Having problems with your Dyson DC14 Bagless Upright Cyclonic Vacuum ?

Dyson dc14 brushes not turning - Dyson DC14 Bagless Upright Cyclonic Vacuum


Answers :

Hi there, it's Jack at Dyson.


I'm sorry to hear your DC14's brush bar isn't rotating. This could just mean that the brush control is set to 'Hard floors' rather than 'Carpets'. To check for this, please take a look at our Support guide:


http://www.dyson.co.uk/support/dc14/dc14-all-floors/my-machine-is-not-working/i-can-see-something-wrong-visual/i-can-see-something-wrong-visual/my-brushbar-is-not-rotating2/does-the-brushbar-turn-with-the-power-on


If you'd like further advice after running through these checks, you can reach our freephone customer Helpline on 0800 298 0298 (UK), or 1-866-693-9766 (US).


Best wishes,


Jack
Dyson Online Customer Support
http://www.dyson.com
Repair Help & Product Troubleshooting for Dyson DC14 Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dyson dc14 brushes not turning - Dyson DC14 Bagless Upright Cyclonic Vacuum


Hi there, it's Jack at Dyson.I'm sorry to hear your DC14's brush bar isn't rotating. This could just mean that the brush control is set to 'Hard floors' rather than 'Carpets'. To check for this, please take a look at our Support guide: ... Dyson DC14 Bagless Upright Cyclonic Vacuum

The brush wont turn on my dyson DC 14 - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


Sounds\015\012 as if you need to replace the brush belt.JimLet me know if this helps. ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Brush does not turn - Dyson DC14 Bagless Upright Cyclonic Vacuum


... Dyson DC14 Bagless Upright Cyclonic Vacuum

The brushes won't turn - Dyson DC14 Bagless Upright Cyclonic Vacuum


The belt may need repacing if not, then something si jammed up in there,. these are fairly easy to dismantle and put back together..,.Best regardsCk ... Dyson DC14 Bagless Upright Cyclonic Vacuum

The brush wheel does not turn - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Brush won't turn even though belt is fine - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


Hi.\015\012\015\012Ensure drive selector knob is not stuck on park or stop when you lower handle to vacuum if it is pull handle back & turn knob by hand to drive position.\015\012\015\012If you have done all this & sti ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

It stopped sucking @ brush stopped turning - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


Usually on this vacuum those two problems are not related, but if you got a lot of stuff stuck in the brushroll and in the suction tube at the same time it could happen. Check the belt to make sure it's not broken. If the vacuum is over a year old th ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

My dyson dc14 wont turn on - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

How do I replace the brush on my dyson dc14 - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


Hi its Darran at Dyson. If your DC14 has a brush control, we would only recommend that a suitably trained person attempts to replace the brush bar. We can arrange a repair so that one of our engineers can replace this for you, ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

DYSON VACUUM BRUSH WON'T TURN - Dyson DC15 Animal Bagless Upright Cyclonic Vacuum


The problem will most likely be either with the PCB under a panel on the side of the chassis, or the small wires from it that feed the front brush motor. \012\012If you are technically inclined, you can ask for more detail on the repair here: ... Dyson DC15 Animal Bagless Upright Cyclonic Vacuum

Dyson Animal handheld brush not turning - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi its Darran at Dyson.We would recommend checking it for a blockage and a removing any hair or fibres from the brush bar. As the brush bar relies on the suction power of your machine, it would be worth cleaning the filter and ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Brushes will not turn on dyson dc 18 - Dyson DC18 all floors Bagless Upright Cyclonic Vacuum


... Dyson DC18 all floors Bagless Upright Cyclonic Vacuum

Brush doesn't spin. no suction felt at brush - Dyson DC14 All floors Bagless Upright Cyclonic Vacuum


Check that the brush has not become fouled with string, etc. If it still doesn't work try the following.\015\012\015\012Some Dyson's have a switch for the brush on the front of the handle. If yours does, please make sure its on. This m ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

I have dyson animal brush does not engage - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


Hi There, Ok so I have to ask the obvious is the dial set to 'carpet' assuming it is then there are only a couple of reasons why the roller would not spin. 1. Bearings in your roller are siezed and you need to replace them.2. The ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Belt won't turn on my dyson - Dyson DC14 All floors Bagless Upright Cyclonic Vacuum


Either the belt is burnt stretched! broken or the roller has debrise' around the bearing ends and got it stuck ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

How to change the carbon brushes on my dc14 - Dyson DC14 All floors Bagless Upright Cyclonic Vacuum


... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

Dyson dc07 brush not turning belt is intact? - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


DC07s have two drive ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

My dyson dc 14 does not turn on - Dyson DC14 All floors Bagless Upright Cyclonic Vacuum


Misplaced directions, where is the turn on ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

Dyson dc30 brush bar not spinning - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

My Dyson DC 14 brush does not spin - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


It sounds like a worn belt or broken belt. The belt should be fairly snug. ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Dyson dc15 animal brush won't turn - Dyson DC15 Animal Bagless Upright Cyclonic Vacuum


Hi there,Your DC15 is equipped with a sensor which shuts off the brushbar if something jams it. Once you've checked the cleaner head for obstructions and removed any threads or hair from the brushbar, you should be able to reset the machine. ... Dyson DC15 Animal Bagless Upright Cyclonic Vacuum

The brush quit turning while i was vacuuming - Dyson DC07 Bagless Upright Cyclonic Vacuum


Could be some debris is caught in brush or belt broke. ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Brush is not turning - Dyson DC07 Bagless Upright Cyclonic Vacuum


Hello. generally when the brush will not turn it is either clogged with debris or the drive belt is broken. Check for debris first and remove whatever you find. then see if there is resistance when you manually turn the brushes. Joe ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Roller does not turn - Dyson DC14 Bagless Upright Cyclonic Vacuum


It sounds as though you need to replace the drive belt. The necessary part is available from http://www.espares.co.uk/dyson/dc04/p/1086/716/4. Fitting it is tricky, but guidance is available from http://www.dysonmedic.com/DC04%20Folder/DC04%20belt%20 ... Dyson DC14 Bagless Upright Cyclonic Vacuum

Brushes not turning - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Is the motor operating when switched to "on " position? Is so I would have to assume that the belt is broken to the power brush /head. Did you happen to smell burning rubber at all when the brushes stopped working? Look in your manual for replaci ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1162 seconds