Having problems with your Dyson DC14 Animal Bagless Upright Cyclonic Vacuum ?

Dyson DC 14 animal bagless--unable to use wand

\015 My DC 14 animal (purchased 2-26-05) has begun to make a lugging noise sometimes when I turn it off. It normally has great suction, but when using the wand, it sounds normal for just a few seconds, then sounds like the air intake plugs up, and it loses suction. The filter is clean, and I\342\200\231ve checked to assure that passages aren\342\200\231t blocked. The trained technician at Dyson thought it could be the clutch or the motor. What do you think?\015\012 \015\[email protected]\015

Answers :

Hi.
\015\012
\015\012Try these tests & tell me the results.
\015\012
\015\012Remove the hose & wand completely from the machine it unclips at the bottom of the back.
\015\012
\015\012Leave handle in full upright position & switch on do you still get the sound of something blocked ?
\015\012
\015\012If yes remove the (U) shaped inspection port again at bottom back of machine now repeat last test what happens ?
\015\012
\015\012Please reply with your answers.
\015\012
\015\012http://dysonmanuals.llc.nu/index.htm
\015\012
\015\012Chris.
Repair Help & Product Troubleshooting for Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dyson DC 14 animal bagless--unable to use wand


Hi.\015\012\015\012Try these tests & tell me the results.\015\012\015\012Remove the hose & wand completely from the machine it unclips at the bottom of the back.\015\012\015\012Leave handle in full upright ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

I cant remove my wand on my Dyson vacuum. - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


Hi its Darran at Dyson. It is possible that if the hose is blocked that the wand handle may become jammed. For help releasing this, please contact our Helpline on 0800 298 0298 (UK) or 1866MYDYSON (US) and one of our advisors can talk yo ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

How to use dyson belt remover - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


Click on the link below and watch vide, it will show you all the tools you need and how to chang both beltshttp://www.youtube.com/watch?v=7_CtaFcc5HU ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Wand on dyson dc 17 is clogged - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


Hi there,If you've noticed a blockage in your DC17's wand, you should be able to remove this using something like a garden cane to dislodge it, after separating the wand from the end of the hose. Take care not to damage the wand when you do t ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dyson D28 wand suction - Dyson DC28 Animal Bagless Upright Vacuum


... Dyson DC28 Animal Bagless Upright Vacuum

Using dyson on stairs does not **** properly - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


Hi there,If you need any help or advice on using your Dyson, please do not hesitate to contact our Helpline on 0800 298 0298 (UK) or 1866MYDYSON (US). Kind regardsDarranDyson Customer Service ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Dyson dc07 animal bagless


You probably have a blockage somewhere in the hose or in the base where the hose goes in. Remove the plastic tube at the base of the hose by simply unclicking it and remove the obstruction. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My Dyson DC17 Animal brush roller makes noise when it is spinning but not when using the wand. The belt around the roller seems fine and it is not plugged. What else can I check for?


Need replaced belt and Brushbar Assy\015\012Brushbar Assy part no:911961-01\015\012Belt part no: 911710-01 ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dc17 wand and hose problems - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

A burning smell when in use - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Martinsivyer: Turn the machine upside-down and see if you can turn the beater/brush bar with your hand. You should see the brush turning and feel the resistance from the motor. The brush/beater bar may be binding, and what you are smelling ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Wand will not come out of machine - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

How to open up the wand - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Lift up the red circular slotted tab and pull up on the large red knob-looking hose end. when you pull it up it will extend and then you can pull the whole arm off to use it. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My Dyson DC17 Animal brush roller makes noise when it is spinning but not when using the wand. The belt around the roller seems fine and it is not plugged. What else can I check for?


Hi its Darran at Dyson. You may find it useful to remove the soleplate from the base of the machine and make sure that the brush bar is fitted correctly. Once this is done, make sure there are no hairs or threads wrapped aroun ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

My Dyson animal seems to have an electrical issue that I am unable to pinpoint. Neither the wand nor the floor vac have any suction AT ALL. In fact the vac makes absolutely no sound and you wouldn't even know that it had power to it unless the rollers are turned on, the rollers work just fine. I had this problem start about a month ago and then it just started working again after messing with it for a while, now it has happened again and I am getting a little agitated! Please Help!!!!!!!!!!!


There is a filter inside the canister, and by your description it sounds like it needs to be cleaned. if you remove the filter and blow it out using a air compressor or using a slightly ridged brush and tapping the filter out this should solve your ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

My Dyson Animal will not turn on when in upright position or when using the wand. It will, however, start when in the rug vacuuming position (leaned back).


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

The wand does not have much suction - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


Here is a link to a YouTube video that walks you through the steps to check for obstructions which may cause your low wand suction problem. If you are getting good suction from the vacuum itself, an obstruction between the motor and the wand head is ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

My Dyson canister DC 17 animal will not stay attached to the wand. I have to tape the two parts together to use it. Any ideas?


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

WHAT MATERIALS WERE USED TO MAKE THE DYSON DC07-ANIMAL BAGLESS UPRIGHT VACUUM


Go to www.dyson.com to contact the Dyson in your country. I'm sure they'll have a good idea of what materials were used. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Loud whining noise when in use - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


Hi there its Darran at Dyson here. Sorry to hear of the problem with your DC17. It is possible that there is a blockage somewhere in the machine which is causing the noise. To check this, please visit our website at www.dyson ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Brush doesn't spin when using. - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


Hi!!\012\012If you can turn the brush with your hand, the belt is either broken or off. Remove the bottom cover, (you'll need a Phillips screwdriver), to gain access to the brush compartment to replace belt. ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Loss of suction with hoss & wand with my Dyson Animal bagless - will only work as an upright.


It sounds like you have a clog through the hose. Take the entire hose off of the unit and stick a broomstick through, if it comes out the other end without anything coming with it. The clog is in the sweep below the unit. If your mechanically incline ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson DC14 Animal will not work while upright to use the wand.


1.0-1= ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

My dyson animal does not seem to have the suction that it used to when vaccuming but wand works good. It seems to push debrie.


... Dyson DC14 Bagless Upright Cyclonic Vacuum

Dyson DC14 Animal: Loses suction when in the upright postion and I am using the wand. I have cleaned the top spongy filter. It sort of 'blows' out of the top of the cylinder if that makes sens


Hi Sharon,I'm sorry to hear you're having difficulties with your DC14. If the machine doesn't seem to be picking up as well as usual through the wand, this may be due to a blockage in the wand, hose or U-bend. The easiest way to check for thi ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

DC14 DYSON ANIMAL BAGLESS UPRIGHT - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0658 seconds