

Dyson dc07 cuts out after a few minutes ? - Dyson DC07 Bagless Upright Cyclonic Vacuum


There is a cut-out device on the motor which senses when too much current is being drawn, which in your case sounds like it is tripping because the motor is developing a fault and will likely fail completely soon.\015\012\015\012New motor ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson reset button - Dyson DC25 Animal Bagless Upright Vacuum


Hi there,DC25 doesn't have a reset button - if the brushbar isn't rotating, please follow the steps shown in the video below to check the cleaner head and brushbar for obstructions, then reset the machine.Please note, the brushbar wil ... Dyson DC25 Animal Bagless Upright Vacuum

I have a kenmore progressive direct drive handi mate jr. upright vacuum. My daughter used it last night to vacuum up some cat litter that had spilled on the floor. I went to use it today and it turned on for a second and then stopped working. I have hit the reset button but it will not turn on. Help this vacuum is only 2 years old Is there anything that I need to reset or do so that the vacuum will work again?


Its probably clogged up with cat litter.might have gotten into the motor.your motor has a motor guard inside if it. when it overheats it will shut down till it cools off.you need to clean all th cat liter out of it.and clean the filters.with a direct ... Kenmore Vacuums

Picture of reset button on dyson ball - Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum


Hi there,The advice on resetting your machine will depend on which model of Dyson Ball you own. If you have a DC15, you can reset the machine by following the steps shown in our online support guide: ... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

Dyson upright My Dyson cleaner suddenly screemed at me and stopped with a puff of smoke and burning smell. I had just emptied the cylinder. It is five years old.


Hi this is an expensive repair and would probably be cheaper to buy new one the problem you have is with the motor bearings seizing its expensive to repair because when dyson made thes vacs they were made so you need special tool to take them apart s ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Is there a reset button on the dyson - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


The short answer: No.\015\012The longer answer begins with a question: why do you need to know, what's happened to make you ask?\015\012Most Dysons have a built in cut-out system that stops the machine if it gets too hot. This usua ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

DOES THE DYSON ANIMAL HAVE A RESET BUTTON. - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


Normal\012 0\012 \012 \012 false\012 false\012 false\012 \012 \012 \012 \012 \012 \012 \012 \012 MicrosoftInternetExplorer4\012 \012\012 \012 \012\012\012\012\012\012 /* Style Definitions */\012 table.MsoNormalTable\012\011{mso-s ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Oreck Upright Hi Redev, I'm not sure what model I have (about 6 years old...upright, looks like the one in the picture). I changed the belt (which was torn) and then the next time I used it, it cut off on me. Now if won't turn on at all. (I turn the switch on and off and nothing happens as if it is not plugged in but it is!). I noticed at the top where the power cord enters the handle, it is all frayed. Could the electrical wires have detached? Anything you think I should check before taking it


The cord could be bad and will ahve to be replaced. It would have to have a problem inside the handle or down by the motor. ... Oreck XL2600 Vacuum

Faithful Sebo X1 upright, about 12 years old, stopped working today. I replaced old with new dust bag, checked all dust paths were clear, checked main brush was clear/clean, and drive spindle rotated OK with fingers. When power switched on, the two red indicators briefly flash on then off, but nothing more happens, motor does not start - even with power reaching machine. Tried removing all consumables, refitting and turning on a few times to reset, no joy. Removed base cover, both belts were i


At 12 years, this vacuum has had a good long life. I suspect the motor is shot, but it could be due to faulty wiring and connections. A bad switch, break in the power cord, and worn brushes in the motor are other causes.\015\012I recommend ta ... Sebo Automatic X1 Bagged Upright Vacuum

Today i was hoovering, and then my dyson just cut out! i left it a few hours then went back to it, it gave a little noise when i switched it on, then again i tried but it failed to come on! ive even changed the fuse in the plug! and now my dyson wont turn on at all, ive cleaned everything there is too clean! help! :D


It looks like you need a professional repair. If you're really lucky this may just be a break in the flex, or the switch has failed - both relatively cheap and simple to sort out. More likely, though, is a problem with the motor (carbon brushes worn ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Reset switch on the DC25 dyson vacuum - Dyson DC25 Animal Bagless Upright Vacuum


Hi there,Your DC25 is equipped with a sensor which shuts off the brushbar if something jams it. After you've checked the cleaner head for obstructions, and removed any threads or hair from around the brushbar, you should be able to reset the ... Dyson DC25 Animal Bagless Upright Vacuum

Dyson DC41 animal complete stuck in upright position - how do I get it down. Have been on hold with Dyson for hours.


The wheels are probably jammed and won't recline. Mine was stuck pretty bad, and after a half hour of trying to figure it out I just picked up the vacuum and slammed the wheels pretty hard, and it came loose. No problem since. Pushing on it hard d ... Dyson Bagless Upright Vacuum DC41 Animal

Where is the reset button on my dyson dc24 - Dyson Ball DC24 Bagless Upright Vacuum


... Dyson Ball DC24 Bagless Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1035 seconds