Having problems with your Dyson DC14 Animal Bagless Upright Cyclonic Vacuum ?

Changing the main hose on a Dyson DC15 Animal

\015 I got a replacement hose from Dyson for my DC15 Animal. However, I can't see how to release the bottom fitting. Thank you\015\012-Bob Walker\015

Answers :

Hi Bob.
\015\012
\015\012If you look carefully where hose & elbow jount enter machine you will see a slot.
\015\012Rotate elbow so that lug on elbow aligns with slot & pull off.
\015\012
\015\012http://dysonmanuals.llc.nu
Repair Help & Product Troubleshooting for Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Changing the main hose on a Dyson DC15 Animal


Hi Bob.\015\012\015\012If you look carefully where hose & elbow jount enter machine you will see a slot.\015\012Rotate elbow so that lug on elbow aligns with slot & pull off.\015\012\015\012 ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

I need to change out the short hose on the underside of my older Dyson DC 07 Animal (Light Purple). It is the one less than a foot long on the underside which is attached on one end to the main body of the vacuum(I was able to remove this one) and the top of the upper soleplate. The latter one seems to be glued or otherwise permanently attached.Any assistance you could give me on this would be greatly appreciated....Thanks


Hello Cynthia,\015\012\015\012It's not glued, but it can be a little difficult to remove. You need to twist and pull at the same time and it should pull off. If it's being stubborn, squirt a little bit of WD40 / penetrating fluid where th ... Vacuums

My Dyson dc15 animal roller brush will not turn off when I push the on/off switch....changed the fuse but still will not turn off. Help!


... Dyson DC15 Animal Bagless Upright Cyclonic Vacuum

OUR DYSON DC 17 ANIMAL HAS A SMELL OF ABOUT 50 DOGS THAT HAVEN'T HAD BATHS FOR A YEAR.. WE HAVE TWO DOGS IN THE HOUSE AND THEY ARE KEPT CLEAN. WE'VE WASHED THE CANISTER, THE FILTER,BRUSHED OUT THE HOSES.. NO CHANGE... ANY IDEAS?


Try buying "Citronella" from an essential oils dealer (maybe eBay?) Apply 6-12 drops on the paper filter element...you'll LOVE the smell.P.S. Haven't you asked this question before? ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dyson dc15 animal brush won't turn - Dyson DC15 Animal Bagless Upright Cyclonic Vacuum


Hi there,Your DC15 is equipped with a sensor which shuts off the brushbar if something jams it. Once you've checked the cleaner head for obstructions and removed any threads or hair from the brushbar, you should be able to reset the machine. ... Dyson DC15 Animal Bagless Upright Cyclonic Vacuum

Dyson Animal hose collapses when using attachment hose


You have a clog in either your hose or your wand. You need to take off the wand and hose and inspect them. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

HOW DO I CHANGE THE MAINS POWER CABLE ON A DYSON DC07? my wife cought the cable under the dyson and has stripped it to bare wires so i need to change the cable. i have taken a cover off near where the cable goes into the machine but now cannot get any further


How to open the cover near the cable for dyson upright vacuum ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Changing belt on a dyson DC17 Animal - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


This video should help you out. \012\012 ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dyson animal 17 hose not working - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Change the Hepa filter on Dyson dc15 - Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum


Now for a proper answer haha,\012\012Remove the bin and underneath you will find a large disc (filter holder) that the bin in sits on. This needs to be removed. Its not as easy as it should be either.\012\012Lay the machine flat on a ... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

Replace Dyson dc 17 Animal hose - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

CHANGE BELT ON DYSON ANIMAL - Dyson DCO7 Animal Bagless Upright Cyclonic Vacuum


Try this link which is a YouTube video on replacing the clutch assembly. It is more extensive than what you need but does cover the steps you will take to change the belt. Here is the link: \015\012\015\012 ... Dyson DCO7 Animal Bagless Upright Cyclonic Vacuum

Loss of suction on dyson animal hose - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


There may be an obstruction in the hose. Hold it up to the light then I use a long thin broom handle to push the clogged hair through it, being careful not to split the hose. This always does the trick for me. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Change belt on dyson dc07 animal - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

The suction in the hose of my 2 year old Dyson Animal vacuum is compromised. I may have sucked up a small cat toy or something. Regular vac still is fine. The hose "sucks closed" after a few seconds near the top. I love my Dyson! Please help.


Hi there, it sounds as though the wand handle is blocked. To test this, remove the wand handle from the hose and test the suction at the top of the hose. If its strong here, then you will need to remove the blockage from the wand handle. If the suc ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dyson D15 Animal is clogged, both in hose and in bottom


Take pipe off and push a bamboo or somthing simular down hose ... Dyson DC15 Animal Bagless Upright Cyclonic Vacuum

Changing the belt on a dyson dc14 - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

How do you change the belt on a dyson DC 27 - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


Hi its Darran at Dyson. The belt on this machine is part of the clutch mechanism and as such we only recommend that a suitably qualified engineer carries out any repairs to this. If you would like to talk through the options w ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dyson DC14 won't change suction from hose to floor tool after hose is replaced in handle


Try cleaning everything in the vacuum cleaner, hoses and filters and where you collect the dirt. Something must be plugging it up. If you have any brushes check to see if thread or hair is rolled around into it. ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

Dyson will not switch on - Dyson DC15 Animal Bagless Upright Cyclonic Vacuum


Usual problem is the fuse in the plug. Check the fuse first. If this fails then your problem is either the Switch (Unlikley) or the Motor. Its unlikely the motor would break without warning though. If you have had any burning smells or funny noises r ... Dyson DC15 Animal Bagless Upright Cyclonic Vacuum

How do you change a belt on a dyson 07 - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


You want this part.http://www.sparesaverusa.com/vacuum-spares/dyson/dc07/dyson-dc07-parts/belt-changing-tool-for-dyson.html ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My dyson dc17 animal will pick up via the hose attachment but there is no suction when you use the regular vaccuum on the floor - you can hear the difference in the suction once you put the floor part down - we took it apart - cleaned it - checked all hoses - still does not work????


Hi its Darran at Dyson.Check that the brush control dial is in the centre position when upright and then moves forward when the head is released. If the brush bar is still not spinning when switched on in the vacuuming position, check th ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

My dyson DC04 started to **** a dog toy up the main bit with the brushes - stopped it immediately and removed the toy but since then the suction is still ok/strong with the extension hose picking up but no suction is getting to main scetion/brush area - sounds like a pipe is disconnected from the front area - nothing obvious on the surface....HELP! Thanks in anticipation........... Julie Price


Get a different brand vacuum. Dyson's are easily the worst vacuum I've ever owned. I've tried the DC14, DC25 and DC33 they are all heavy plastic POS's made in Malaysia. I've owned every kind of vacuum under the sun. Rainbow, Kirby, Oreck, Riccar, Seb ... Vacuums

How to change brush belt on dco7 dyson - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


This depends on whether your DC07 has a brush control clutch or not. For excellent illustrated guidance go to www.dysonmedic.com and click on DC07. For belt change on a model without clutch click on "belt and brushroll". It's simple! For models with ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My Dyson Animal is not picking up very well in the drive position. With the hose the pick up is still very good. I have had it for 2 yrs now with very little problems. I have cleaned out all areas etc pipes, the brush underneath and cant find any blockages. The noise of the dyson is the same as usual. Could you tell me if there is a part that it sounds like it needs?


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0606 seconds