Having problems with your Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum ?

My dyson upright keeps spitting out what is being vacummed up.


Answers :

You have a clog in your system. Clear the port behind the brushroll/ the hose/ and the area leading up to the dirt container. This should solve your problem.
Repair Help & Product Troubleshooting for Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My dyson upright keeps spitting out what is being vacummed up.


You have a clog in your system. Clear the port behind the brushroll/ the hose/ and the area leading up to the dirt container. This should solve your problem. ... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

My dyson dc01 fan belt keeps breaking - Dyson DC07 Bagless Upright Cyclonic Vacuum


Ok 1st check that the roller is free to move otherwise it will stress the belt..next no sharps on roller guide or brush roll to cut into belt..Please leave feedback ... Dyson DC07 Bagless Upright Cyclonic Vacuum

The belt on my Dyson vacuum keeps breaking - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


SWITH OFF POWER AT SOCKET AND REMOVE\012\012REMOVE BOTTOM PLATE IF COMPETENT TO DO SO REMOVE ROLLER ASSEMBLY REMOVE ONE SIDE OF BEARING COVER AND SLIDE OUT AXLE CLEAN BOTH BEARING COVERS OF DUST AND DEBRIS ALASO FIRST CHECK FOR ITEMS JAMM ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Broken Dyson Our Dyson will not stand upright -- it falls flat on the floor as if the catch that keeps it up is broken. Any ideas for a quick fix before I send it in for repairs? Thanks, Please send any responses to; [email protected]


Hi, I went to the Dyson site, searched for the problem AND found the solution -- to hold a button while lifting the rear of the machine up and it clicked back into place. I knew there was a button somewhere but there are soooo many buttons!!\015\012\ ... Dyson DC07 Bagless Upright Cyclonic Vacuum

I bought a Eurika upright vacum (the boss whirlwind lite) it is pretty new, keeps shutting off before i am done vacuming, and the hose doesnt **** very well!!!


Your model mite have a divice that turns the motor off if it heats up if so take it to a repair shop and have them look at it ... Vacuums

My dyson dc 25 ball vacume brush won't turn - Dyson Ball DC24 Bagless Upright Vacuum


... Dyson Ball DC24 Bagless Upright Vacuum

How to unplug a dyson vacume - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


Hi there,I'm sorry to hear you're having difficulties with your DC17. If the machine seems to be blocked, our online troubleshooting guide should be useful in finding and clearing any obstructions: ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Schematic for dyson DC 14 vacum - Dyson DC14 Bagless Upright Cyclonic Vacuum


... Dyson DC14 Bagless Upright Cyclonic Vacuum

Why does my dyson vac keep snapping belts - Dyson DC04 HEPA Bagless Upright Cyclonic Vacuum


You are probably jamming up the brushes, check to see if brushes move freely and are free of hair or string buildup or any other items blocking them from spinning ... Dyson DC04 HEPA Bagless Upright Cyclonic Vacuum

Dyson vacum beater bar does not work - Dyson DC14 Bagless Upright Cyclonic Vacuum


DC14 have two drive ... Dyson DC14 Bagless Upright Cyclonic Vacuum

My DYSON DC07 upright vacum


The actuator in the switch is defective, you can replace just the switch. There are several places to get just the switch, just google "dyson dc07 parts" for places on where to get the switch. ... Dyson DC07 Bagless Upright Cyclonic Vacuum

The F1 fuse on the PCB in my Dyson upright keeps blowing.


... Dyson Ball DC24 Bagless Upright Vacuum

My DC 26 turbine head keeps stopping - Dyson DC25 All Floors Bagless Upright Vacuum


... Dyson DC25 All Floors Bagless Upright Vacuum

My Dyson will not turn on unless I pull the handle back. I have take the entire vacum apart cleaned all blockage and it still will not turn on in the upright position.


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

The front roller is not working on my Dyson DC24 upright vacum cleaner. I can't find a belt in the front assembly.


Hi, it's Jack at Dyson.\015\012\015\012You may be able to resolve your problem by following these simple steps: \015\012http://ww ... Dyson Ball DC24 Bagless Upright Vacuum

Filter keeps falling out of ball - Dyson Ball DC24 Bagless Upright Vacuum


... Dyson Ball DC24 Bagless Upright Vacuum

A large screw got sucked up the vacuum. Since then the motor,which I replaced probably only 12 months ago, sounds very "winey" and when you stand the dyson upright the front brush still keeps going round instead of stopping. Any ideas? David


Sounds like the clutch mechanism has somehow been damaged.\015\012\015\012Have a look at the following site which is a great source of info on faults, dismantling, repairing and re-assembling:\015\012\015\012 ... Dyson DC07 Bagless Upright Cyclonic Vacuum

The on/off switch won't depress and keep the vacumn on I have a Dyson dc14 animal upright


Hi there,Sorry to hear you're having a problem with your DC14. So we can assist you, please call us free, on 08002980298 (UK), or 1866MYDYSON (US). We can run through some checks over the phone, and arrange service if necessary. ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Brushes won't turn but vacume runs - Dyson DC07 Bagless Upright Cyclonic Vacuum


I suggest you check the drive belt, located under a cover on the bottom of the unit. It may appear to be good (tight and not worn) but 9 times out of 10 that is the problem. ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Roller brush does not turn when vacum is on - Dyson DC07 Bagless Upright Cyclonic Vacuum


The belt is broken or stretched. You can get replacement belts for the DC07 here:Belt for DC07 with clutch ... Dyson DC07 Bagless Upright Cyclonic Vacuum

There is a rubber valve on the top of Dyson DC14 all floors. When the vacum is locked in its upright position or the hand wand is used there is a whistling sound coming out of the valve. When the vac is used as a floor vac, it does not make the sound. Is this something that I can fix? Is there an obstruction somewhere that would be causing this sound? thank you.


The Fixya user in this repair is giving out personal contact information rather then helping the customer out on the Fixya board. This defeats the whole purpose of Fixya if the "TheDysonTeam" just gives out his phone number and helps the customer o ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

The vacuum is spitting dirt out the back - Dyson DC07 Bagless Upright Cyclonic Vacuum


... Dyson DC07 Bagless Upright Cyclonic Vacuum

Thermal fuse keeps cutting in, Is there any way to check motor before replacing it. on a dyson upright cyclone model


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Wand hard to pull out from my dyson dc17 upright vacum cleaner


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

The beater bar keeps shutting off - Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum


... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0489 seconds