Having problems with your Dyson DC14 Animal Bagless Upright Cyclonic Vacuum ?

It stopped sucking @ brush stopped turning - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


Answers :

Usually on this vacuum those two problems are not related, but if you got a lot of stuff stuck in the brushroll and in the suction tube at the same time it could happen. Check the belt to make sure it's not broken. If the vacuum is over a year old the belt should probably be replaced anyway, this can be expensive on some Dyson models. The first thing to check on suction is the filters. Most Dysons have two filters. The motor filter should be cleaned and thoroughly dried after each use. The exhaust filter should be replaced frequently, for most people once a year should do. If you do not clean and replace the filters often enough the suction will keep going down and down until there is not enough airflow to propel the dirt and debris through the vacuum into the dirt cup and it ends up getting stuck and clogging up the vacuum which can lead to expensive repairs.
Repair Help & Product Troubleshooting for Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

It stopped sucking @ brush stopped turning - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


Usually on this vacuum those two problems are not related, but if you got a lot of stuff stuck in the brushroll and in the suction tube at the same time it could happen. Check the belt to make sure it's not broken. If the vacuum is over a year old th ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Brush won't turn even though belt is fine - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


Hi.\015\012\015\012Ensure drive selector knob is not stuck on park or stop when you lower handle to vacuum if it is pull handle back & turn knob by hand to drive position.\015\012\015\012If you have done all this & sti ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

The brush wheel does not turn - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

The brush wont turn on my dyson DC 14 - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


Sounds\015\012 as if you need to replace the brush belt.JimLet me know if this helps. ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

I have dyson animal brush does not engage - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


Hi There, Ok so I have to ask the obvious is the dial set to 'carpet' assuming it is then there are only a couple of reasons why the roller would not spin. 1. Bearings in your roller are siezed and you need to replace them.2. The ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Dyson Animal handheld brush not turning - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi its Darran at Dyson.We would recommend checking it for a blockage and a removing any hair or fibres from the brush bar. As the brush bar relies on the suction power of your machine, it would be worth cleaning the filter and ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

How do I replace the brush on my dyson dc14 - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


Hi its Darran at Dyson. If your DC14 has a brush control, we would only recommend that a suitably trained person attempts to replace the brush bar. We can arrange a repair so that one of our engineers can replace this for you, ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Dyson dc14 brushes not turning - Dyson DC14 Bagless Upright Cyclonic Vacuum


Hi there, it's Jack at Dyson.I'm sorry to hear your DC14's brush bar isn't rotating. This could just mean that the brush control is set to 'Hard floors' rather than 'Carpets'. To check for this, please take a look at our Support guide: ... Dyson DC14 Bagless Upright Cyclonic Vacuum

Dyson dc15 animal brush won't turn - Dyson DC15 Animal Bagless Upright Cyclonic Vacuum


Hi there,Your DC15 is equipped with a sensor which shuts off the brushbar if something jams it. Once you've checked the cleaner head for obstructions and removed any threads or hair from the brushbar, you should be able to reset the machine. ... Dyson DC15 Animal Bagless Upright Cyclonic Vacuum

My dyson dc14 wont turn on - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

DYSON VACUUM BRUSH WON'T TURN - Dyson DC15 Animal Bagless Upright Cyclonic Vacuum


The problem will most likely be either with the PCB under a panel on the side of the chassis, or the small wires from it that feed the front brush motor. \012\012If you are technically inclined, you can ask for more detail on the repair here: ... Dyson DC15 Animal Bagless Upright Cyclonic Vacuum

Brushes not turning - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Is the motor operating when switched to "on " position? Is so I would have to assume that the belt is broken to the power brush /head. Did you happen to smell burning rubber at all when the brushes stopped working? Look in your manual for replaci ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Brush won't turn - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


\015\012\015\012Belt is broken. You will need to re[lace the clutch. Here is a video on how to do that. ht ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

The beater bar will not turn - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


Hi its Darran at Dyson.Make sure that the brush control dial on the cleaner head is in the correct position for use on carpets. It should be in the centre position when in the upright mode and then when the head is released into the clea ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Brush roller has stopped turning - Euro-Pro EP601 Bagless Upright Cyclonic Vacuum


Look on the bottom of the unit for a small reset switch button.I have not worked on this unit but many are similar. If you can hear the roller motor running you may need to replace the belt ... Euro-Pro EP601 Bagless Upright Cyclonic Vacuum

Brush doesn't spin when using. - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


Hi!!\012\012If you can turn the brush with your hand, the belt is either broken or off. Remove the bottom cover, (you'll need a Phillips screwdriver), to gain access to the brush compartment to replace belt. ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Brushes do not turn - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


HI there, \012There are a couple of reasons that your brushes may not spin. \0121. The hard floor / carpet dial is set to hard floor. \0122. The clutch to motor belt is broken\0123. The clutch to brush belt is broken.\01 ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

DC07 brush does not turn - belt intact - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi there, The problem is likely to be \012a) The selector on the front of your machine is set to hard floors\012b) The ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Brushes not moving - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


The DC14 has a "brush control system" operated by a knob on the right side of the base. This knob has two positions: "bare floors" (or "off") and "carpet" (or "auto"). The motor turns the roller only when the knob is on "carpet", and even then ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Have DC15...Brushbar stopped turning - Dyson DC14 All floors Bagless Upright Cyclonic Vacuum


\015\012\015\012http://www.espares.co.uk/datastore/ProductManuals/350256.pdf\015\012\015\012Check the above link to see if it ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

Stopped sucking! - Dyson DC14 Low Reach Bagless Upright Cyclonic Vacuum


Have you emptied the dirt and cleaned the filter? Hope this helps. Good luck! ... Dyson DC14 Low Reach Bagless Upright Cyclonic Vacuum

Brush not turning - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


That is usually caused by a worn, stretched or broken drive belt. Here is a link to the replacement belts you need and to a manual that you can view which has instructions. It's really simple. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Brush does not move - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


You need to replace the belts. Here is a link to the replacement belts you need:Dyson DC14 Belts ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

The brush not turning - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Belt could be worn, brushroll bearings could have gone. Even the clutch could be broken.Is the brushroll jammed? ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Brush not working - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


I had the same prob with mine forEVER! I thought the only solution was to return it to Dyson and spend almost $200 for the repair. Just doing the belt reset worked. The brush is now spinning again and I also have suction again! I LOVE my Dyson &l ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1902 seconds