Having problems with your Dyson DC14 Animal Bagless Upright Cyclonic Vacuum ?

My Dyson Animal is stuck in the upright position. Do you know how I get it to tilt?


Answers :

Repair Help & Product Troubleshooting for Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Dyson Animal is stuck in the upright position. Do you know how I get it to tilt?


... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

I can't get my animal Dyson to drop down for the brushes to pick up...it is stuck in the upright position. It is so frustrating that I can't get it to drop to vacuum the floor.


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dyson DC41 animal complete stuck in upright position - how do I get it down. Have been on hold with Dyson for hours.


The wheels are probably jammed and won't recline. Mine was stuck pretty bad, and after a half hour of trying to figure it out I just picked up the vacuum and slammed the wheels pretty hard, and it came loose. No problem since. Pushing on it hard d ... Dyson Bagless Upright Vacuum DC41 Animal

How do you get the thing to tilt? - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


If it is like my Dyson, there is a bar across the bottom back side, push it down with your foot. Mine has a picture of a foot on it. Thanks, good luck. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

I have the dyson animal. There is something stuck in the wand tube and everyting is getting caught on it. There is very little suction from the wand. How do I get the wand apart or somehow get the object stuck out of the tube? Thanks


Yes, things stuck in vacuum hoses are not always as easy to remove as one might think. Trying to push it out with something can be counter-productive, and only get the thing stuck tighter! If you have a second vacuum, you can try sucking it out the w ... Vacuums

I have a Dyson DC17 Animal Bagless Upright Cyclonic Vacuum and it lost suction. How do I get it fixed? Also, is it possible to get a second filter for this machine?


OK. Lost suction almost always means blockage. You need to check all the pipework, the hose and any bits you can remove at the base of the machine - if I remember right, the DC17 has a sort of U shaped bend at the bottom of the handle that you can re ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Have Dyson DC 14. When tilt to vacuum, the handle and coiled hose comes away from the unit. The problem started when the little purple ridged curved part on front of vacuum cleaner right below handle came loose and a spring fell out from somewhere--don't know where. I pushed on the purple ridge part and it snapped back on. Now, can't get it loose again, don't know where the spring goes, and handle still comes loose from vacuum.


I'm not positive whether or not this is the wand handle because there are several versions of the DC14. However the device the locks and unlocks the wand in place is pretty similar between all the versions.The first picture is the wand re ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Dc41 stuck in upright position - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi Patricia, it's Jack at Dyson.I'm sorry to hear you're having difficulty with your DC41 Animal. If it's stuck in the upright position, this may be due to a blockage in the changeover valve. This should be simple to resolve - please follow t ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

I cannot get my Dyson animal upright hoover to stand upright


There is a video tutorial here: \012\012 ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

I have a dyson animal dc17 vacuum and it totally died. Now I can't figure out which wires go where when I install my new motor. (motor #: 160906G) Do you happen to know where the various color wires go or a place I can see a diagram of the motor with wires attached? I should have taken a photo of it before tearing out the old motor. I don't know where to connect the three coming out from the upright portion of the machine and the red seems to go to a switch (?) and there is a black (connected t


... Vacuums

Dyson hard to tilt - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


Take the hose off at the bottom; there may be an obstruction down there. ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

How do i know if clutch is bad on dyson dc14 - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

I have a dyson DC07. The hose has come away from the hose end and the end is stuck in the top end of the wand as it sits in the upright position on the machine. Any ideas as how to get it out? If I can get it out it might just be a new hose. If not, it's a new hose and wand.t


... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

I cut all of the hair out of the bottom of the spin-brush on the Dyson Upright Animal Vacuum. Now I dont think I can get the brush back in there correctly. If I squeeze it in there (which it is a VERY tight fit...) then it wont spin. Any thoughts?


Check the roller ends for dirt build up, they pull off and you should be able to clean them out.\015\012The roller should just go back into place if pushed together. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

My cord gets hot is that normal? - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


Warm is normal for 12 amp appliances like most vacuums. Hot is not normal and you should have the unit serviced before any further use. ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Where do I get a new number 6 blue filter - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


Hey, this is Leland with Crucial Vacuum,\012\012Fortunately we carry replacements for that filter for your DC17!\012\012I have attached a link to our website with the correct filter you are looking for!\012---\012You can ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Roller ball stuck - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Most common problem is the motor filter inside the ball is not inserted properly, or it has jumped out. Take off the access panel on the ball and make sure it is properly inserted.Regards ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

I have a Dyson DC28 Animal and it is stuck in the upright position and the wand will not come all of the way out.


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Item stuck on brushbar how do I take apart - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


This video will show you ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

My Dyson animal seems to have an electrical issue that I am unable to pinpoint. Neither the wand nor the floor vac have any suction AT ALL. In fact the vac makes absolutely no sound and you wouldn't even know that it had power to it unless the rollers are turned on, the rollers work just fine. I had this problem start about a month ago and then it just started working again after messing with it for a while, now it has happened again and I am getting a little agitated! Please Help!!!!!!!!!!!


There is a filter inside the canister, and by your description it sounds like it needs to be cleaned. if you remove the filter and blow it out using a air compressor or using a slightly ridged brush and tapping the filter out this should solve your ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

I have a Dyson Animal upright (purple). I took it apart to clean the cyclone chambers. When re-assembling the bottom closed before the opening rod was inserted. I can't get the opening rod installed with the bottom opening closed. How do I open it? Thanks.


I looked in our DC07. I would try removing the top again and getting a long dowel or the opening rod, insert it down into the unit and PUSH. The opening rod opens the latch by pushing it, not pulling it. Here are some pictures of the latch. Top pi ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Why does my Dyson Animal Upright Vacuum power light turn red when I tilt it back to vacuum? It will work if I switch it to bare floors and don't need the beater brush.


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

I have a Animal Dyson DC07. While cleaning the filter I laid the vacuum down . Now I can not get it to stand upright


Have a look at the following link:\015\012\015\012http://www.dysonmedic.com/DC04%20Folder/DC04%20upright%20fix.html\015\ ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My Dyson DC27 Animal is stuck (Locked) in the upright position. Everything seems to be ok with no apparent cracks or breakages. I don't want to force it in case something snaps.


Dysons are notorious for this problem. You will have to just force it and clean any obstructions. ... Vacuums

Cannot get the brush roller back in properly - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


You could try checking out this video on dyson replacements\015\012\015\012good luck ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0840 seconds