Having problems with your Dyson DC14 Animal Bagless Upright Cyclonic Vacuum ?

Dyson animal will not stand up and question concerning lifetime hepa filter

\015 My dyson will not stand up by itself=catch seems to have failed and online instructions from dyson have not solved the problem- can anyone help\015\012my second question is will dyson replace my lifetime hepa filter that is located beneath the debris collector, it is very black and is not washable\015

Answers :

I also spoke to Dyson about the Hepa filter located over the motor cover. It says Lifetime & Permanent, but all they give you is double talk and say its for the life of the vacuum, which means nothing, because the vacuum is fine, but the lifetime hepa filter is bad or to clogged up so the motor overheats and shuts off. They also said this was not meant for the owner to replace, and take it to a shop to do this. This is a bunch of BS. They would sell me a new one for $30.00. They first said I can clean it in water but I could tell it was not made to go in water which their supervisor confirmed. How can Dyson put Lifetime on a part when it means nothing. They are at the least false advertising.
Http://geeksquad.fixya.com/ThreadView.aspx?prdid=34163&thid=630085
\015\012Dyson animal will not stand up and question...
\015\012Posted by madmimi on May 28, 2008
\015\012my dyson will not stand up by itself=catch seems to have failed and online instructions from dyson have not solved the problem- can anyone help
my second question is will dyson replace my lifetime hepa filter that is located beneath the debris collector, it is very black and is not washable

\015\012
\015\012Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure.

\015\012In answer to your 1st question, you may want to check with a factory authorized vac dealer who does repair on the Dyson vacuums to see if they can correct the problem, or call the Dyson factory phone # listed below for the nearest vac dealer in your area. 2nd question. The Hepa filter is mostly a wear item and I was not aware of the lifetime Hepa filter and that also would be a good question for the factory to answer, I could not find an answer to the questions and they might be able to clarify the answer to both your questions. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
\015\012http://www.dyson.com/
\015\012Dyson Inc. 600 W. Chicago Suite 275 Chicago, Illinois 60610
\015\012Customer Service 1-866-693-9766 [email protected]
\015\012http://www.a-1vacuum.com/ 1-800-657-1874 Customer Service
\015\012Thanks, Don the Vac Man
Go Ahead. Use Us.
Repair Help & Product Troubleshooting for Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dyson animal will not stand up and question concerning lifetime hepa filter


I also spoke to Dyson about the Hepa filter located over the motor cover. It says Lifetime & Permanent, but all they give you is double talk and say its for the life of the vacuum, which means nothing, because the vacuum is fine, but the lifetime ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Does my Dyson Animal vacuum have a hepa filter?


The HEPA filter is not a cleanable item. The pre-motor filter is the washable one. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My Dyson DC07 is screaming load. I have replaced the lifetime filter and the hepa filters. I also replaced the clutch and brush. I took the canister apart and cleaned it. It works, but is so loud something else must be wrong


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

I HAVE A DYSON DC07 I HAVE CHECKED ALL HOSES AND PLASTIC ATTACHMENT SECTIONS , CANNOT FIND ANY BLOCKAGE ANYWHERE IN THE SYSTEM .THE BELT IS GOOD AND THE BEATER BAR IS ROTATING WELL , BUT THIS VACUUM WILL NOT PICK UP ANY THING. I DID NOTICE THAT THE HEPA LIFETIME FILTER IS BLACK AND NOT SURE IF IT CAN BE WASHED OR CLEANED. THANKS BOB!


I have just cleaned mine just a half an hour ago - SAME PROBLEM !!\015\012ok take the dust cylinder off the vacuum cleaner and take the plastic clear cylinder off - there is a clear clip one side and you might need a small knife to unclip other ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Clutch replacement I have a dyson DC7 animal that is having a clutch problem, I have the repair manual on how to do it, my question is what other things should be replaced while I have it all apart. ( ie belts, filters, etc? ) The unit is about 2-3 years old and this is the frst problem we have had with it


Go to http://www.youtube.com/watch?v=7_CtaFcc5HU to see how to remove clutch. ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

I have a Animal Dyson DC07. While cleaning the filter I laid the vacuum down . Now I can not get it to stand upright


Have a look at the following link:\015\012\015\012http://www.dysonmedic.com/DC04%20Folder/DC04%20upright%20fix.html\015\ ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

No suction --need new hepa filter - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Dyson collecting debris/hair, ect on top of hepa filter?


Called Dyson today about the cyclone canister clogging in my DC17 Animal. Turns out it's a problem with the black rubber gasket in the bottom of the canister. This also causes the HEPA filter to get lots of dirt and debris on top of it. They ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Dyson DC14 suction still poor after all cleaning and new pre filter set.


... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

I have just replaced my Dyson DC14 Motor and now it blows the hepa filter out and filter cap off from under the bin the air is really hot. Is something wrong?


This video on the link below may help youhttp://www.youtube.com/watch?v=6HQx-gFA3MI ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

Dyson animal will not stand upright - Dyson DC25 Animal Bagless Upright Vacuum


Hi there,I'm sorry to hear you're having difficulty standing your DC25 Animal upright. It sounds as if the stabiliser needs realigning. This is simple to do - please follow the steps shown in the video below.If you'd like any further ... Dyson DC25 Animal Bagless Upright Vacuum

My dyson animal won't stand up - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


Hi do you still require assistance with this? ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

How to remove hepa filter on dyson 18 - Dyson Slim DC18 All Floors HEPA Bagless Upright Vacuum - Iron/Titanium/Yellow


How do I remove hepa filter, and how many filters does it have? ... Dyson Slim DC18 All Floors HEPA Bagless Upright Vacuum - Iron/Titanium/Yellow

My dyson DC07 animal does not have the suction it once had I saw a dyson program that showed a filter in the top of the canister I was just aware of the filter around the wheel. Is there one on top of the canister and how do you get to it


Hi\012\012The DC04 Dyson has a filter at the top, but the DC07 has one at the side on the bottom and one underneath the cylender.\012\012Take all the parts off your dyson and throw them in the washing machine and then put them ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Hepa filter on dyson dc01


Not sure about you model, but some of the dyson's have the hepa filter under the dirt container. Remove the container, there is a cover that comes off and the filter is under that cover. ... Vacuums

I have a Dyson Animal DC 28. It vacuums fine on floor mode, but, when locked in the upright position it releases pressure though the little valve behind filter a. I have only had it for 2 weeks so I'm hoping the filters don't need to be cleaned this often! I would like to finish vacuuming without waiting 24hrs for the filters to dry.


Unfortunately with any bagless vacuum the filters do need to be cleaned or replaced very frequently for the vacuum to perform. But the good news is it sounds like you have a clog in the hose. remove the attachment hose as you would be using it and un ... Vacuums

My dyson DC07 Hepa will not stand by it self Some


Hi there, I have made a video of the solution to this problem. Just click on the link and foll ... Dyson DC07 Bagless Upright Cyclonic Vacuum

How do you remove the HEPA filter on Dyson DC07


I use a screw driver to pry them up.\015\012Joe ... Dyson Vacuums

How to clean Dyson vacuum hepa filter?


... Dyson DC18 all floors Bagless Upright Cyclonic Vacuum

Clogged filter my problem is with the filter it is always blocked with hair and debris, it makes a high pitched sound when it is clogged up and i don't why but it is not going into the canister. i have an animal dyson. any suggestions?


I found that the rubber seal on the bottom of my cyclone is not properly seated to the bottom of canister, I guessed when I removed the clear canister bin completely from cyclone unit for cleaning, I put the cyclone down on the floor and rubber seal ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson DC 14 hose has no suction, with or without brush attachments. Hot air shoots out from the base of the canister when I try to use the hose. I cleaned the top filter, but can't figure out how to remove the hepa filter to clean it without destroying the case. It looks like it might take three hands to insert pennies and "flip" the case open as is suggested on a youtube video for a different model. Would this even help, assuming I could get the thing open?


... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

My dyson animal works wonderfully well without the pre filter on, when I put the pre filter on it looses complete suction


It needs a new filter or the filter needs washing. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

HEPA post-filter on Dyson DC25 doesn't stay secure causing the ball not to roll smoothly. the red button keeps popping causing the filter to pop up enough to cause the ball not to spin freely.


... Dyson Ball HEPA Upright Bagless Vacuum - Iron/Satin Yellow

Dyson animal loses suction when I let the handle down from the upright position to use, I've cleaned the foam filter, and the plastic filter holder and dried thoroughly, removed and cleared the right side U-bend, and the center, rear U-bend access, also made sure nothing was in the way of the beater bar. Any thoughts? thanks. lorri


Is the noise a loud screaming or a grinding/vibration? The screaming is an air flow problem and you'll want to check your hoses are clear and all the seals are tight. The grinding is an issue with the roller/belt/clutch/motor/housing. From what I'm r ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

How do you clean hepa filter on dyson dc05 - Dyson DC07 Bagless Upright Cyclonic Vacuum


You can use compressed air to blow it out ... Dyson DC07 Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0728 seconds